DIY/open-battery-information-web
1
0
Fork 0
Code Issues Pull Requests Actions 1 Packages Projects Releases Wiki Activity
Files
d719b34e03647b0018510428a03baa3c54db5962
open-battery-information-web/firmware/avrdude.conf
T

24654 lines
891 KiB
Plaintext
Raw Normal View History

Initial commit
2026-08-19 21:35:27 +03:00
# $Id$ -*- text -*-
#
# AVRDUDE Configuration File
#
avrdude_conf_version = "7.3";
# This file contains AVRDUDE's default configuration data describing
# programming hardware pinouts and part definitions. Normally, it
# requires AVRDUDE be of the same or higher version than above string.
# AVRDUDE's -C command line option specifies the location of the
# configuration file. The -c option names the programmer configuration
# which must match one of the entry's id parameter. The -p option
# identifies which part AVRDUDE is going to be programming and must
# match one of the parts' id parameters.
#
# DO NOT MODIFY THIS FILE. Modifications will be overwritten the next
# time a "make install" is run. For user-specific additions, use the
# "-C +filename" command line option.
#
# Possible entry formats are:
#
# programmer
# parent <id> # optional parent
# id = <id1> [, <id2> ... ] ; # <idN> are quoted strings
# desc = <description> ; # quoted string
# type = <type>; # programmer type, quoted string
# # list known types with -c ?type
# prog_modes = PM_<i/f> {| PM_<i/f>} # interfaces, eg, PM_SPM|PM_PDI (1)
# is_serialadapter = <yes|no> # programmer is also a serialadapter
# extra_features = HAS_<fea> {| HAS_<fea>} # extra features, eg, HAS_SUFFER (2)
# connection_type = parallel | serial | usb | spi
# baudrate = <num> ; # baudrate for avr910-programmer
# vcc = <pin1> [, <pin2> ... ] ; # pin number(s) (3)
# buff = <pin1> [, <pin2> ... ] ; # pin number(s)
# reset = <pin> ; # pin number
# sck = <pin> ; # pin number
# sdo = <pin> ; # pin number
# sdi = <pin> ; # pin number
# tck = <pin> ; # pin number
# tdi = <pin> ; # pin number
# tdo = <pin> ; # pin number
# tms = <pin> ; # pin number
# errled = <pin> ; # pin number
# rdyled = <pin> ; # pin number
# pgmled = <pin> ; # pin number
# vfyled = <pin> ; # pin number
# usbvid = <hexnum> ; # USB vendor ID
# usbpid = <hexnum> [, <hexnum> ...] ; # USB product ID (4)
# usbdev = <interface> ; # USB interface or other device info
# usbvendor = <vendorname> ; # USB Vendor Name
# usbproduct = <productname> ; # USB Product Name
# usbsn = <serialno> ; # USB Serial Number
# hvupdi_support = <num> [, <num>, ... ] ; # UPDI HV Variants Support
# ;
#
# # Notes
# #
# # (1) The following program modes are known:
# # - PM_SPM: Bootloaders, self-programming with SPM opcodes or NVM Controllers
# # - PM_TPI: Tiny Programming Interface (t4, t5, t9, t10, t20, t40, t102, t104)
# # - PM_ISP: SPI programming for In-System Programming (almost all classic parts)
# # - PM_PDI: Program and Debug Interface (xmega parts)
# # - PM_UPDI: Unified Program and Debug Interface
# # - PM_HVSP: High Voltage Serial Programming (some classic parts)
# # - PM_HVPP: High Voltage Parallel Programming (most non-HVSP classic parts)
# # - PM_debugWIRE: Simpler alternative to JTAG (a subset of HVPP/HVSP parts)
# # - PM_JTAG: Joint Test Action Group standard (some classic parts)
# # - PM_JTAGmkI: Subset of PM_JTAG, older parts, Atmel ICE mkI
# # - PM_XMEGAJTAG: JTAG, some XMEGA parts
# # - PM_AVR32JTAG: JTAG for 32-bit AVRs
# # - PM_aWire: AVR32 parts
# #
# # (2) The following extra programmer features are known:
# # - HAS_SUFFER: Only present on Xplained Mini/Nano programmers.
# # The Super User Fantastic Feature Enable Register allows the user to modify
# # the behavior of the mEDBG programmer/debugger chip. See the Xplained Mini/Nano
# # documentation for more information
# # - HAS_VTARG_SWITCH: Programer has a programmable target power switch
# # - HAS_VTARG_READ: Programmer can read the target voltage
# # - HAS_VTARG_ADJ: Programmer has an adjustable target power source that can
# # be controlled with Avrdude
# # - HAS_FOSC_ADJ: Programmer has a programable frequency generator that
# # can clock an AVR directly through its XTAL1 pin
# # - HAS_VAREF_ADJ: Programmer has an adjustable analog reference voltage that
# # can be controlled with Avrdude
# #
# # (3) To invert the polarity of a pin use a tilde: ~<num>
# # To invert the polarity of all pins in a list use ~(<num1> [, <num2> ... ])
# #
# # (4) Not all programmer types can process a list of PIDs
#
# serialadapter # same as programmer albeit only for usb parameters
# parent <id> # optional serialadapter or programmer parent
# id = <id1> [, <id2> ... ] ; # <idN> are quoted strings
# desc = <description> ; # quoted string
# baudrate = <num> ; # optional default baudrate, eg, in .avrduderc
# usbvid = <hexnum> ; # USB vendor ID
# usbpid = <hexnum> [, <hexnum> ...] ; # list of USB product IDs
# usbsn = <serialno> ; # USB Serial Number in per-user .avrduderc
# ;
#
# part
# desc = <description> ; # quoted string, the long part name, eg, "ATmega328p"
# id = <id> ; # quoted string, normally an abbreviated part name
# variants = <str1> [, <str2> ...]; # quoted strings, each starts with "<alt-name>: ..."
# family_id = <id> ; # quoted string, eg, "megaAVR" or "tinyAVR"
# prog_modes = PM_<i/f> {| PM_<i/f>} # interfaces, eg, PM_SPM|PM_ISP|PM_HVPP|PM_debugWIRE
# mcuid = <num>; # unique id in 0..2039 for 8-bit AVRs
# n_interrupts = <num>; # number of interrupts, used for vector bootloaders
# n_page_erase = <num>; # if set, number of pages erased during SPM erase
# n_boot_sections = <num>; # Number of boot sections
# boot_section_size = <num>; # Size of (smallest) boot section, if any
# hvupdi_variant = <num> ; # numeric -1 (n/a) or 0..2
# devicecode = <num> ; # deprecated, use stk500_devcode
# stk500_devcode = <num> ; # numeric
# avr910_devcode = <num> ; # numeric
# has_jtag = <yes/no> ; # part has JTAG i/f (deprecated, use prog_modes)
# has_debugwire = <yes/no> ; # part has debugWire i/f (deprecated, use prog_modes)
# has_pdi = <yes/no> ; # part has PDI i/f (deprecated, use prog_modes)
# has_updi = <yes/no> ; # part has UPDI i/f (deprecated, use prog_modes)
# has_tpi = <yes/no> ; # part has TPI i/f (deprecated, use prog_modes)
# is_avr32 = <yes/no> ; # AVR32 part (deprecated, use prog_modes)
# is_at90s1200 = <yes/no> ; # AT90S1200 part
# signature = <num> <num> <num> ; # signature bytes
# usbpid = <num> ; # DFU USB PID
# chip_erase_delay = <num> ; # microseconds
# reset = dedicated | io ;
# retry_pulse = reset | sck ;
# # STK500 parameters (parallel programming IO lines)
# pagel = <num> ; # page load pin name in hex, eg, 0xD7
# bs2 = <num> ; # byte select 2 pin name in hex, eg, 0xA0
# serial = <yes/no> ; # can use serial downloading
# parallel = <yes/no/pseudo> ; # can use parallel programming
# # STK500v2 parameters, to be taken from Atmel's ATDF files
# timeout = <num> ;
# stabdelay = <num> ;
# cmdexedelay = <num> ;
# synchloops = <num> ;
# bytedelay = <num> ;
# pollvalue = <num> ;
# pollindex = <num> ;
# predelay = <num> ;
# postdelay = <num> ;
# pollmethod = <num> ;
# hvspcmdexedelay = <num> ;
# # STK500v2 HV programming parameters, from ATDFs
# pp_controlstack = <num>, <num>, ... ; # PP only
# hvsp_controlstack = <num>, <num>, ... ; # HVSP only
# flash_instr = <num>, <num>, <num> ;
# eeprom_instr = <num>, <num>, ... ;
# hventerstabdelay = <num> ;
# progmodedelay = <num> ; # PP only
# latchcycles = <num> ;
# togglevtg = <num> ;
# poweroffdelay = <num> ;
# resetdelayms = <num> ;
# resetdelayus = <num> ;
# hvleavestabdelay = <num> ;
# resetdelay = <num> ;
# synchcycles = <num> ; # HVSP only
# chiperasepulsewidth = <num> ; # PP only
# chiperasepolltimeout = <num> ;
# chiperasetime = <num> ; # HVSP only
# programfusepulsewidth = <num> ; # PP only
# programfusepolltimeout = <num> ;
# programlockpulsewidth = <num> ; # PP only
# programlockpolltimeout = <num> ;
# # debugWIRE and/or JTAG ICE mkII parameters, also from ATDF files
# allowfullpagebitstream = <yes/no> ;
# enablepageprogramming = <yes/no> ;
# idr = <num> ; # IO addr of IDR (OCD) reg
# rampz = <num> ; # IO addr of RAMPZ reg
# spmcr = <num> ; # mem addr of SPMC[S]R reg
# eecr = <num> ; # mem addr of EECR reg
# eind = <num> ; # mem addr of EIND reg
# mcu_base = <num> ; # MCU control block in ATxmega devices
# nvm_base = <num> ; # NVM controller in ATxmega devices
# ocd_base = <num> ; # OCD module in AVR8X/UPDI devices
# syscfg_base = <num> ; # Chip revision ID in AVR8X/UPDI devices
# ocdrev = <num> ; # JTAGICE3 parameter from ATDF files
# pgm_enable = <instruction format> ;
# chip_erase = <instruction format> ;
# # parameters for bootloaders
# autobaud_sync = <num> ; # autobaud detection byte, default 0x30
# factory_fcpu = <num> ; # F_CPU in Hz on reset and factory-set fuses
#
# memory <memstr>
# paged = <yes/no> ; # yes/no (flash of classic parts only)
# offset = <num> ; # memory offset
# size = <num> ; # bytes
# page_size = <num> ; # bytes
# num_pages = <num> ; # numeric
# initval = <num> ; # factory setting of fuses and lockbits
# bitmask = <num> ; # bits used (only in fuses and lockbits)
# n_word_writes = <num> ; # TPI only: if set, number of words to write
# min_write_delay = <num> ; # micro-seconds
# max_write_delay = <num> ; # micro-seconds
# readback = <num> <num> ; # pair of byte values
# readback_p1 = <num> ; # byte value (first component)
# readback_p2 = <num> ; # byte value (second component)
# pwroff_after_write = <yes/no> ; # yes/no
# mode = <num> ; # STK500 v2 file parameter from ATDF files
# delay = <num> ; # "
# blocksize = <num> ; # "
# readsize = <num> ; # "
# read = <instruction format> ;
# write = <instruction format> ;
# read_lo = <instruction format> ;
# read_hi = <instruction format> ;
# write_lo = <instruction format> ;
# write_hi = <instruction format> ;
# loadpage_lo = <instruction format> ;
# loadpage_hi = <instruction format> ;
# writepage = <instruction format> ;
# ;
# ;
#
# If any of the above parameters are not specified, the default value
# of 0 is used for numerics (except for mcuid, hvupdi_variant, ocdrev,
# initval and bitmask, all of which default to -1, and for autobaud_sync
# which defaults to 0x30), or the empty string "" for string values. If
# a required parameter is left empty, AVRDUDE will complain. Almost all
# occurrences of numbers (with the exception of pin numbers and where
# they are separated by space, eg, in signature and readback) can also
# be given as simple expressions involving arithemtic and bitwise
# operators.
#
# Parts can also inherit parameters from previously defined parts
# using the following syntax. In this case specified integer and
# string values override parameter values from the parent part. New
# memory definitions are added to the definitions inherited from the
# parent. If, however, a new memory definition refers to an existing
# one of the same name for that part then, from v7.1, the existing
# memory definition is extended, and components overwritten with new
# values. Assigning NULL removes an inherited SPI instruction format,
# memory definition, control stack, eeprom or flash instruction, eg,
# as in memory "efuse" = NULL;
#
# part parent <id> # quoted string
# id = <id> ; # quoted string
# <any set of other parameters from the list above>
# ;
#
# NOTES:
# * 'devicecode' is the device code used by the STK500 (see codes
# listed below)
# * Not all memories will implement all instructions
# * AVR Fuse bits and Lock bits are implemented as a type of memory
# * Example memories are:
# "flash", "eeprom", "fuse", "lfuse" (low fuse), "hfuse" (high
# fuse), "signature", "calibration", "lock"
# * The memory specified on the avrdude command line must match
# one of the memories defined for the specified chip
# * The pwroff_after_write flag causes avrdude to attempt to
# power the device off and back on after an unsuccessful write to
# the affected memory area if VCC programmer pins are defined. If
# VCC pins are not defined for the programmer, a message
# indicating that the device needs a power-cycle is printed out.
# This flag was added to work around a problem with the
# at90s4433/2333's; see the at90s4433 errata at:
#
# https://www.microchip.com/content/dam/mchp/documents/OTH/ProductDocuments/DataSheets/doc1042.pdf
#
# INSTRUCTION FORMATS
#
# Instruction formats are specified as a comma separated list of
# string values containing information (bit specifiers) about each
# of the 32 bits of the instruction. Bit specifiers may be one of
# the following formats:
#
# '1' = the bit is always set on input as well as output
#
# '0' = the bit is always clear on input as well as output
#
# 'x' = the bit is ignored on input and output and set as 0
#
# 'a' = the bit is an address bit; from v 7.1 the bit-number
# is set to match the right bit position for the
# instruction to "just work"
#
# 'aN' = the bit is the Nth address bit, bit-number = N, i.e., a12
# is address bit 12 on input, a0 is address bit 0.
#
# 'i' = the bit is an input data bit (can optionally be followed
# by a memory bit position between 0 and 7 if that differs
# from the bit-position in the SPI write command byte)
#
# 'o' = the bit is an output data bit (can optionally be followed
# by a memory bit position between 0 and 7)
#
# Each instruction must be composed of 32 bit specifiers. The
# instruction specification closely follows the instruction data
# provided in Atmel's data sheets for their parts. Note that flash
# addresses always refer to *word* addresses whilst all other
# memory types specify *byte* addresses.
#
# Example for signature read on the ATmega328P:
# read = "0 0 1 1 0 0 0 0", "0 0 0 x x x x x",
# "x x x x x x a1 a0", "o o o o o o o o";
#
# As the address bit numbers in the SPI opcodes are highly
# systematic, they don't really need to be specified. A compact
# version of the format specification neither uses bit-numbers for
# address lines nor spaces. If such a string is longer than 7
# characters, then the characters 0, 1, x, a, i and o will be
# recognised as the corresponding bit, whilst any of the characters
# ., -, _ or / can act as arbitrary visual separators, which are
# ignored. Examples:
#
# loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
#
# loadpage_lo = "0100.0000", "000x.xxxx", "xxaa.aaaa", "iiii.iiii";
#
#
# The following are STK500 part device codes to use for the
# "devicecode" field of the part. These came from Atmel's software
# section avr061.zip which accompanies the application note
# AVR061 available from:
#
# https://ww1.microchip.com/downloads/en/Appnotes/doc2525.pdf
#
#define ATTINY10 0x10 /* the _old_ one that never existed! */
#define ATTINY11 0x11
#define ATTINY12 0x12
#define ATTINY15 0x13
#define ATTINY13 0x14
#define ATTINY22 0x20
#define ATTINY26 0x21
#define ATTINY28 0x22
#define ATTINY2313 0x23
#define AT90S1200 0x33
#define AT90S2313 0x40
#define AT90S2323 0x41
#define AT90S2333 0x42
#define AT90S2343 0x43
#define AT90S4414 0x50
#define AT90S4433 0x51
#define AT90S4434 0x52
#define ATMEGA48 0x59
#define AT90S8515 0x60
#define AT90S8535 0x61
#define AT90C8534 0x62
#define ATMEGA8515 0x63
#define ATMEGA8535 0x64
#define ATMEGA8 0x70
#define ATMEGA88 0x73
#define ATMEGA168 0x86
#define ATMEGA161 0x80
#define ATMEGA163 0x81
#define ATMEGA16 0x82
#define ATMEGA162 0x83
#define ATMEGA169 0x84
#define ATMEGA323 0x90
#define ATMEGA32 0x91
#define ATMEGA64 0xA0
#define ATMEGA103 0xB1
#define ATMEGA128 0xB2
#define AT90CAN128 0xB3
#define AT90CAN64 0xB3
#define AT90CAN32 0xB3
#define AT86RF401 0xD0
#define AT89START 0xE0
#define AT89S51 0xE0
#define AT89S52 0xE1
# The following table lists the devices in the original AVR910
# appnote:
# |Device |Signature | Code |
# +-------+----------+------+
# |tiny12 | 1E 90 05 | 0x55 |
# |tiny15 | 1E 90 06 | 0x56 |
# | | | |
# | S1200 | 1E 90 01 | 0x13 |
# | | | |
# | S2313 | 1E 91 01 | 0x20 |
# | S2323 | 1E 91 02 | 0x48 |
# | S2333 | 1E 91 05 | 0x34 |
# | S2343 | 1E 91 03 | 0x4C |
# | | | |
# | S4414 | 1E 92 01 | 0x28 |
# | S4433 | 1E 92 03 | 0x30 |
# | S4434 | 1E 92 02 | 0x6C |
# | | | |
# | S8515 | 1E 93 01 | 0x38 |
# | S8535 | 1E 93 03 | 0x68 |
# | | | |
# |mega32 | 1E 95 01 | 0x72 |
# |mega83 | 1E 93 05 | 0x65 |
# |mega103| 1E 97 01 | 0x41 |
# |mega161| 1E 94 01 | 0x60 |
# |mega163| 1E 94 02 | 0x64 |
# Appnote AVR109 also has a table of AVR910 device codes, which
# lists:
# dev avr910 signature
# ATmega8 0x77 0x1E 0x93 0x07
# ATmega8515 0x3B 0x1E 0x93 0x06
# ATmega8535 0x6A 0x1E 0x93 0x08
# ATmega16 0x75 0x1E 0x94 0x03
# ATmega162 0x63 0x1E 0x94 0x04
# ATmega163 0x66 0x1E 0x94 0x02
# ATmega169 0x79 0x1E 0x94 0x05
# ATmega32 0x7F 0x1E 0x95 0x02
# ATmega323 0x73 0x1E 0x95 0x01
# ATmega64 0x46 0x1E 0x96 0x02
# ATmega128 0x44 0x1E 0x97 0x02
#
# These codes refer to "BOOT" device codes which are apparently
# different than standard device codes, for whatever reasons
# (often one above the standard code).
# There are several extended versions of AVR910 implementations around
# in the Internet. These add the following codes (only devices that
# actually exist are listed):
# ATmega8515 0x3A
# ATmega128 0x43
# ATmega64 0x45
# ATtiny26 0x5E
# ATmega8535 0x69
# ATmega32 0x72
# ATmega16 0x74
# ATmega8 0x76
# ATmega169 0x78
#
# Overall avrdude defaults; suitable for ~/.config/avrdude/avrdude.rc
#
default_parallel = "unknown";
default_serial = "unknown";
default_spi = "";
# default_baudrate = 115200;
# default_bitclock = 2.5;
default_linuxgpio = "unknown";
allow_subshells = no;
#
# PROGRAMMER DEFINITIONS
#
#------------------------------------------------------------
# dryrun
#------------------------------------------------------------
# Using -c dryrun is a good way to get acquainted with AVRDUDE and its
# command line -U memory operations, -T terminal commands or the
# interactive terminal -t. No hardware needs to be connected, as the
# dryrun programmer emulates what can be expected to happen with a real
# -c programmer and a corresponding connected physical programmer or a
# directly connected board when it has a bootloader.
#
# Examples:
# avrdude -c dryrun -p ATmega328P -t # Interactive terminal: enter help
# avrdude -c dryrun -p ATmega2560 -U flash:w:myapplication.hex:i
# avrdude -c dryrun -p AVR64DB48 -Tconfig
programmer # dryrun
id = "dryrun";
desc = "Emulates programming without a programmer";
type = "dryrun";
prog_modes = PM_TPI | PM_ISP | PM_PDI | PM_UPDI | PM_HVSP | PM_HVPP | PM_aWire;
;
#------------------------------------------------------------
# dryboot
#------------------------------------------------------------
# Like -c dryrun the -c dryboot programmer only emulates programming,
# albeit for communicating to bootloaders, ie, without a physical
# programmer between the host and the target AVR part. AVRDUDE behaves
# slightly different when talking to a bootloader: Whilst for most classic
# parts the flash memory looks like NOR-memory, ie, cleared bits cannot be
# set and therefore programming requires a chip erase first, bootloaders
# do have the power of erasing a flash page (setting it to all 0xff)
# before writing a page. This requires AVRDUDE to behave differently when
# talking to a bootloader, which it recognises by the prog_modes = PM_SPM
# setting below. -c dryboot allows exploring these differences at an
# emulation level.
programmer # dryboot
id = "dryboot";
desc = "Emulates bootloader programming without a programmer";
type = "dryrun";
prog_modes = PM_SPM;
;
#------------------------------------------------------------
# wiring
#------------------------------------------------------------
# http://wiring.org.co/
# Basically STK500v2 protocol, with some glue to trigger the bootloader
programmer # wiring
id = "wiring";
desc = "Wiring for bootloader using STK500 v2 protocol";
type = "wiring";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# arduino
#------------------------------------------------------------
# Serves optiboot bootloaders and others using the STK500v1 protocol;
# it is superseded by the more modern -c urclock programmer, see below.
# The programmer is named after the popular embedded programming
# environment Arduino that has for a long time used optiboot
# bootloaders. Same as the stk500v1 except that it resets the attached
# board and treats EEPROM as the optiboot bootloaders expect.
programmer # arduino
id = "arduino";
desc = "Arduino for bootloader using STK500 v1 protocol";
type = "arduino";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# urclock
#------------------------------------------------------------
# Serves urboot and optiboot bootloaders
# - Reads/writes flash/EEPROM via the MCU bootloader and a serial connection
# - Automatically resets an attached board via RTS/DTR into bootloader mode
# - Implements urprotocol, a skeleton version of STK500v1
# - Supports vector bootloaders by patching interrupt vectors during upload:
# + Vector bootloaders run on all parts, no need for a HW boot section
# + Can be much smaller than the smallest HW boot section of a part, eg,
# 256 bytes for ATmega2560 (smallest HW boot section is 1024 bytes)
# - Checks sizes of applications so they don't overwrite the bootloader
# - Keeps the bootloader alive during interactive terminal sessions
# - Provides a 4-byte metadata interface in top flash for
# + Allowing applications to utilise unused flash similar to EEPROM
# + Storing in top flash the file name and its last-modified date
# + Displaying file name and date of the last uploaded application
#
# See https://github.com/stefanrueger/urboot
programmer # urclock
id = "urclock";
desc = "Urclock programmer for urboot bootloaders using urprotocol";
type = "urclock";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# xbee
#------------------------------------------------------------
# The XBeeBoot bootloader provides XBee Series 2 Over-The-Air
# firmware update capability as well as supporting direct
# firmware update via the stk500v1 protocol. See
# https://github.com/davidsainty/xbeeboot
# for details.
programmer # xbee
id = "xbee";
desc = "XBee for Series 2 Over-The-Air (XBeeBoot) bootloader using STK500 v1 protocol";
type = "xbee";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# ft2232h
#------------------------------------------------------------
# FTDI USB to serial converters can be used for ISP programming of
# classic AVRs, and quite a few programmers are based on this. The
# ft2232h programmer, named after the FTDI converter chip,
# interfaces with the chips on these programmers (and more):
# - http://real.kiev.ua/old/avreal/en/adapters
# - http://www.amontec.com/jtagkey.shtml and .../jtagkey-tiny.shtml
# - http://www.olimex.com/dev/arm-usb-ocd.html, arm-usb-tiny.html
# - http://www.ethernut.de/en/hardware/turtelizer/index.html
# - https://web.archive.org/web/20161221220118/http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.html
# - http://dangerousprototypes.com/docs/FT2232_breakout_board
# - http://flashrom.org/FT2232SPI_Programmer
#
# The programmer will look for a specific device and use the first
# one found. If you have multiple devices, and they give out serial
# numbers, a different entry for each of them can be created in a
# per-user ~/.avrduderc or avrdude.rc entry and the usbsn = "...";
# field added to distinguish between them.
#
# Avrftdi-type programmers utilise the Multi-Protocol Synchronous Serial
# Engine (MPSSE) of the FTDI ICs, which determines the pin numbers for the
# main ISP signals (sck, sdo, sdi). The reset pin can differ, though.
#
# Data sheet of the FT2232H chip:
# https://ftdichip.com/wp-content/uploads/2020/08/DS_FT2232H.pdf
programmer # avrftdi
id = "avrftdi", "2232h";
desc = "FT2232H/D based generic programmer";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6010;
usbdev = "A";
# ISP-signals - lower ADBUS-Nibble (default)
reset = 3; # AD3 (TMS)
sck = 0; # AD0 (TCK)
sdo = 1; # AD1 (TDI)
sdi = 2; # AD2 (TDO)
;
#------------------------------------------------------------
# ft2232h
#------------------------------------------------------------
# The ft2232h programmer is the same as above 2232h but it can be
# used to address the port of a particular board via -P ft2232h
programmer parent "2232h" # ft2232h
id = "ft2232h";
is_serialadapter = yes;
;
#------------------------------------------------------------
# 2232HIO
#------------------------------------------------------------
# This is an implementation of the above 2232h with a buffer IC
# (74AC244) and 4 LEDs directly attached, all active low.
programmer parent "2232h" # 2232hio
id = "2232hio";
desc = "2232hio based on FT2232H with buffer and LEDs";
buff = ~4;
# LED SIGNALs
errled = ~11;
rdyled = ~14;
pgmled = ~13;
vfyled = ~12;
;
#------------------------------------------------------------
# tigard
#------------------------------------------------------------
# Tigard - FT2232H based multi-protocol tool for hardware hacking
# https://github.com/tigard-tools/tigard
programmer parent "2232h" # tigard
id = "tigard";
desc = "Tigard interface board";
usbdev = "B";
# Reset is different to the FT2232H; sck, sdo, sdi remain at 0, 1, 2
reset = 5; # BD5 (GPIOL1)
;
#------------------------------------------------------------
# avrisp-u
#------------------------------------------------------------
# Kanda's low cost FT2232H based programmer. Uses a different reset pin.
# Adds a buffer and a LED indicating that the programming is in progress.
# https://www.kanda.com/products/Kanda/AVRISP-U.html
programmer parent "2232h" # avrisp-u
id = "avrisp-u";
desc = "Kanda AVRISP-U";
usbsn = "AVR";
buff = ~5;
reset = 4;
pgmled = ~10;
;
#------------------------------------------------------------
# ft2232h_jtag
#------------------------------------------------------------
# Here a FTDI ft2232h chip is used for JTAG programming.
programmer # ft2232h_jtag
id = "ft2232h_jtag";
desc = "FT2232H based generic JTAG programmer";
type = "avrftdi_jtag";
prog_modes = PM_JTAG;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6010;
usbdev = "A";
# JTAG-signals - lower ADBUS-Nibble (default)
tck = 0; # AD0 (TCK)
tdi = 1; # AD1 (TDI)
tdo = 2; # AD2 (TDO)
tms = 3; # AD3 (TMS)
;
#------------------------------------------------------------
# ft4232h
#------------------------------------------------------------
# The FT4232H can be treated as FT2232H but with a different USB
# device ID of 0x6011
programmer parent "ft2232h" # ft4232h
id = "ft4232h";
desc = "FT4232H based generic programmer";
usbpid = 0x6011;
;
#------------------------------------------------------------
# 4232h
#------------------------------------------------------------
programmer parent "2232h" # 4232h
id = "4232h";
desc = "FT4232H based generic programmer";
usbpid = 0x6011;
;
#------------------------------------------------------------
# jtagkey
#------------------------------------------------------------
programmer # jtagkey
id = "jtagkey";
desc = "Amontec JTAGKey, JTAGKey-Tiny and JTAGKey2";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
# Note: This PID is used in all JTAGKey variants
usbpid = 0xcff8;
usbdev = "A";
buff = ~4;
# ISP-signals => 20 - Pin connector on JTAGKey
# The colours are on the 20 pin breakout cable from Amontec
reset = 3; # TMS 7 violet
sck = 0; # TCK 9 white
sdo = 1; # TDI 5 green
sdi = 2; # TDO 13 orange
# VTG VREF 1 brown with red tip
# GND GND 20 black
;
#------------------------------------------------------------
# ft232h
#------------------------------------------------------------
programmer # ft232h
id = "ft232h";
desc = "FT232H based generic programmer";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
is_serialadapter = yes;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6014;
usbdev = "A";
# ISP-signals
reset = 3; # AD3 (TMS)
sck = 0; # AD0 (TCK)
sdo = 1; # AD1 (TDI)
sdi = 2; # AD2 (TDO)
;
#------------------------------------------------------------
# ft232h_jtag
#------------------------------------------------------------
programmer # ft232h_jtag
id = "ft232h_jtag";
desc = "FT232H based generic JTAG programmer";
type = "avrftdi_jtag";
prog_modes = PM_JTAG;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6014;
usbdev = "A";
# JTAG-signals
tck = 0; # AD0 (TCK)
tdi = 1; # AD1 (TDI)
tdo = 2; # AD2 (TDO)
tms = 3; # AD3 (TMS)
;
#------------------------------------------------------------
# um232h
#------------------------------------------------------------
# Pin J2-7 (AD0) is SCK
# Pin J2-8 (AD1) is SDO
# Pin J2-9 (AD2) is SDI
# Pin J2-10 (AD3) is RESET
# Pin J2-6 is GND
# Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
# a 16MHz Atmega1280 to program reliably. The 232H is conveniently 5V tolerant.
programmer parent "ft232h" # um232h
id = "um232h";
desc = "UM232H module from FTDI";
is_serialadapter = no;
;
#------------------------------------------------------------
# c232hm
#------------------------------------------------------------
# Orange (Pin 2) is SCK
# Yellow (Pin 3) is SDO
# Green (Pin 4) is SDI
# Brown (Pin 5) is RESET
# Black (Pin 10) is GND
# Use the -b flag to set the SPI clock rate eg -b 3750000 is the fastest I could get
# a 16MHz Atmega1280 to program reliably. The 232H is conveniently 5V tolerant.
programmer parent "um232h" # c232hm
id = "c232hm";
desc = "C232HM cable from FTDI";
;
#------------------------------------------------------------
# o-link
#------------------------------------------------------------
# On the adapter you can read "O-Link". On the PCB is printed "OpenJTAG v3.1".
# You can find it as "OpenJTAG ARM JTAG USB" in the internet. Note there are also
# several projects called Open JTAG, which are completely different. Some other
# sources call it O-Link or just have a look at ebay ... It is basically the same
# entry as jtagkey with different usb ids. See www.100ask.net
programmer parent "jtagkey" # o-link
id = "o-link";
desc = "O-Link, OpenJTAG ARM JTAG USB";
usbvid = 0x1457;
usbpid = 0x5118;
usbvendor = "www.100ask.net";
usbproduct = "USB<=>JTAG&RS232";
;
#------------------------------------------------------------
# openmoko
#------------------------------------------------------------
# http://wiki.openmoko.org/wiki/Debug_Board_v3
programmer # openmoko
id = "openmoko";
desc = "Openmoko debug board (v3)";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
usbvid = 0x1457;
usbpid = 0x5118;
usbdev = "A";
reset = 3; # TMS 7
sck = 0; # TCK 9
sdo = 1; # TDI 5
sdi = 2; # TDO 13
;
#------------------------------------------------------------
# lm3s811
#------------------------------------------------------------
# Only Rev. A boards.
# Schematic and user manual: http://www.cs.put.poznan.pl/wswitala/download/pdf/811EVBK.pdf
programmer # lm3s811
id = "lm3s811";
desc = "Luminary Micro LM3S811 Eval Board (Rev. A)";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0xbcd9;
usbdev = "A";
usbvendor = "LMI";
usbproduct = "LM3S811 Evaluation Board";
# Enable correct buffers
buff = 7;
# ISP-signals - lower ACBUS-Nibble (default)
reset = 3;
sck = 0;
sdo = 1;
sdi = 2;
;
#------------------------------------------------------------
# tumpa
#------------------------------------------------------------
# First SPI connector
# User manual: https://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual
programmer parent "2232h" # tumpa
id = "tumpa";
desc = "TIAO USB Multi-Protocol Adapter";
usbpid = 0x8a98;
usbvendor = "TIAO";
;
#------------------------------------------------------------
# tumpa-b
#------------------------------------------------------------
# Second SPI connector
programmer parent "tumpa" # tumpa-b
id = "tumpa-b";
usbdev = "B";
;
#------------------------------------------------------------
# tumpa_jtag
#------------------------------------------------------------
programmer parent "ft2232h_jtag" # tumpa_jtag
id = "tumpa_jtag";
desc = "TIAO USB Multi-Protocol Adapter (JTAG)";
usbpid = 0x8a98;
usbvendor = "TIAO";
buff = ~11;
reset = 4; # RST AD4 (Pin 15)
;
#------------------------------------------------------------
# ktlink
#------------------------------------------------------------
# Kristech KT-LINK FT2232H interface with IO switching and voltage buffers.
# Created on 20220410 by CeDeROM Tomasz CEDRO (www.cederom.io).
# Interface DataSheet: https://kristech.pl/files/KT-LINK-UM-ENG.pdf
#
# AVRDUDE FT2232H PIN NUMBER DECODE:
# | 0 | 1 | .. | 7 | 8 | 9 | .. | 15 |
# | ADBUS0 | ADBUS1 | .. | ADBUS7 | ACBUS0 | ACBUS1 | .. | ACBUS7 |
#
# KT-LINK JTAG CONN:
# 1=Vsense(->EXT13), 19=5V(EXT1->EXT3), 20=GND, 3=TPIRST, 9=TPICLK, 7=TPIDATA.
#
# INTERNALS CONFIGURATION ("~" MEANS ACTIVE LOW):
# ~TRST_EN=10(ACBUS2), ~CLK_EN=14(ACBUS6), ~SDO_EN=13(ACBUS5),
# TMS_SEL=5(ADBUS5), ~TMS_EN=12(ACBUS4), LED=~15(ACBUS7).
#
# CONNECTION NOTES:
# * Connect EXT connector pin 1 with 3 to get 5V on JTAG connector pin 19.
# * Connect JTAG connector pin 1 to 5V (i.e. EXT pin 13 or JTAG pin 19).
# * For TPI connection use resistors: TDO --[470R]-- TPIDATA --[470R]-- TDI.
# * Powering target from JTAG pin 19 allows KT-LINK current measurement.
programmer # ktlink
id = "ktlink";
desc = "KT-LINK FT2232H interface with IO switching and voltage buffers";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0xbbe2;
usbdev = "A";
buff = 5, ~10, ~13, ~14;
reset = 8;
sck = 0;
sdo = 1;
sdi = 2;
rdyled = ~15;
;
#------------------------------------------------------------
# digilent-hs2
#------------------------------------------------------------
# Digilent JTAG HS2 programmer. FT232H-based dongle with buffers.
# https://digilent.com/reference/_media/reference/programmers/jtag-hs2/jtag-hs2_rm.pdf
programmer # digilent-hs2
id = "digilent-hs2";
desc = "Digilent JTAG HS2 (MPSSE)";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6014;
usbdev = "A";
buff = 5, 6, 7;
reset = 3;
sck = 0;
sdo = 1;
sdi = 2;
;
#------------------------------------------------------------
# flyswatter2
#------------------------------------------------------------
# FT2232H based JTAG programmer. Requires a buff pin to be set.
# https://www.tincantools.com/flyswatter2
programmer # flyswatter2
id = "flyswatter2";
desc = "TinCan Tools Flyswatter 2";
type = "avrftdi";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x0403;
usbpid = 0x6010;
usbdev = "A";
usbvendor = "TinCanTools";
usbproduct = "Flyswatter2";
buff = ~6;
reset = 3;
sck = 0;
sdo = 1;
sdi = 2;
rdyled = ~11;
pgmled = ~12;
;
#------------------------------------------------------------
# serialupdi
#------------------------------------------------------------
# The SerialUPDI programmer implementation is based on the
# Microchip pymcuprog utility. In a nutshell, this programmer
# consists of simple USB->UART adapter, diode and couple of
# resistors. It uses serial connection to provide UPDI interface.
# See https://github.com/microchip-pic-avr-tools/pymcuprog
# for details.
programmer # serialupdi
id = "serialupdi";
desc = "SerialUPDI";
type = "serialupdi";
prog_modes = PM_UPDI;
connection_type = serial;
hvupdi_support = 1;
;
#------------------------------------------------------------
# avrisp
#------------------------------------------------------------
# The original RS232 based Atmel AVR ISP programmer
programmer # avrisp
id = "avrisp";
desc = "Atmel AVR ISP";
type = "stk500";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# avrispv2
#------------------------------------------------------------
programmer # avrispv2
id = "avrispv2";
desc = "Atmel AVR ISP v2";
type = "stk500v2";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# avrispmkII
#------------------------------------------------------------
# Atmel AVR ISP mkII programmer. See
# https://www.microchip.com/en-us/development-tool/atavrisp2
# for details.
programmer # avrispmkII
id = "avrispmkII", "avrisp2";
desc = "Atmel AVR ISP mkII";
type = "stk500v2";
prog_modes = PM_TPI | PM_ISP | PM_PDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
;
#------------------------------------------------------------
# buspirate
#------------------------------------------------------------
# Bus Pirate in AVR programming mode (hardware v3 and v4).
# See http://dangerousprototypes.com/docs/Bus_Pirate
# for details.
#
# PIN ISP
# > 1 GND
# 2 (3.3V)
# 3 (5.0V)
# 4
# 5
# 6 (XTAL1)
# 7 SCK
# 8 SDO
# 9 RST
# 10 SDI
programmer # buspirate
id = "buspirate";
desc = "The Bus Pirate";
type = "buspirate";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# buspirate_bb
#------------------------------------------------------------
# Bus pirate in bit banging mode (hardware v3 and v4).
programmer # buspirate_bb
id = "buspirate_bb";
desc = "The Bus Pirate (bitbang interface, supports TPI)";
type = "buspirate_bb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
# pins are bits in bitbang byte (numbers are 87654321)
# 1|POWER|PULLUP|AUX|SDO|CLK|SDI|CS
reset = 1;
sck = 3;
sdo = 4;
sdi = 2;
# vcc = 7; # Internally set independent of this setting
;
#------------------------------------------------------------
# stk500
#------------------------------------------------------------
# This is supposed to be the "default" STK500 entry.
# Attempts to select the correct firmware version
# by probing for it. Better use one of the entries
# below instead.
programmer # stk500
id = "stk500";
desc = "Atmel STK500 (probes STK500v2 first then STK500v1)";
type = "stk500generic";
prog_modes = PM_ISP;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ | HAS_FOSC_ADJ | HAS_VAREF_ADJ;
connection_type = serial;
;
#------------------------------------------------------------
# stk500v1
#------------------------------------------------------------
# The original STK500 protocol. Used by the Arduino as ISP
# programmer and various bootloaders.
# See AVR061 for details.
programmer # stk500v1
id = "stk500v1";
desc = "Atmel STK500 version 1.x firmware";
type = "stk500";
prog_modes = PM_ISP;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ | HAS_FOSC_ADJ | HAS_VAREF_ADJ;
connection_type = serial;
;
#------------------------------------------------------------
# arduino_as_isp
#------------------------------------------------------------
# Not to be confused with arduinoISP, this is the same as `-c stk500v1`
# but treats EEPROM r/w correctly for arduino_as_isp programmers
# See https://docs.arduino.cc/built-in-examples/arduino-isp/ArduinoISP/
# for details.
programmer # arduino_as_isp
id = "arduino_as_isp";
desc = "Arduino board as programmer using arduino as ISP firmware";
type = "stk500";
prog_modes = PM_ISP;
connection_type = serial;
baudrate = 19200;
;
#------------------------------------------------------------
# mib510
#------------------------------------------------------------
# The MIB510 is a serial gateway that can program AVRs over
# ISP or TPI using the stk500v1 protocol. See
# http://www.cmt-gmbh.de/Produkte/WirelessSensorNetworks/MIB510.html
# for details.
programmer # mib510
id = "mib510";
desc = "Crossbow MIB510 programming board";
type = "stk500";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# stk500v2
#------------------------------------------------------------
# Version 2 of the STK500 protocol. See AVR068 for details.
programmer # stk500v2
id = "stk500v2", "scratchmonkey";
desc = "Atmel STK500 version 2.x firmware";
type = "stk500v2";
prog_modes = PM_TPI | PM_ISP;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ | HAS_FOSC_ADJ | HAS_VAREF_ADJ;
connection_type = serial;
;
#------------------------------------------------------------
# stk500pp
#------------------------------------------------------------
programmer # stk500pp
id = "stk500pp", "scratchmonkey_pp";
desc = "Atmel STK500 v2 in parallel programming mode";
type = "stk500pp";
prog_modes = PM_HVPP;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ | HAS_FOSC_ADJ | HAS_VAREF_ADJ;
connection_type = serial;
;
#------------------------------------------------------------
# stk500hvsp
#------------------------------------------------------------
programmer # stk500hvsp
id = "stk500hvsp", "scratchmonkey_hvsp";
desc = "Atmel STK500 v2 in high-voltage serial programming mode";
type = "stk500hvsp";
prog_modes = PM_HVSP;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ | HAS_FOSC_ADJ | HAS_VAREF_ADJ;
connection_type = serial;
;
#------------------------------------------------------------
# stk600
#------------------------------------------------------------
# STK600 development board. See
# https://www.microchip.com/en-us/development-tool/atstk600
# and AVR079 for details.
programmer # stk600
id = "stk600";
desc = "Atmel STK600";
type = "stk600";
prog_modes = PM_TPI | PM_ISP | PM_PDI;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ | HAS_FOSC_ADJ | HAS_VAREF_ADJ;
connection_type = usb;
;
#------------------------------------------------------------
# stk600pp
#------------------------------------------------------------
programmer # stk600pp
id = "stk600pp";
desc = "Atmel STK600 in parallel programming mode";
type = "stk600pp";
prog_modes = PM_HVPP;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ | HAS_FOSC_ADJ | HAS_VAREF_ADJ;
connection_type = usb;
;
#------------------------------------------------------------
# stk600hvsp
#------------------------------------------------------------
programmer # stk600hvsp
id = "stk600hvsp";
desc = "Atmel STK600 in high-voltage serial programming mode";
type = "stk600hvsp";
prog_modes = PM_HVSP;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ | HAS_FOSC_ADJ | HAS_VAREF_ADJ;
connection_type = usb;
;
#------------------------------------------------------------
# avr910
#------------------------------------------------------------
# The AVR910 is a programmer implementation based on the
# AVR910 application note.
programmer # avr910
id = "avr910";
desc = "Atmel Low Cost Serial Programmer";
type = "avr910";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# ft245r
#------------------------------------------------------------
# Ftdi_syncbb-type programmers utilise FTDI chips for programming
# in a bit-banging mode. In contrast to avrftdi-type programmers,
# the pin mapping to the main ISP signals (reset, sck, sdo, sdi) is
# somewhat arbitrary and will be determined by the actual routing
# of the FTDI IC pins to the ISP header of the physical programmer.
programmer # ft245r
id = "ft245r";
desc = "FT245R based generic programmer";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 4; # D4
sck = 0; # D0
sdo = 2; # D2
sdi = 1; # D1
;
#------------------------------------------------------------
# ft232r
#------------------------------------------------------------
programmer # ft232r
id = "ft232r";
desc = "FT232R based generic programmer";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
is_serialadapter = yes;
connection_type = usb;
usbvid = 0x0403; # For use as serial adapter
usbpid = 0x6001; # "
reset = 4; # DTR
sck = 0; # TxD
sdo = 2; # RTS
sdi = 1; # RxD
;
#------------------------------------------------------------
# bwmega
#------------------------------------------------------------
# see http://www.bitwizard.nl/wiki/index.php/FTDI_ATmega
programmer # bwmega
id = "bwmega";
desc = "BitWizard ftdi_atmega builtin programmer";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 7; # RI
sck = 6; # DCD
sdo = 3; # CTS
sdi = 5; # DSR
;
#------------------------------------------------------------
# arduino-ft232r
#------------------------------------------------------------
# This programmer helps programming the Arduino Diecimila, NG and
# Duemilanove (but not the Uno) without bootloader or external
# programmer using the on-board FT232RL chip. Instructions here:
# https://make.kosakalab.com/arduino/bootloader/index_en.html
# Note that the -c diecimila avrdude.conf entry mentioned in above post
# is the same as the -c arduino-ft232r entry here.
programmer # arduino-ft232r
id = "arduino-ft232r", "diecimila";
desc = "Arduino: FT232R connected to ISP";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 7; # RI X3(4)
sck = 5; # DSR X3(2)
sdo = 6; # DCD X3(3)
sdi = 3; # CTS X3(1)
;
#------------------------------------------------------------
# tc2030
#------------------------------------------------------------
# See https://www.tag-connect.com/product-category/products/cables/ftdi
# for details.
programmer # tc2030
id = "tc2030";
desc = "Tag-Connect TC2030";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
# FOR TPI devices:
reset = 3; # CTS = D3 (wire to ~RESET)
sck = 2; # RTS = D2 (wire to SCK)
sdo = 0; # TxD = D0 (wire to TPIDATA via 1k resistor)
sdi = 1; # RxD = D1 (wire to TPIDATA directly)
;
#------------------------------------------------------------
# uncompatino
#------------------------------------------------------------
# There is a ATmega328P kit PCB called "uncompatino".
# This board allows ISP via its on-board FT232R.
# This is designed like Arduino Duemilanove but has no standard ICPS header.
# Its 4 pairs of pins are shorted to enable ftdi_syncbb.
# http://akizukidenshi.com/catalog/g/gP-07487/
# http://akizukidenshi.com/download/ds/akizuki/k6096_manual_20130816.pdf
programmer # uncompatino
id = "uncompatino";
desc = "uncompatino with all pairs of pins shorted";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 7; # ri
sck = 5; # dsr
sdo = 6; # dcd
sdi = 3; # cts
;
#------------------------------------------------------------
# ttl232r
#------------------------------------------------------------
# FTDI USB to serial cable TTL-232R-5V with a custom adapter for ICSP
# - https://ftdichip.com/product-category/products/cables/usb-ttl-serial-cable-series/
# - http://www.ftdichip.com/Support/Documents/DataSheets/Cables/DS_TTL-232R_CABLES.pdf
#
# For ICSP pinout see, e.g., http://ww1.microchip.com/downloads/en/DeviceDoc/doc2562.pdf
# (Figure 1. ISP6PIN header pinout and Table 1. Connections required for ISP ...)
# TTL-232R GND 1 Black -> ICPS GND (pin 6)
# TTL-232R CTS 2 Brown -> ICPS SDO (pin 4)
# TTL-232R VCC 3 Red -> ICPS VCC (pin 2)
# TTL-232R TXD 4 Orange -> ICPS RESET (pin 5)
# TTL-232R RXD 5 Yellow -> ICPS SCK (pin 3)
# TTL-232R RTS 6 Green -> ICPS SDI (pin 1)
#
# Except for VCC and GND, you can connect arbitrary pairs as long as the
# following table is adjusted.
programmer # ttl232r
id = "ttl232r";
desc = "FTDI TTL232R-5V with ICSP adapter";
type = "ftdi_syncbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
reset = 0; # txd
sck = 1; # rxd
sdo = 3; # cts
sdi = 2; # rts
;
#------------------------------------------------------------
# usbasp
#------------------------------------------------------------
# From http://www.fischl.de/usbasp
# USBasp is a USB in-circuit programmer for Atmel AVR controllers. It
# simply consists of an ATmega88 or an ATmega8 and a couple of passive
# components. The programmer uses a firmware-only USB driver, no
# special USB controller is needed.
#
# Firmware, schematics and drivers are available under above URL, too.
#
# Alternative firmware for the external programmer:
#
# - https://github.com/mariusgreuel/USBasp
# Windows OS descriptor to load WinUSB driver automatically
#
# - https://github.com/nerdralph/usbasp
# WCID compliant, meaning it should work on Windows without any
# driver or .inf install; default SCK clock of 1.5 MHz and automatic
# SCK slowing if target does not respond; PORTD is left as input, so
# this firmware also works with USBISP modules, eg,
# https://www.sciencetronics.com/greenphotons/?p=938
#
# - https://github.com/dioannidis/usbasp
# As above plus HID UART support, setting unique serial number and
# AT89S51/AT89S52 support
programmer # usbasp
id = "usbasp";
desc = "USBasp ISP and TPI programmer";
type = "usbasp";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x16c0; # VOTI
usbpid = 0x05dc; # Obdev's free shared PID
usbvendor = "www.fischl.de";
usbproduct = "USBasp";
# Old usbasp from fischl.de:
# usbvid = 0x03EB; # ATMEL
# usbpid = 0xC7B4; # (unoffical) USBasp
# usbvendor = "www.fischl.de";
# usbproduct = "USBasp";
;
#------------------------------------------------------------
# nibobee
#------------------------------------------------------------
# http://www.nicai-systems.com/en/nibobee
programmer # nibobee
id = "nibobee";
desc = "NIBObee";
type = "usbasp";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x16c0; # VOTI
usbpid = 0x092f; # NIBObee PID
usbvendor = "www.nicai-systems.com";
usbproduct = "NIBObee";
;
#------------------------------------------------------------
# usbasp-clone
#------------------------------------------------------------
programmer # usbasp-clone
id = "usbasp-clone";
desc = "Any usbasp clone with correct VID/PID";
type = "usbasp";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x16c0; # VOTI
usbpid = 0x05dc; # Obdev's free shared PID
;
#------------------------------------------------------------
# usbtiny
#------------------------------------------------------------
# https://learn.adafruit.com/usbtinyisp
#
# The ISP USBtiny programmer can also be used for TPI programming.
# In that case, a resistor of 1 kOhm is needed between SDI and SDO
# pins of the connector, and SDI (pin 1 of the 6-pin connector)
# connects to TPIDATA.
programmer # usbtiny
id = "usbtiny";
desc = "USBtiny simple USB programmer";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x1781;
usbpid = 0x0c9f;
;
#------------------------------------------------------------
# arduino_gemma
#------------------------------------------------------------
# https://github.com/arduino/ArduinoCore-avr/tree/master/bootloaders/gemma
programmer # arduino_gemma
id = "arduino_gemma";
desc = "Arduino Gemma bootloader disguised as USBtiny";
type = "usbtiny";
prog_modes = PM_SPM;
connection_type = usb;
usbvid = 0x2341;
usbpid = 0x0c9f;
;
#------------------------------------------------------------
# adafruit_gemma
#------------------------------------------------------------
# https://github.com/adafruit/Adafruit-Trinket-Gemma-Bootloader
programmer # adafruit_gemma
id = "adafruit_gemma";
desc = "Adafruit Trinket Gemma bootloader disguised as USBtiny";
type = "usbtiny";
prog_modes = PM_SPM;
connection_type = usb;
usbvid = 0x1781;
usbpid = 0x0c9f;
;
#------------------------------------------------------------
# arduinoisp
#------------------------------------------------------------
# Arduino LLC branded USBtiny programmer
# https://docs.arduino.cc/retired/boards/arduino-isp/
programmer # arduinoisp
id = "arduinoisp";
desc = "Arduino ISP Programmer";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x2341;
usbpid = 0x0049;
;
#------------------------------------------------------------
# arduinoisporg
#------------------------------------------------------------
# Identical to the Arduino LLC branded USBtiny programmer,
# but with a different USB VID.
programmer # arduinoisporg
id = "arduinoisporg";
desc = "Arduino ISP Programmer";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x2a03;
usbpid = 0x0049;
;
#------------------------------------------------------------
# ehajo-isp
#------------------------------------------------------------
# Commercial version of USBtiny using a separate VID/PID from
# http://www.eHaJo.de (closed from end of 2023)
programmer # ehajo-isp
id = "ehajo-isp";
desc = "AVR ISP programmer from eHaJo.de";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x16d0;
usbpid = 0x0ba5;
;
#------------------------------------------------------------
# iseavrprog
#------------------------------------------------------------
# Commercial version of USBtiny using a separate VID/PID from
# https://iascaled.com
#
# https://github.com/IowaScaledEngineering/ckt-avrprogrammer
programmer # iseavrprog
id = "iseavrprog";
desc = "AVR ISP programmer from iascaled.com";
type = "usbtiny";
prog_modes = PM_TPI | PM_ISP;
connection_type = usb;
usbvid = 0x1209;
usbpid = 0x6570;
;
#------------------------------------------------------------
# micronucleus
#------------------------------------------------------------
# Micronucleus is a bootloader designed for AVR ATtiny
# microcontrollers with a minimal usb interface and a
# strong emphasis on bootloader compactness. See
# https://github.com/micronucleus/micronucleus
# for details.
programmer # micronucleus
id = "micronucleus";
desc = "Micronucleus for bootloader";
type = "micronucleus";
prog_modes = PM_SPM;
connection_type = usb;
usbvid = 0x16d0;
usbpid = 0x0753;
;
#------------------------------------------------------------
# teensy
#------------------------------------------------------------
# Proprietary bootloader used on the AVR based PJRC Teensy boards.
# Can only write to memory, not read/verify.
# See https://www.pjrc.com/teensy/ for details.
programmer # teensy
id = "teensy";
desc = "Teensy for bootloader";
type = "teensy";
prog_modes = PM_SPM;
connection_type = usb;
usbvid = 0x16c0;
usbpid = 0x0478;
;
#------------------------------------------------------------
# ch341a
#------------------------------------------------------------
# Allows programming of AVR parts with F_CPU of min 6.8 MHz with the
# CH341A chip http://www.wch-ic.com/downloads/CH341DS1_PDF.html
#
# See also:
# https://www.onetransistor.eu/2017/08/ch341a-mini-programmer-schematic.html
#
# Connection scheme:
# CH341A chip -- AVR ISP Connector
# ~CTS/D0/CS0 -- RESET (can be D1 or D2, see reset setting below)
# ~DCD/D3/DCK -- SCK
# ~DTR/D5/DOUT -- SDO
# ~SLP/D7/DIN -- SDI
# GND -- GND
# 5V -- Vcc/Vin (or disconnect if separately powered)
programmer # ch341a
id = "ch341a";
desc = "ch341a programmer (AVR must have minimum F_CPU of 6.8 MHz)";
type = "ch341a";
prog_modes = PM_ISP;
is_serialadapter = yes;
connection_type = usb;
usbvid = 0x1a86;
usbpid = 0x5512;
usbvendor = "wch.cn";
usbproduct = "CH341A";
reset = 0; # Can be 0, 1 or 2 for CS0, CS1 or CS2
;
#------------------------------------------------------------
# butterfly
#------------------------------------------------------------
# Bootloader origininally designed around the AVR Butterfly
# development board. See
# https://www.microchip.com/en-us/development-tool/atavrbfly
# for details.
programmer # butterfly
id = "butterfly";
desc = "Atmel for bootloader (Butterfly Development Board)";
type = "butterfly";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# avr109
#------------------------------------------------------------
# AVR109 "Butterfly" bootloader.
# See the AVR109 and AVR911 application notes for details.
programmer # avr109
id = "avr109", "avr911";
desc = "Atmel for bootloader using AppNote AVR109/911";
type = "butterfly";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# butterfly_mk and mkbutterfly
#------------------------------------------------------------
# http://forum.mikrokopter.de
programmer # butterfly_mk
id = "butterfly_mk", "mkbutterfly";
desc = "Mikrokopter.de Butterfly for bootloader";
type = "butterfly_mk";
prog_modes = PM_SPM;
connection_type = serial;
;
#------------------------------------------------------------
# jtagmkI
#------------------------------------------------------------
# The original AVR JTAG ICE. It only supports a handful of
# chips (search for PM_JTAGmkI in this file), but can easily be
# DIY'ed. See doc2475, AVR060, and the following URLs for details:
# https://scienceprog.com/build-your-own-avr-jtagice-clone/
# https://www.olimex.com/Products/AVR/Programmers/AVR-JTAG-USB-A/
# https://www.electrodragon.com/product/avr-usb-jtag-ice-programmer/
programmer # jtagmkI
id = "jtagmkI", "jtag1";
desc = "Atmel JTAG ICE (mkI)";
type = "jtagmki";
prog_modes = PM_JTAGmkI;
extra_features = HAS_VTARG_READ;
connection_type = serial;
baudrate = 115200; # default is 115200
;
#------------------------------------------------------------
# jtag1slow
#------------------------------------------------------------
programmer parent "jtag1" # jtag1slow
id = "jtag1slow";
baudrate = 19200;
;
#------------------------------------------------------------
# jtagmkII
#------------------------------------------------------------
# The JTAG ICE mkII has both, serial and USB connectivity. As it is
# mostly used through USB these days (AVR Studio 5 only supporting it
# that way), we make connection_type = usb the default. Users are
# still free to use a serial port with the -P option. See AVR067 or
# https://www.microchip.com/en-us/development-tool/atjtagice2
# for details.
programmer # jtagmkII
id = "jtagmkII";
desc = "Atmel JTAG ICE mkII";
type = "jtagmkii";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 19200; # default is 19200
;
#------------------------------------------------------------
# jtag2slow
#------------------------------------------------------------
programmer parent "jtagmkII" # jtag2slow
id = "jtag2slow";
;
#------------------------------------------------------------
# jtag2fast
#------------------------------------------------------------
# JTAG ICE mkII @ 115200 Bd (and alias jtag2 the fast version)
programmer parent "jtag2slow" # jtag2fast
id = "jtag2fast", "jtag2";
baudrate = 115200;
;
#------------------------------------------------------------
# jtag2isp
#------------------------------------------------------------
# JTAG ICE mkII in ISP mode
programmer # jtag2isp
id = "jtag2isp";
desc = "Atmel JTAG ICE mkII in ISP mode";
type = "jtagmkii_isp";
prog_modes = PM_TPI | PM_ISP;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtag2dw
#------------------------------------------------------------
# JTAG ICE mkII in debugWIRE mode
programmer # jtag2dw
id = "jtag2dw";
desc = "Atmel JTAG ICE mkII in debugWIRE mode";
type = "jtagmkii_dw";
prog_modes = PM_debugWIRE;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtagmkII_avr32
#------------------------------------------------------------
# JTAG ICE mkII in AVR32 mode
programmer # jtagmkII_avr32
id = "jtagmkII_avr32", "jtag2avr32";
desc = "Atmel JTAG ICE mkII in AVR32 mode";
type = "jtagmkii_avr32";
prog_modes = PM_aWire;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtag2pdi
#------------------------------------------------------------
# JTAG ICE mkII in PDI mode
programmer # jtag2pdi
id = "jtag2pdi";
desc = "Atmel JTAG ICE mkII in PDI mode";
type = "jtagmkii_pdi";
prog_modes = PM_PDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_jtag
#------------------------------------------------------------
# AVR Dragon in JTAG mode. See
# https://www.microchip.com/en-us/development-tool/atavrdragon
# for details.
programmer # dragon_jtag
id = "dragon_jtag";
desc = "Atmel AVR Dragon in JTAG mode";
type = "dragon_jtag";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_isp
#------------------------------------------------------------
# AVR Dragon in ISP mode
programmer # dragon_isp
id = "dragon_isp";
desc = "Atmel AVR Dragon in ISP mode";
type = "dragon_isp";
prog_modes = PM_TPI | PM_ISP;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_pp
#------------------------------------------------------------
# AVR Dragon in PP mode
programmer # dragon_pp
id = "dragon_pp";
desc = "Atmel AVR Dragon in PP mode";
type = "dragon_pp";
prog_modes = PM_HVPP;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_hvsp
#------------------------------------------------------------
# AVR Dragon in HVSP mode
programmer # dragon_hvsp
id = "dragon_hvsp";
desc = "Atmel AVR Dragon in HVSP mode";
type = "dragon_hvsp";
prog_modes = PM_HVSP;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_dw
#------------------------------------------------------------
# AVR Dragon in debugWIRE mode
programmer # dragon_dw
id = "dragon_dw";
desc = "Atmel AVR Dragon in debugWIRE mode";
type = "dragon_dw";
prog_modes = PM_debugWIRE;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# dragon_pdi
#------------------------------------------------------------
# AVR Dragon in PDI mode
programmer # dragon_pdi
id = "dragon_pdi";
desc = "Atmel AVR Dragon in PDI mode";
type = "dragon_pdi";
prog_modes = PM_PDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
baudrate = 115200;
;
#------------------------------------------------------------
# jtag3
#------------------------------------------------------------
# Atmel JTAGICE3 programmer. See
# https://www.microchip.com/en-us/development-tool/atjtagice3
# for details.
#
# The JTAGICE3 supports the following programming modes
# using different programmer names:
#
# Interface: Programmer name:
# JTAG jtag3
# PDI jtag3pdi
# UPDI jtag3updi
# debugWIRE jtag3dw
# ISP jtag3isp
programmer # jtag3
id = "jtag3";
desc = "Atmel AVR JTAGICE3 in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
#------------------------------------------------------------
# jtag3pdi
#------------------------------------------------------------
programmer # jtag3pdi
id = "jtag3pdi";
desc = "Atmel AVR JTAGICE3 in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
#------------------------------------------------------------
# jtag3updi
#------------------------------------------------------------
programmer # jtag3updi
id = "jtag3updi";
desc = "Atmel AVR JTAGICE3 in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2110, 0x2140;
hvupdi_support = 1;
;
#------------------------------------------------------------
# jtag3dw
#------------------------------------------------------------
programmer # jtag3dw
id = "jtag3dw";
desc = "Atmel AVR JTAGICE3 in debugWIRE mode";
type = "jtagice3_dw";
prog_modes = PM_debugWIRE;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
#------------------------------------------------------------
# jtag3isp
#------------------------------------------------------------
programmer # jtag3isp
id = "jtag3isp";
desc = "Atmel AVR JTAGICE3 in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2110, 0x2140;
;
#------------------------------------------------------------
# xplainedpro / xplainedpro_jtag
#------------------------------------------------------------
# On-board EDBG based programmer found on various AVR based
# Microchip Xplained Pro boards
# Different Xplained Pro boards uses different programming
# interfaces. These are the ones available:
#
# Interface: Programmer name:
# JTAG xplainedpro, xplainedpro_jtag
# PDI xplainedpro_pdi
# UPDI xplainedpro_updi
programmer # xplainedpro
id = "xplainedpro", "xplainedpro_jtag";
desc = "Atmel AVR XplainedPro in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2111;
;
#------------------------------------------------------------
# xplainedpro_pdi
#------------------------------------------------------------
programmer # xplainedpro_pdi
id = "xplainedpro_pdi";
desc = "Atmel AVR XplainedPro in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2111;
hvupdi_support = 1;
;
#------------------------------------------------------------
# xplainedpro_updi
#------------------------------------------------------------
programmer # xplainedpro_updi
id = "xplainedpro_updi";
desc = "Atmel AVR XplainedPro in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2111;
hvupdi_support = 1;
;
#------------------------------------------------------------
# xplainedmini / xplainedmini_isp
#------------------------------------------------------------
# On-board mEDBG based programmer found on AVR based
# Microchip Xplained Mini/Nano boards
#
# Different Xplained Mini/Nano boards uses different
# programming interfaces. These are the ones available:
#
# Interface: Programmer name:
# ISP xplainedmini, xplainedmini_isp
# debugWIRE xplainedmini_dw
# UPDI xplainedmini_updi
# TPI xplainedmini_tpi
#
# Some Xplained Mini boards has a programmable target voltage
# switch that can be controlled using the -xvtarg_switch flag.
# By modifying the SUFFER register using the -xsuffer flag,
# certain programmer safety features can be enabled or disabled.
programmer # xplainedmini
id = "xplainedmini", "xplainedmini_isp";
desc = "Atmel AVR XplainedMini in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
extra_features = HAS_SUFFER | HAS_VTARG_SWITCH;
connection_type = usb;
usbpid = 0x2145;
;
#------------------------------------------------------------
# xplainedmini_dw
#------------------------------------------------------------
# The Xplained Mini debugWIRE interface may be finicky,
# and usually require the mEDBG chip to drive the XTAL1
# pin on the target to keep the debugWIRE interface
# in sync
programmer # xplainedmini_dw
id = "xplainedmini_dw";
desc = "Atmel AVR XplainedMini in debugWIRE mode";
type = "jtagice3_dw";
prog_modes = PM_debugWIRE;
extra_features = HAS_SUFFER | HAS_VTARG_SWITCH;
connection_type = usb;
usbpid = 0x2145;
;
#------------------------------------------------------------
# xplainedmini_updi
#------------------------------------------------------------
# Note that the on-board programmer only support the
# megaAVR-0 and tinyAVR-0/1/2 chip families.
programmer # xplainedmini_updi
id = "xplainedmini_updi";
desc = "Atmel AVR XplainedMini in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
extra_features = HAS_SUFFER | HAS_VTARG_SWITCH;
connection_type = usb;
usbpid = 0x2145;
hvupdi_support = 1;
;
#------------------------------------------------------------
# xplainedmini_tpi
#------------------------------------------------------------
programmer # xplainedmini_tpi
id = "xplainedmini_tpi";
desc = "Atmel AVR XplainedMini in TPI mode";
type = "jtagice3_tpi";
prog_modes = PM_TPI;
connection_type = usb;
usbpid = 0x2145;
;
#------------------------------------------------------------
# atmelice / atmelice_jtag
#------------------------------------------------------------
# Atmel-ICE programmer. See
# https://www.microchip.com/en-us/development-tool/atatmel-ice
# for details.
#
# The Atmel-ICE supports the following programming modes
# using different programmer names:
#
# Interface: Programmer name:
# JTAG atmelice, atmelice_jtag
# PDI atmelice_pdi
# UPDI atmelice_updi
# debugWIRE atmelice_dw
# ISP atmelice_isp
programmer # atmelice
id = "atmelice", "atmelice_jtag";
desc = "Atmel-ICE (ARM/AVR) in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# atmelice_pdi
#------------------------------------------------------------
programmer # atmelice_pdi
id = "atmelice_pdi";
desc = "Atmel-ICE (ARM/AVR) in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# atmelice_updi
#------------------------------------------------------------
programmer # atmelice_updi
id = "atmelice_updi";
desc = "Atmel-ICE (ARM/AVR) in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2141;
hvupdi_support = 1;
;
#------------------------------------------------------------
# atmelice_dw
#------------------------------------------------------------
programmer # atmelice_dw
id = "atmelice_dw";
desc = "Atmel-ICE (ARM/AVR) in debugWIRE mode";
type = "jtagice3_dw";
prog_modes = PM_debugWIRE;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# atmelice_isp
#------------------------------------------------------------
programmer # atmelice_isp
id = "atmelice_isp";
desc = "Atmel-ICE (ARM/AVR) in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# atmelice_tpi
#------------------------------------------------------------
programmer # atmelice_tpi
id = "atmelice_tpi";
desc = "Atmel-ICE (ARM/AVR) in TPI mode";
type = "jtagice3_tpi";
prog_modes = PM_TPI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2141;
;
#------------------------------------------------------------
# powerdebugger / powerdebugger_jtag
#------------------------------------------------------------
# Microchip Power Debugger. See
# https://www.microchip.com/en-us/development-tool/atpowerdebugger
# for details.
#
# The Power Debugger supports the following programming modes
# using different programmer names:
#
# Interface: Programmer name:
# JTAG powerdebugger, powerdebugger_jtag
# PDI powerdebugger_pdi
# UPDI powerdebugger_updi
# debugWIRE powerdebugger_dw
# ISP powerdebugger_isp
#
# The Power Debugger has a programmable voltage source and
# can read the target voltage of the connected device.
# It also has two independent current measurement channels.
# All this can be utilized using the Avrdude terminal mode.
programmer # powerdebugger
id = "powerdebugger", "powerdebugger_jtag";
desc = "Atmel PowerDebugger (ARM/AVR) in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG | PM_AVR32JTAG;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# powerdebugger_pdi
#------------------------------------------------------------
programmer # powerdebugger_pdi
id = "powerdebugger_pdi";
desc = "Atmel PowerDebugger (ARM/AVR) in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# powerdebugger_updi
#------------------------------------------------------------
programmer # powerdebugger_updi
id = "powerdebugger_updi";
desc = "Atmel PowerDebugger (ARM/AVR) in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2144;
hvupdi_support = 0, 1;
;
#------------------------------------------------------------
# powerdebugger_dw
#------------------------------------------------------------
programmer # powerdebugger_dw
id = "powerdebugger_dw";
desc = "Atmel PowerDebugger (ARM/AVR) in debugWire mode";
type = "jtagice3_dw";
prog_modes = PM_debugWIRE;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# powerdebugger_isp
#------------------------------------------------------------
programmer # powerdebugger_isp
id = "powerdebugger_isp";
desc = "Atmel PowerDebugger (ARM/AVR) in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# powerdebugger_tpi
#------------------------------------------------------------
programmer # powerdebugger_tpi
id = "powerdebugger_tpi";
desc = "Atmel PowerDebugger (ARM/AVR) in TPI mode";
type = "jtagice3_tpi";
prog_modes = PM_TPI;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2144;
;
#------------------------------------------------------------
# pickit4 / pickit4_jtag
#------------------------------------------------------------
# Microchip PICkit 4. See
# https://www.microchip.com/en-us/development-tool/pg164140
# for details.
#
# The PICkit 4 supports the following programming modes
# using different programmer names:
#
# Interface: Programmer name:
# JTAG pickit4, pickit4_jtag
# PDI pickit4_pdi
# UPDI pickit4_updi
# debugWIRE pickit4_dw
# ISP pickit4_isp
#
# The pinout is identical to the MPLAB SNAP, but different
# from other Microchip branded AVR programmers, and would
# usually require an adapter or custom wiring if your target
# board has a standard 6 or 10-pin programming connector.
#
# PIN JTAG PDI UPDI DW ISP UART*
# > 1
# 2 VCC VCC VCC VCC VCC VCC
# 3 GND GND GND GND GND GND
# 4 TDO DATA UPDI SDI
# 5 TCK SCK
# 6 RST SCK dW RST
# 7 TDI SDI TX (target)
# 8 TMS RX (target)
#
# * The PICkit4 can also be used as a USB to UART
# interface for simple serial debugging.
programmer # pickit4
id = "pickit4", "pickit4_jtag";
desc = "MPLAB(R) PICkit 4 in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2177, 0x2178, 0x2179;
;
#------------------------------------------------------------
# pickit4_updi
#------------------------------------------------------------
programmer # pickit4_updi
id = "pickit4_updi";
desc = "MPLAB(R) PICkit 4 in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2177, 0x2178, 0x2179;
hvupdi_support = 0, 1, 2;
;
#------------------------------------------------------------
# pickit4_pdi
#------------------------------------------------------------
programmer # pickit4_pdi
id = "pickit4_pdi";
desc = "MPLAB(R) PICkit 4 in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2177, 0x2178, 0x2179;
;
#------------------------------------------------------------
# pickit4_isp
#------------------------------------------------------------
# Due to hardware limitations, the PICkit 4 can only
# reach an ISP clock speed of about 330 kHz
programmer # pickit4_isp
id = "pickit4_isp";
desc = "MPLAB(R) PICkit 4 in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2177, 0x2178, 0x2179;
;
#------------------------------------------------------------
# pickit4_tpi
#------------------------------------------------------------
programmer # pickit4_tpi
id = "pickit4_tpi";
desc = "MPLAB(R) PICkit 4 in TPI mode";
type = "jtagice3_tpi";
prog_modes = PM_TPI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2177, 0x2178, 0x2179;
;
#------------------------------------------------------------
# snap /snap_jtag
#------------------------------------------------------------
# Microchip MPLAB SNAP. See
# https://www.microchip.com/en-us/development-tool/pg164100
# for details.
#
# The MPLAB SNAP supports the following programming modes
# using different programmer names:
#
# Interface: Programmer name:
# JTAG snap, snap_jtag
# PDI snap_pdi
# UPDI snap_updi
# debugWIRE snap_dw
# ISP snap_isp
#
# The pinout is identical to the PICkit 4, but different
# from other Microchip branded AVR programmers, and would
# usually require an adapter or custom wiring if your target
# board has a standard 6 or 10-pin programming connector.
#
# PIN JTAG PDI UPDI DW ISP UART*
# > 1
# 2 VCC VCC VCC VCC VCC VCC
# 3 GND GND GND GND GND GND
# 4 TDO DATA UPDI SDI
# 5 TCK SCK
# 6 RST SCK dW RST
# 7 TDI SDI TX (target)
# 8 TMS RX (target)
#
# * The MPLAB SNAP can also be used as a USB to UART
# interface for simple serial debugging.
programmer # snap
id = "snap", "snap_jtag";
desc = "MPLAB(R) SNAP in JTAG mode";
type = "jtagice3";
prog_modes = PM_JTAG | PM_XMEGAJTAG;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2180, 0x217f, 0x2181;
;
#------------------------------------------------------------
# snap_updi
#------------------------------------------------------------
# Note that certain MPLAB SNAP programmer needs a hardware
# modification to be used as a UPDI programmer.
# See the Microchip ETN #36 for details.
programmer # snap_updi
id = "snap_updi";
desc = "MPLAB(R) SNAP in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2180, 0x217f, 0x2181;
hvupdi_support = 1;
;
#------------------------------------------------------------
# snap_pdi
#------------------------------------------------------------
programmer # snap_pdi
id = "snap_pdi";
desc = "MPLAB(R) SNAP in PDI mode";
type = "jtagice3_pdi";
prog_modes = PM_PDI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2180, 0x217f, 0x2181;
;
#------------------------------------------------------------
# snap_isp
#------------------------------------------------------------
# Due to hardware limitations, the MPLAB SNAP can only
# reach an ISP clock speed of about 330 kHz
programmer # snap_isp
id = "snap_isp";
desc = "MPLAB(R) SNAP in ISP mode";
type = "jtagice3_isp";
prog_modes = PM_ISP;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2180, 0x217f, 0x2181;
;
#------------------------------------------------------------
# snap_tpi
#------------------------------------------------------------
programmer # snap_tpi
id = "snap_tpi";
desc = "MPLAB(R) SNAP in TPI mode";
type = "jtagice3_tpi";
prog_modes = PM_TPI;
extra_features = HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2180, 0x217f, 0x2181;
;
#------------------------------------------------------------
# pkobn_updi
#------------------------------------------------------------
# Microchip PICkit On-Board Nano is the name of the nEDBG
# based programmer/debugger that's found on AVR based
# Curiosity Nano boards.
#
# These boards can read and adjust the target voltage supply
# and can be done in the Avrdude terminal mode.
programmer # pkobn_updi
id = "pkobn_updi";
desc = "Curiosity nano (nEDBG) in UPDI mode";
type = "jtagice3_updi";
prog_modes = PM_UPDI;
extra_features = HAS_VTARG_ADJ | HAS_VTARG_READ;
connection_type = usb;
usbpid = 0x2175;
hvupdi_support = 1;
;
#------------------------------------------------------------
# pavr
#------------------------------------------------------------
# AVR910 based programmer. See
# https://web.archive.org/web/20040803005703/http://avr1.org/pavr/pavr.html
# for details.
programmer # pavr
id = "pavr";
desc = "Jason Kyle's pAVR Serial Programmer";
type = "avr910";
prog_modes = PM_ISP;
connection_type = serial;
;
#------------------------------------------------------------
# flip1
#------------------------------------------------------------
# The Atmel "Flexible in-system programmer" (FLIP v1) is a
# USB DFU bootloader designed for 8-bit AVRs with a native
# USB interface.
# See doc7618 for more information.
programmer # flip1
id = "flip1";
desc = "FLIP for bootloader using USB DFU protocol version 1 (doc7618)";
type = "flip1";
prog_modes = PM_SPM;
connection_type = usb;
;
#------------------------------------------------------------
# flip2
#------------------------------------------------------------
# The Atmel "Flexible in-system programmer" (FLIP v2) is a
# USB DFU bootloader designed for AVR XMEGA and AVR32.
# See AVR4023 for more information.
programmer # flip2
id = "flip2";
desc = "FLIP for bootloader using USB DFU protocol version 2 (AVR4023)";
type = "flip2";
prog_modes = PM_SPM;
connection_type = usb;
;
#------------------------------------------------------------
# ponyser
#------------------------------------------------------------
# some ultra cheap programmers use bitbanging on the serialport
#
# PC - DB9 - Pins for RS232:
#
# GND 5 -- |O
# | O| <- 9 RI
# DTR 4 <- |O |
# | O| <- 8 CTS
# TXD 3 <- |O |
# | O| -> 7 RTS
# RXD 2 -> |O |
# | O| <- 6 DSR
# DCD 1 -> |O
#
# Using RXD is currently not supported.
# Using RI is not supported under Win32 but is supported under Posix.
# serial ponyprog design (dasa2 in uisp)
# reset=!txd sck=rts sdo=dtr sdi=cts
programmer # ponyser
id = "ponyser";
desc = "design ponyprog serial, reset=!txd sck=rts sdo=dtr sdi=cts";
type = "serbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
reset = ~3;
sck = 7;
sdo = 4;
sdi = 8;
;
#------------------------------------------------------------
# siprog
#------------------------------------------------------------
# Serial port adapter http://www.lancos.com/siprogsch.html
# Same as above, different name
programmer parent "ponyser" # siprog
id = "siprog";
desc = "Lancos SI-Prog (same as ponyser)";
;
#------------------------------------------------------------
# dasa
#------------------------------------------------------------
# unknown (dasa in uisp)
# reset=rts sck=dtr sdo=txd sdi=cts
programmer # dasa
id = "dasa";
desc = "serial port banging, reset=rts sck=dtr sdo=txd sdi=cts";
type = "serbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
reset = 7;
sck = 4;
sdo = 3;
sdi = 8;
;
#------------------------------------------------------------
# dasa3
#------------------------------------------------------------
# unknown (dasa3 in uisp)
# reset=!dtr sck=rts sdo=txd sdi=cts
programmer # dasa3
id = "dasa3";
desc = "serial port banging, reset=!dtr sck=rts sdo=txd sdi=cts";
type = "serbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
reset = ~4;
sck = 7;
sdo = 3;
sdi = 8;
;
#------------------------------------------------------------
# C2N232i
#------------------------------------------------------------
# C2N232i (jumper configuration "auto")
# reset=dtr sck=!rts sdo=!txd sdi=!cts
programmer # c2n232i
id = "c2n232i";
desc = "serial port banging, reset=dtr sck=!rts sdo=!txd sdi=!cts";
type = "serbb";
prog_modes = PM_TPI | PM_ISP;
connection_type = serial;
reset = 4;
sck = ~7;
sdo = ~3;
sdi = ~8;
;
#------------------------------------------------------------
# jtag2updi
#------------------------------------------------------------
# https://github.com/ElTangas/jtag2updi
# Original source for the jtag2updi project
#
# https://github.com/askn37/jtag2updi
# Enhanced firmware with better device support
#
# https://github.com/arduino/ArduinoCore-megaavr/tree/master/firmwares/MuxTO
# Arduino Nano Every (jtag2updi with 1200 baud touch, -r)
programmer # jtag2updi
id = "jtag2updi", "nanoevery";
desc = "JTAGv2 to UPDI bridge";
type = "jtagmkii_updi";
prog_modes = PM_UPDI;
connection_type = serial;
baudrate = 115200;
hvupdi_support = 1;
;
#
# SERIAL ADAPTER DEFINITIONS
#
# A serialadapter is a programmer that has only USB parameters defined; it
# can be used for a -P <serialadapter>[:<serial number>] port
# specification instead of the created serial port. Per-user serialadapter
# definitions in ~/.avrduderc or avrdude.rc files can add a serial number
# to assign a particular board a specific id and default upload baud rate:
#
# serialadapter parent "ft232r"
# id = "bike-shed-door";
# usbsn = "0123456789";
# baudrate = 250000;
# ;
#
# This is particularly useful for uploading to a bootloader as it allows
# specifying the port as -P bike-shed-door rather than having to figure
# out which serial port name the operating system has assigned to the
# plugged in bike-shed-door board at runtime. Note that each programmer
# that defines usbpid and sets is_serialadapter = yes can also be utilised
# as a serialadapter.
#------------------------------------------------------------
# ch340
#------------------------------------------------------------
serialadapter # ch340
id = "ch340";
desc = "WCH CH340 USB to serial adapter";
usbvid = 0x1a86;
usbpid = 0x7523;
;
#------------------------------------------------------------
# ch343
#------------------------------------------------------------
# CH343 doc https://www.wch-ic.com/downloads/CH343DS1_PDF.html
serialadapter # ch343
id = "ch343";
desc = "WCH CH343 USB to serial adapter";
usbvid = 0x1a86;
usbpid = 0x55d3;
;
#------------------------------------------------------------
# ch9102
#------------------------------------------------------------
serialadapter # ch9102
id = "ch9102";
desc = "WCH CH9102 USB to serial adapter";
usbvid = 0x1a86;
usbpid = 0x55d4;
;
#------------------------------------------------------------
# cp210x
#------------------------------------------------------------
serialadapter # cp210x
id = "cp210x";
desc = "Silabs CP210x USB to serial adapter";
usbvid = 0x10c4;
usbpid = 0xea60, 0xea70, 0xea71;
;
#------------------------------------------------------------
# ft231x / ft234x / ft230x
#------------------------------------------------------------
serialadapter # ft231x
id = "ft231x", "ft234x", "ft230x";
desc = "FTDI FT23X series USB to serial adapter";
usbvid = 0x0403;
usbpid = 0x6015;
;
#------------------------------------------------------------
# pl2303
#------------------------------------------------------------
serialadapter # pl2303
id = "pl2303";
desc = "Profilic PL2303 USB to serial adapter";
usbvid = 0x067b;
usbpid = 0x2303, 0x2304, 0x23a3, 0x23b3, 0x23c3, 0x23d3, 0x23e3, 0x23f3;
;
#
# PART DEFINITIONS
#
#------------------------------------------------------------
# ATtiny11
#------------------------------------------------------------
# This is an HVSP-only device.
part # t11
desc = "ATtiny11";
id = "t11";
variants =
"ATtiny11: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny11-6PC: DIP8, Fmax=6 MHz, T=[0 C, 70 C], Vcc=[4 V, 5.5 V]",
"ATtiny11-6PI: DIP8, Fmax=6 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATtiny11-6PU: DIP8, Fmax=6 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATtiny11-6SC: SOIC8, Fmax=6 MHz, T=[0 C, 70 C], Vcc=[4 V, 5.5 V]",
"ATtiny11-6SI: SOIC8, Fmax=6 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATtiny11-6SU: SOIC8, Fmax=6 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATtiny11L-2PC: DIP8, Fmax=2 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny11L-2PI: DIP8, Fmax=2 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny11L-2SC: SOIC8, Fmax=2 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny11L-2SI: SOIC8, Fmax=2 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny11L-2SU: SOIC8, Fmax=2 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_HVSP;
mcuid = 8;
n_interrupts = 5;
stk500_devcode = 0x11;
chip_erase_delay = 20000;
signature = 0x1e 0x90 0x04;
serial = no;
timeout = 200;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
factory_fcpu = 1200000;
memory "eeprom"
size = 64;
delay = 5;
blocksize = 64;
readsize = 256;
;
memory "flash"
size = 1024;
delay = 3;
blocksize = 128;
readsize = 256;
;
memory "fuse"
size = 1;
initval = 0xf4;
bitmask = 0x1f;
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
;
memory "signature"
size = 3;
;
memory "calibration"
size = 1;
;
memory "io"
size = 64;
;
memory "sram"
size = 32;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny12
#------------------------------------------------------------
part # t12
desc = "ATtiny12";
id = "t12";
variants =
"ATtiny12: N/A, Fmax=8 MHz, T=[N/A, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny12-8PU: PDIP8, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATtiny12-8SU: SOIC8, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATtiny12L-4PU: PDIP8, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny12L-4SU: SOIC8, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny12L-4SUR: SOIC8, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny12V-1SU: SOIC8, Fmax=1.2 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny12V-1SUR: SOIC8, Fmax=1.2 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_ISP | PM_HVSP;
mcuid = 9;
n_interrupts = 6;
stk500_devcode = 0x12;
avr910_devcode = 0x55;
chip_erase_delay = 20000;
signature = 0x1e 0x90 0x05;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
factory_fcpu = 1200000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xxaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
;
memory "flash"
size = 1024;
min_write_delay = 4500;
max_write_delay = 20000;
readback = 0xff 0x00;
mode = 0x04;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
initval = 0x52;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--oooo.oooo";
write = "1010.1100--101x.xxxx--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
;
memory "sram"
size = 32;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny13
#------------------------------------------------------------
part # t13
desc = "ATtiny13";
id = "t13";
variants =
"ATtiny13: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[N/A, N/A]",
"ATtiny13-20MMU: MLF10, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20MMUR: VDFN10, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20MUR: WQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20PU: PDIP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20SQ: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20SQR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20SSQ: SOIC8N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20SSQR: SOIC8, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20SSU: SOIC8N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20SSUR: SOIC8N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20SU: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13-20SUR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny13V-10MMU: MLF10, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10MMUR: VDFN10, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10MU: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10MUR: WQFN20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10PQ: PDIP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10PU: PDIP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10SSU: SOIC8N, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10SSUR: SOIC8N, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10SU: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13V-10SUR: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 10;
n_interrupts = 10;
stk500_devcode = 0x14;
chip_erase_delay = 4000;
signature = 0x1e 0x90 0x07;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
flash_instr = 0xb4, 0x0e, 0x1e;
eeprom_instr =
0xbb, 0xfe, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x0e, 0xb4, 0x0e, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
idr = 0x2e;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 0;
factory_fcpu = 1200000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4000;
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xxaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xxaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 1024;
page_size = 32;
num_pages = 32;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.000a--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.000a--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--0000.000a--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x6a;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xff;
bitmask = 0x1f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 64;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny13A
#------------------------------------------------------------
part parent "t13" # t13a
desc = "ATtiny13A";
id = "t13a";
variants =
"ATtiny13A-MMF: VDFN10, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-MMFR: VDFN10, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-MMU: MLF10, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-MMUR: MLF10, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-MU: MLF20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-MUR: WQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-PU: PDIP8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SF: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SFR: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SH: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SN: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SNR: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SS7: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SS7R: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SSH: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SSHR: SOIC8N, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SSU: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SSUR: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SU: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny13A-SUR: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 11;
;
#------------------------------------------------------------
# ATtiny15
#------------------------------------------------------------
part # t15
desc = "ATtiny15";
id = "t15";
variants =
"ATtiny15: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny15L-1PC: DIP8, Fmax=1.6 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny15L-1PI: DIP8, Fmax=1.6 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny15L-1PU: DIP8, Fmax=1.6 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny15L-1SC: SOIC8, Fmax=1.6 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny15L-1SI: SOIC8, Fmax=1.6 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny15L-1SU: SOIC8, Fmax=1.6 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_ISP | PM_HVSP;
mcuid = 12;
n_interrupts = 9;
stk500_devcode = 0x13;
avr910_devcode = 0x56;
chip_erase_delay = 8200;
signature = 0x1e 0x90 0x06;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
latchcycles = 16;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
hvspcmdexedelay = 5;
factory_fcpu = 1600000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
min_write_delay = 8200;
max_write_delay = 8200;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xxaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
;
memory "flash"
size = 1024;
min_write_delay = 4100;
max_write_delay = 4100;
readback = 0xff 0x00;
mode = 0x04;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
initval = 0x5c;
bitmask = 0xf3;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--oooo.xxoo";
write = "1010.1100--101x.xxxx--xxxx.xxxx--iiii.11ii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
;
memory "sram"
size = 32;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT89S51
#------------------------------------------------------------
# Nonstandard part
# - Tested with -c avrisp
# - USBASP programmers may require different firmware
part # 89S51
desc = "AT89S51";
id = "89S51";
variants =
"AT89S51: N/A, Fmax=33 MHz, T=[N/A, N/A], Vcc=[4 V, 5.5 V]",
"AT89S51-24AU: TQFP44, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"AT89S51-24JU: PLCC44, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"AT89S51-24PU: PDIP40, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]";
prog_modes = PM_ISP | PM_HVPP;
mcuid = 372;
stk500_devcode = 0xe0;
chip_erase_delay = 250000;
signature = 0x1e 0x51 0x06;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 4;
pollvalue = 0x69;
predelay = 1;
postdelay = 1;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "flash"
size = 4096;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 0x02;
delay = 10;
blocksize = 256;
read = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
write = "0100.0000--xxxa.aaaa--aaaa.aaaa--iiii.iiii";
# Nonstandard page mode is available but not implemented
;
memory "lock"
size = 1;
read = "0010.0100--xxxx.xxxx--xxxx.xxxx--xxxo.ooxx";
# Nonstandard write: expect verification errors
# See datasheet Page 20, Note 1 https://ww1.microchip.com/downloads/en/DeviceDoc/doc2487.pdf
# Activate lock mode 0 through chip erase: avrdude -e
# Activate lock mode 1: avrdude -e -V -U lock:w:1:m
# Activate lock mode 2: avrdude -e -V -U lock:w:1:m -U lock:w:2:m
# Activate lock mode 3: avrdude -e -V -U lock:w:1:m -U lock:w:2:m -U lock:w:3:m
write = "1010.1100--1110.00ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0 0 1 0 1 0 0 0 x x x x x x a1 a0 x x x x x x x 0 o o o o o o o o";
;
;
#------------------------------------------------------------
# AT89S52
#------------------------------------------------------------
part parent "89S51" # 89S52
desc = "AT89S52";
id = "89S52";
variants =
"AT89S52: N/A, Fmax=33 MHz, T=[N/A, N/A], Vcc=[4 V, 5.5 V]",
"AT89S52-24AU: TQFP44, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"AT89S52-24AUR: TQFP44, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"AT89S52-24JU: PLCC44, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"AT89S52-24PU: PDIP40, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]";
mcuid = 373;
stk500_devcode = 0xe1;
signature = 0x1e 0x52 0x06;
memory "flash"
size = 8192;
;
;
#------------------------------------------------------------
# AT90S1200
#------------------------------------------------------------
part # 1200
desc = "AT90S1200";
id = "1200";
variants =
"AT90S1200-12PC: DIP20, Fmax=12 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S1200-12PI: DIP20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S1200-12SC: SOIC20, Fmax=12 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S1200-12SI: SOIC20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S1200-12YC: SSOP20, Fmax=12 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S1200-12YI: SSOP20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S1200-4PC: DIP20, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S1200-4PI: DIP20, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S1200-4SC: SOIC20, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S1200-4SI: SOIC20, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S1200-4YC: SSOP20, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S1200-4YI: SSOP20, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S1200A-12PC: DIP20, Fmax=12 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S1200A-12PI: DIP20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S1200A-12SC: SOIC20, Fmax=12 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S1200A-12SI: SOIC20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S1200A-12YC: SSOP20, Fmax=12 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S1200A-12YI: SSOP20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S1200A-4PC: DIP20, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S1200A-4PI: DIP20, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S1200A-4SC: SOIC20, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S1200A-4SI: SOIC20, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S1200A-4YC: SSOP20, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S1200A-4YI: SSOP20, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 183;
n_interrupts = 4;
stk500_devcode = 0x33;
avr910_devcode = 0x13;
chip_erase_delay = 20000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x90 0x01;
is_at90s1200 = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 1;
pollvalue = 0xff;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x00 0xff;
mode = 0x04;
delay = 20;
blocksize = 32;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xxaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
;
memory "flash"
size = 1024;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x02;
delay = 15;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
initval = 0xdf;
bitmask = 0x21;
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 20000;
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 32;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT90S4414
#------------------------------------------------------------
part # 4414
desc = "AT90S4414";
id = "4414";
variants =
"AT90S4414-4AC: TQFP44, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S4414-4AI: TQFP44, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S4414-4JC: LCC44, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S4414-4JI: LCC44, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S4414-4PC: DIP40, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S4414-4PI: DIP40, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S4414-8AC: TQFP44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S4414-8AI: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S4414-8JC: LCC44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S4414-8JI: LCC44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S4414-8PC: DIP40, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S4414-8PI: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 190;
n_interrupts = 13;
stk500_devcode = 0x50;
avr910_devcode = 0x28;
chip_erase_delay = 20000;
signature = 0x1e 0x92 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x80 0x7f;
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 4096;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x7f 0x7f;
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
initval = 0xdf;
bitmask = 0x21;
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 9000;
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 256;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT90S2313
#------------------------------------------------------------
part # 2313
desc = "AT90S2313";
id = "2313";
variants =
"AT90S2313-10PC: DIP20, Fmax=10 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S2313-10PI: DIP20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S2313-10SC: SOIC20, Fmax=10 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S2313-10SI: SOIC20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S2313-4PC: DIP20, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S2313-4PI: DIP20, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"AT90S2313-4SC: SOIC20, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"AT90S2313-4SI: SOIC20, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 186;
n_interrupts = 11;
stk500_devcode = 0x40;
avr910_devcode = 0x20;
chip_erase_delay = 20000;
signature = 0x1e 0x91 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x80 0x7f;
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 2048;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x7f 0x7f;
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
initval = 0xdf;
bitmask = 0x21;
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 9000;
write = "1010.1100--111x.xiix--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 128;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT90S2333
#------------------------------------------------------------
part # 2333
##### WARNING: No XML file for device 'AT90S2333'! #####
desc = "AT90S2333";
id = "2333";
variants =
"AT90S2333-8AC: TQFP32, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S2333-8AI: TQFP32, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S2333-8PC: DIP28, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S2333-8PI: DIP28, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 188;
n_interrupts = 14;
stk500_devcode = 0x42;
avr910_devcode = 0x34;
chip_erase_delay = 20000;
signature = 0x1e 0x91 0x05;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x00 0xff;
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 20000;
pwroff_after_write = yes;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--xxoo.oooo";
write = "1010.1100--101i.iiii--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 128;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT90S2343 (also AT90S2323 and ATtiny22)
#------------------------------------------------------------
part # 2343
desc = "AT90S2343";
id = "2343";
variants =
"AT90S2343-10PC: DIP8, Fmax=10 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S2343-10PI: DIP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S2343-10SC: SOIC8, Fmax=10 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S2343-10SI: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP;
mcuid = 189;
n_interrupts = 3;
stk500_devcode = 0x43;
avr910_devcode = 0x4c;
chip_erase_delay = 18000;
signature = 0x1e 0x91 0x03;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x00,
0x68, 0x78, 0x68, 0x68, 0x00, 0x00, 0x68, 0x78,
0x78, 0x00, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
hventerstabdelay = 100;
latchcycles = 1;
poweroffdelay = 25;
resetdelayus = 50;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x00 0xff;
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--0000.0000--xaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.0000--xaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 2048;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 128;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
initval = 0xde;
bitmask = 0x21;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxox.xxxo";
write = "1010.1100--1011.111i--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 20000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x x x x x x x x x o1 o2 x x x x x x";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 128;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT90S2323
#------------------------------------------------------------
part parent "2343" # 2323
desc = "AT90S2323";
id = "2323";
variants =
"AT90S2323-10PC: DIP8, Fmax=10 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S2323-10PI: DIP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S2323-10SC: SOIC8, Fmax=10 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S2323-10SI: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]";
mcuid = 187;
stk500_devcode = 0x41;
avr910_devcode = 0x48;
signature = 0x1e 0x91 0x02;
;
#------------------------------------------------------------
# ATtiny22
#------------------------------------------------------------
part parent "2343" # t22
desc = "ATtiny22";
id = "t22";
variants =
"ATtiny22L-1PC: DIP8, Fmax=1 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"ATtiny22L-1PI: DIP8, Fmax=1 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]",
"ATtiny22L-1SC: SOIC8, Fmax=1 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 6 V]",
"ATtiny22L-1SI: SOIC8, Fmax=1 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 6 V]";
mcuid = 13;
stk500_devcode = 0x20;
avr910_devcode = 0x00; # Unknown
signature = 0x1e 0x91 0x06;
memory "fuse"
initval = -1;
;
;
#------------------------------------------------------------
# AT90S4433
#------------------------------------------------------------
part parent "2333" # 4433
desc = "AT90S4433";
id = "4433";
variants =
"AT90S4433-8AC: TQFP32, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S4433-8AI: TQFP32, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S4433-8PC: DIP28, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S4433-8PI: DIP28, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]";
mcuid = 191;
stk500_devcode = 0x51;
avr910_devcode = 0x30;
signature = 0x1e 0x92 0x03;
memory "eeprom"
size = 256;
read = "1010.0000--xxxx.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 4096;
read_lo = "0010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
initval = 0xda;
;
memory "lock"
initval = 0xff;
;
;
#------------------------------------------------------------
# AT90S8515
#------------------------------------------------------------
part # 8515
desc = "AT90S8515";
id = "8515";
variants =
"AT90S8515-8PC: DIP40, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 193;
n_interrupts = 13;
stk500_devcode = 0x60;
avr910_devcode = 0x38;
chip_erase_delay = 20000;
signature = 0x1e 0x93 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x80 0x7f;
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 8192;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x7f 0x7f;
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
initval = 0xdf;
bitmask = 0x21;
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 9000;
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 512;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT90S8535
#------------------------------------------------------------
part # 8535
desc = "AT90S8535";
id = "8535";
variants =
"AT90S8535-8AC: TQFP44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S8535-8AI: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S8535-8JC: LCC44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S8535-8JI: LCC44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S8535-8PC: DIP40, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S8535-8PI: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 195;
n_interrupts = 17;
stk500_devcode = 0x61;
avr910_devcode = 0x68;
chip_erase_delay = 20000;
signature = 0x1e 0x93 0x03;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0x00 0xff;
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 8192;
min_write_delay = 9000;
max_write_delay = 20000;
readback = 0xff 0xff;
mode = 0x04;
delay = 12;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
size = 1;
initval = 0xdf;
bitmask = 0x21;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxox.xxxo";
write = "1010.1100--1011.111i--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0 1 0 1 1 0 0 0 x x x x x x x x x x x x x x x x o1 o2 x x x x x x";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 512;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT90S4434
#------------------------------------------------------------
# No XML file for device AT90S4434, so parenting off AT90S8535
# with which it shares the datasheet.
part parent "8535" # 4434
desc = "AT90S4434";
id = "4434";
variants =
"AT90S4434-8AC: TQFP44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S4434-8AI: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S4434-8JC: LCC44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S4434-8JI: LCC44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]",
"AT90S4434-8PC: DIP40, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 6 V]",
"AT90S4434-8PI: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 6 V]";
mcuid = 192;
stk500_devcode = 0x52;
avr910_devcode = 0x6c;
signature = 0x1e 0x92 0x02;
memory "eeprom"
size = 256;
read = "1010.0000--xxxx.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--aaaa.aaaa--iiii.iiii";
;
memory "flash"
size = 4096;
read_lo = "0010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write_lo = "0100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
write_hi = "0100.1000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
;
memory "fuse"
max_write_delay = 20000;
;
memory "lock"
max_write_delay = 20000;
;
memory "sram"
size = 256;
;
;
#------------------------------------------------------------
# ATmega103
#------------------------------------------------------------
part # m103
desc = "ATmega103";
id = "m103";
variants =
"ATmega103-6AC: TQFP64, Fmax=6 MHz, T=[0 C, 70 C], Vcc=[4 V, 5.5 V]",
"ATmega103-6AI: TQFP64, Fmax=6 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATmega103L-4AC: TQFP64, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 3.6 V]",
"ATmega103L-4AI: TQFP64, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 3.6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 84;
n_interrupts = 24;
stk500_devcode = 0xb1;
avr910_devcode = 0x41;
chip_erase_delay = 112000;
pagel = 0xa0;
bs2 = 0xd7;
signature = 0x1e 0x97 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x8e, 0x9e, 0x2e, 0x3e, 0xae, 0xbe,
0x4e, 0x5e, 0xce, 0xde, 0x6e, 0x7e, 0xee, 0xde,
0x66, 0x76, 0xe6, 0xf6, 0x6a, 0x7a, 0xea, 0x7a,
0x7f, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepulsewidth = 15;
programfusepulsewidth = 2;
programlockpolltimeout = 10;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
min_write_delay = 4000;
max_write_delay = 9000;
readback = 0x80 0x7f;
mode = 0x04;
delay = 12;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 22000;
max_write_delay = 56000;
readback = 0xff 0xff;
mode = 0x11;
delay = 70;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "fuse"
size = 1;
initval = 0xdf;
bitmask = 0x2b;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--xxox.o1oo";
write = "1010.1100--1011.i1ii--xxxx.xxxx--xxxx.xxxx";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x06;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xoox";
write = "1010.1100--1111.1ii1--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 4000;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega64
#------------------------------------------------------------
part # m64
desc = "ATmega64";
id = "m64";
variants =
"ATmega64: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega64-16AN: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[4.5 V, 5.5 V]",
"ATmega64-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.2 V, 5.5 V]",
"ATmega64-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.2 V, 5.5 V]",
"ATmega64-16MN: QFN64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[4.5 V, 5.5 V]",
"ATmega64-16MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega64-16MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega64L-8AN: TQFP64, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8AQ: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8AQR: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8AUR: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8MN: QFN64, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8MQ: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8MQR: VQFN64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8MU: QFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64L-8MUR: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 72;
n_interrupts = 35;
n_boot_sections = 4;
boot_section_size = 1024;
stk500_devcode = 0xa0;
avr910_devcode = 0x45;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x02;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x22;
spmcr = 0x68;
eecr = 0x3c;
ocdrev = 2;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0x00;
mode = 0x21;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--xaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xe1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xfd;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega64A
#------------------------------------------------------------
part parent "m64" # m64a
desc = "ATmega64A";
id = "m64a";
variants =
"ATmega64A-AN: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64A-ANR: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64A-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64A-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64A-MN: QFN64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64A-MU: MLF64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64A-MUR: VQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 73;
;
#------------------------------------------------------------
# ATmega128
#------------------------------------------------------------
part # m128
desc = "ATmega128";
id = "m128";
variants =
"ATmega128-16AN: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[4.5 V, 5.5 V]",
"ATmega128-16ANR: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[4.5 V, 5.5 V]",
"ATmega128-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega128-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega128-16MN: MLF64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[4.5 V, 5.5 V]",
"ATmega128-16MNR: MLF64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega128-16MU: MLF64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega128-16MUR: MLF64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega128L-8AN: TQFP64, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[3 V, 5.5 V]",
"ATmega128L-8ANR: TQFP64, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[3 V, 5.5 V]",
"ATmega128L-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128L-8AUR: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128L-8MN: MLF64, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[3 V, 5.5 V]",
"ATmega128L-8MNR: MLF64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega128L-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128L-8MUR: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 85;
n_interrupts = 35;
n_boot_sections = 4;
boot_section_size = 1024;
stk500_devcode = 0xb2;
avr910_devcode = 0x43;
chip_erase_delay = 10000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x97 0x02;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x22;
rampz = 0x3b;
spmcr = 0x68;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 10000;
max_write_delay = 10000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 5000;
max_write_delay = 5000;
readback = 0xff 0x00;
mode = 0x21;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xe1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xfd;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega128A
#------------------------------------------------------------
part parent "m128" # m128a
desc = "ATmega128A";
id = "m128a";
variants =
"ATmega128A: TQFP64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega128A-AN: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128A-ANR: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128A-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128A-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128A-MN: VQFN64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128A-MNR: TQFP64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega128A-MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega128A-MUR: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 86;
;
#------------------------------------------------------------
# AT90CAN128
#------------------------------------------------------------
part # c128
desc = "AT90CAN128";
id = "c128";
variants =
"AT90CAN128: N/A, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, N/A]",
"AT90CAN128-15AZ: TQFP64, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN128-16AI: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN128-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN128-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN128-16MI: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN128-16MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN128-16MUR: QFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 176;
n_interrupts = 37;
n_boot_sections = 4;
boot_section_size = 1024;
stk500_devcode = 0xb3;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
# avr910_devcode = 0x43;
signature = 0x1e 0x97 0x81;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 8;
readsize = 256;
read = "1010.0000--000x.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90CAN64
#------------------------------------------------------------
part # c64
desc = "AT90CAN64";
id = "c64";
variants =
"AT90CAN64: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90CAN64-16AI: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN64-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN64-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN64-16MI: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN64-16MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN64-16MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 172;
n_interrupts = 37;
n_boot_sections = 4;
boot_section_size = 1024;
stk500_devcode = 0xb3;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
# avr910_devcode = 0x43;
signature = 0x1e 0x96 0x81;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 8;
readsize = 256;
read = "1010.0000--000x.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90CAN32
#------------------------------------------------------------
part # c32
desc = "AT90CAN32";
id = "c32";
variants =
"AT90CAN32: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90CAN32-16AI: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN32-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN32-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN32-16MI: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN32-16MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90CAN32-16MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 171;
n_interrupts = 37;
n_boot_sections = 4;
boot_section_size = 1024;
stk500_devcode = 0xb3;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
# avr910_devcode = 0x43;
signature = 0x1e 0x95 0x81;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 8;
readsize = 256;
read = "1010.0000--000x.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 256;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 2048;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega16
#------------------------------------------------------------
part # m16
desc = "ATmega16";
id = "m16";
variants =
"ATmega16: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega16-16AQR: TQFP44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega16-16AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega16-16AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega16-16MQ: MLF44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega16-16MU: MLF44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega16-16MUR: MLF44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega16-16PU: PDIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega16L-8AQ: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16L-8AQR: TQFP44, Fmax=8 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega16L-8AU: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16L-8AUR: TQFP44, Fmax=8 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega16L-8MU: MLF44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16L-8MUR: VQFN44, Fmax=8 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega16L-8PU: PDIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 49;
n_interrupts = 21;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x82;
avr910_devcode = 0x74;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x03;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 2;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0x00;
mode = 0x21;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xe1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--000x.xxxx--0000.00aa--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega16A
#------------------------------------------------------------
part parent "m16" # m16a
desc = "ATmega16A";
id = "m16a";
variants =
"ATmega16A: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega16A-AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16A-AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16A-MU: MLF44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16A-MUR: VQFN44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega16A-PU: PDIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 50;
;
#------------------------------------------------------------
# ATmega324P
#------------------------------------------------------------
part # m324p
desc = "ATmega324P";
id = "m324p";
variants =
"ATmega324P: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega324P-20AN: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20AQ: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20AQR: TQFP44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20MN: VQFN44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20MQR: VQFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20MUR: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20PN: PDIP40, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324P-20PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega324PV-10AN: TQFP44, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PV-10AU: TQFP44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PV-10AUR: TQFP44, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega324PV-10MN: VQFN44, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PV-10MU: VQFN44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PV-10PN: PDIP40, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PV-10PU: PDIP40, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 111;
n_interrupts = 31;
n_boot_sections = 4;
boot_section_size = 512;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 55000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x08;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--00xx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 2048;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega164P
#------------------------------------------------------------
part parent "m324p" # m164p
desc = "ATmega164P";
id = "m164p";
variants =
"ATmega164P: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega164P-20AN: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20AQ: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20MN: VQFN44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20MQ: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20MUR: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20PN: PDIP40, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20PQ: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164P-20PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega164PV-10AN: TQFP44, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PV-10AQ: VQFN44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PV-10AU: TQFP44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PV-10AUR: TQFP44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PV-10MU: VQFN44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PV-10MUR: VQFN44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PV-10PN: PDIP40, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PV-10PU: PDIP40, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 93;
boot_section_size = 256;
signature = 0x1e 0x94 0x0a;
memory "eeprom"
size = 512;
delay = 20;
;
memory "flash"
size = 0x4000;
num_pages = 128;
;
memory "sram"
size = 1024;
;
;
#------------------------------------------------------------
# ATmega164PA
#------------------------------------------------------------
part parent "m164p" # m164pa
desc = "ATmega164PA";
id = "m164pa";
variants =
"ATmega164PA: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-AN: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-ANR: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-CU: VFBGA49, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-CUR: VFBGA49, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-MCH: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-MCHR: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-MN: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-MNR: VQFN44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-MUR: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-PN: PDIP40, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164PA-PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 94;
;
#------------------------------------------------------------
# ATmega164A
#------------------------------------------------------------
part parent "m164p" # m164a
desc = "ATmega164A";
id = "m164a";
variants =
"ATmega164A: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-CU: VFBGA49, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-CUR: VFBGA49, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-MCH: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-MCHR: QFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-MU: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-MUR: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega164A-PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 92;
signature = 0x1e 0x94 0x0f;
;
#------------------------------------------------------------
# ATmega324PB
#------------------------------------------------------------
part parent "m324p" # m324pb
desc = "ATmega324PB";
id = "m324pb";
variants =
"ATmega324PB-AN: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PB-ANR: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PB-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PB-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PB-MN: QFN44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PB-MNR: QFN44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PB-MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PB-MUR: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 113;
n_interrupts = 51;
signature = 0x1e 0x95 0x17;
memory "efuse"
initval = 0x07;
bitmask = 0x0f;
write = "1010.1100--1010.0100--xxxx.xxxx--1111.iiii";
;
memory "prodsig"
size = 24;
read = "0 0 1 1 a0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 a4 a3 a2 a1 o o o o o o o o";
;
memory "sigrow"
alias "prodsig";
;
;
#------------------------------------------------------------
# ATmega324PA
#------------------------------------------------------------
part parent "m324p" # m324pa
desc = "ATmega324PA";
id = "m324pa";
variants =
"ATmega324PA: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-AN: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-CU: VFBGA49, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-MCH: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-MCHR: VQFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-MN: VQFN44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-MNR: VQFN44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-MUR: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-PN: PDIP40, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324PA-PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 112;
signature = 0x1e 0x95 0x11;
;
#------------------------------------------------------------
# ATmega324A
#------------------------------------------------------------
part parent "m324p" # m324a
desc = "ATmega324A";
id = "m324a";
variants =
"ATmega324A: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega324A-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324A-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324A-CU: VFBGA49, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324A-MCH: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324A-MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega324A-MUR: VQFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega324A-PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 110;
signature = 0x1e 0x95 0x15;
;
#------------------------------------------------------------
# ATmega644
#------------------------------------------------------------
part # m644
desc = "ATmega644";
id = "m644";
variants =
"ATmega644: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega644-20AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644-20AUR: TQFP44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega644-20MU: MLF44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644-20MUR: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644-20PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644V-10AU: TQFP44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644V-10AUR: TQFP44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644V-10MU: MLF44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644V-10MUR: VQFN44, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644V-10PU: PDIP40, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 127;
n_interrupts = 28;
n_boot_sections = 4;
boot_section_size = 1024;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 55000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x09;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
latchcycles = 6;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--00xx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega644A
#------------------------------------------------------------
part parent "m644" # m644a
desc = "ATmega644A";
id = "m644a";
variants =
"ATmega644A: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644A-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644A-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644A-MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644A-MUR: VQFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644A-PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 128;
n_interrupts = 31;
;
#------------------------------------------------------------
# ATmega644P
#------------------------------------------------------------
part parent "m644" # m644p
desc = "ATmega644P";
id = "m644p";
variants =
"ATmega644P: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega644P-20AN: TQFP44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20AQ: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20AQR: TQFP44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20MN: VQFN44, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20MQ: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20MQR: VQFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20MUR: VQFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20PN: PDIP40, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20PQ: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644P-20PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega644PV-10AN: TQFP44, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10AQ: TQFP44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10AQR: TQFP44, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10AU: TQFP44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10AUR: TQFP44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10MN: VQFN44, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10MQ: VQFN44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10MQR: VQFN44, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10MU: VQFN44, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10MUR: VQFN44, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10PN: PDIP40, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10PQ: PDIP40, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PV-10PU: PDIP40, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 129;
n_interrupts = 31;
signature = 0x1e 0x96 0x0a;
;
#------------------------------------------------------------
# ATmega644PA
#------------------------------------------------------------
part parent "m644" # m644pa
desc = "ATmega644PA";
id = "m644pa";
variants =
"ATmega644PA-AN: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-ANR: TQFP44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-MN: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-MNR: VQFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-MU: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-MUR: VQFN44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-PN: PDIP40, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega644PA-PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 130;
n_interrupts = 31;
signature = 0x1e 0x96 0x0a;
;
#------------------------------------------------------------
# ATmega1284
#------------------------------------------------------------
part # m1284
desc = "ATmega1284";
id = "m1284";
variants =
"ATmega1284-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284-MU: MLF44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284-MUR: MLF44, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega1284-PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 140;
n_interrupts = 35;
n_boot_sections = 4;
boot_section_size = 1024;
stk500_devcode = 0x82; # no STK500v1 support, use the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 55000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x97 0x06;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
latchcycles = 6;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 128;
read = "1010.0000--00xx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 128;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 0x4000;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega1284P
#------------------------------------------------------------
part parent "m1284" # m1284p
desc = "ATmega1284P";
id = "m1284p";
variants =
"ATmega1284P-AN: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284P-AU: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284P-AUR: TQFP44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284P-MN: QFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284P-MU: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284P-MUR: VQFN44, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284P-PN: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1284P-PU: PDIP40, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 141;
signature = 0x1e 0x97 0x05;
;
#------------------------------------------------------------
# ATmega162
#------------------------------------------------------------
part # m162
desc = "ATmega162";
id = "m162";
variants =
"ATmega162: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega162-16AC: TQFP44, Fmax=16 MHz, T=[0 C, 70 C], Vcc=[4.5 V, 5.5 V]",
"ATmega162-16AI: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16AJ: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16MC: VFQFN44, Fmax=16 MHz, T=[0 C, 70 C], Vcc=[4.5 V, 5.5 V]",
"ATmega162-16MI: VFQFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16MJ: VFQFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16MU: VFQFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16MUR: VFQFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16PC: DIP40, Fmax=16 MHz, T=[0 C, 70 C], Vcc=[4.5 V, 5.5 V]",
"ATmega162-16PI: DIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16PJ: DIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162-16PU: DIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162L-8AC: TQFP44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162L-8AI: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162L-8MC: VFQFN44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162L-8MI: VFQFN44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162L-8PC: DIP40, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162L-8PI: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega162V-1AC: TQFP44, Fmax=1 MHz, T=[0 C, 70 C], Vcc=[1.8 V, 3.6 V]",
"ATmega162V-1MC: VFQFN44, Fmax=1 MHz, T=[0 C, 70 C], Vcc=[1.8 V, 3.6 V]",
"ATmega162V-1PC: DIP40, Fmax=1 MHz, T=[0 C, 70 C], Vcc=[1.8 V, 3.6 V]",
"ATmega162V-8AI: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8AJ: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8AU: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8AUR: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8MI: VFQFN44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8MJ: VFQFN44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8MU: VFQFN44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8MUR: VFQFN44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8PI: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8PJ: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega162V-8PU: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 90;
n_interrupts = 28;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x83;
avr910_devcode = 0x63;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x04;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x04;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 2;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--00xx.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x1e;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--111i.iii1";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 16000;
max_write_delay = 16000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--00xx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--00xx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega163
#------------------------------------------------------------
part # m163
desc = "ATmega163";
id = "m163";
variants =
"ATmega163-8AC: TQFP44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 5.5 V]",
"ATmega163-8AI: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATmega163-8PC: DIP40, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 5.5 V]",
"ATmega163-8PI: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATmega163L-4AC: TQFP44, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega163L-4AI: TQFP44, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega163L-4PC: DIP40, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega163L-4PI: DIP40, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 91;
n_interrupts = 18;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x81;
avr910_devcode = 0x64;
chip_erase_delay = 32000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x02;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepolltimeout = 30;
programfusepolltimeout = 2;
programlockpolltimeout = 2;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 4000;
max_write_delay = 4000;
readback = 0xff 0xff;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 16000;
max_write_delay = 16000;
readback = 0xff 0xff;
mode = 0x11;
delay = 20;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xdf;
bitmask = 0xef;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.0000--xxxx.xxxx--ooxx.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--ii11.iiii";
;
memory "hfuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.1000--xxxx.xxxx--xxxx.1ooo";
write = "1010.1100--1010.1000--xxxx.xxxx--1111.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.0xxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "sram"
size = 1024;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega169
#------------------------------------------------------------
part # m169
desc = "ATmega169";
id = "m169";
variants =
"ATmega169: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega169-16AI: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169-16MI: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169-16MU: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169L-4AC: TQFP64, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169L-4MC: VFQFN64, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169L-8AI: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169L-8MI: VFQFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169V-1AC: TQFP64, Fmax=1 MHz, T=[0 C, 70 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169V-1MC: VFQFN64, Fmax=1 MHz, T=[0 C, 70 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169V-8AI: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169V-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169V-8MI: VFQFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169V-8MU: VFQFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 104;
n_interrupts = 23;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x85;
avr910_devcode = 0x78;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x05;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 2;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x0f;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega169A
#------------------------------------------------------------
part parent "m169" # m169a
desc = "ATmega169A";
id = "m169a";
variants =
"ATmega169A-AN: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169A-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169A-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169A-MCH: DRQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169A-MN: QFN64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169A-MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169A-MUR: QFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 105;
signature = 0x1e 0x94 0x11;
reset = io;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelay = 15;
memory "eeprom"
readback = 0x00 0x00;
;
memory "flash"
readback = 0x00 0x00;
delay = 10;
;
memory "io"
size = 224;
offset = 0x20;
;
;
#------------------------------------------------------------
# ATmega169P
#------------------------------------------------------------
part parent "m169" # m169p
desc = "ATmega169P";
id = "m169p";
variants =
"ATmega169P: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega169P-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169P-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169P-16MCH: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169P-16MCHR: QFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega169P-16MCU: VQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169P-16MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega169P-16MUR: QFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega169PV-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PV-8AUR: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PV-8MCH: QFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PV-8MCHR: QFN64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega169PV-8MCU: VQFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PV-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PV-8MUR: QFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 106;
reset = io;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelay = 15;
memory "eeprom"
readback = 0x00 0x00;
;
memory "flash"
readback = 0x00 0x00;
delay = 10;
;
memory "io"
size = 224;
offset = 0x20;
;
;
#------------------------------------------------------------
# ATmega169PA
#------------------------------------------------------------
part parent "m169" # m169pa
desc = "ATmega169PA";
id = "m169pa";
variants =
"ATmega169PA-AN: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PA-ANR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PA-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PA-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PA-MCH: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PA-MCHR: QFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega169PA-MN: VQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PA-MNR: QFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega169PA-MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega169PA-MUR: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 107;
reset = io;
latchcycles = 6;
togglevtg = 0;
poweroffdelay = 0;
resetdelayms = 0;
resetdelay = 15;
memory "eeprom"
readback = 0x00 0x00;
;
memory "flash"
readback = 0x00 0x00;
delay = 10;
;
memory "io"
size = 224;
offset = 0x20;
;
;
#------------------------------------------------------------
# ATmega329
#------------------------------------------------------------
part # m329
desc = "ATmega329";
id = "m329";
variants =
"ATmega329: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega329-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega329-16AUR: TQFP64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega329-16MU: MLF64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega329-16MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega329V-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329V-8AUR: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329V-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329V-8MUR: VQFN64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 121;
n_interrupts = 23;
n_boot_sections = 4;
boot_section_size = 512;
# stk500_devcode = 0x85; # no STK500 support, only STK500v2
# avr910_devcode = 0x?; # try the ATmega169 one:
avr910_devcode = 0x75;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x03;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 2048;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega329A
#------------------------------------------------------------
part parent "m329" # m329a
desc = "ATmega329A";
id = "m329a";
variants =
"ATmega329A-AN: TQFP64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329A-AU: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329A-AUR: TQFP64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega329A-MN: QFN64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329A-MU: VQFN64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 122;
;
#------------------------------------------------------------
# ATmega329P
#------------------------------------------------------------
part parent "m329" # m329p
desc = "ATmega329P";
id = "m329p";
variants =
"ATmega329P: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega329P-20AN: TQFP64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329P-20ANR: TQFP64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega329P-20AU: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega329P-20AUR: TQFP64, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega329P-20MN: VQFN64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega329P-20MNR: VQFN64, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega329P-20MU: MLF64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega329P-20MUR: VQFN64, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega329PV-10AU: TQFP64, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PV-10AUR: TQFP64, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PV-10MN: VQFN64, Fmax=10 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PV-10MU: MLF64, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PV-10MUR: VQFN64, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 123;
signature = 0x1e 0x95 0x0b;
;
#------------------------------------------------------------
# ATmega329PA
#------------------------------------------------------------
part parent "m329" # m329pa
desc = "ATmega329PA";
id = "m329pa";
variants =
"ATmega329PA-AN: TQFP64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PA-AU: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PA-AUR: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PA-MN: QFN64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PA-MU: QFN64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega329PA-MUR: VQFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 124;
signature = 0x1e 0x95 0x0b;
;
#------------------------------------------------------------
# ATmega3290
#------------------------------------------------------------
part parent "m329" # m3290
desc = "ATmega3290";
id = "m3290";
variants =
"ATmega3290: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega3290-16AU: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega3290-16AUR: TQFP100, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega3290V-8AU: TQFP100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3290V-8AUR: TQFP100, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 150;
n_interrupts = 25;
signature = 0x1e 0x95 0x04;
;
#------------------------------------------------------------
# ATmega3290A
#------------------------------------------------------------
part parent "m329" # m3290a
desc = "ATmega3290A";
id = "m3290a";
variants =
"ATmega3290A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega3290A-AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3290A-AUR: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 151;
n_interrupts = 25;
signature = 0x1e 0x95 0x04;
;
#------------------------------------------------------------
# ATmega3290P
#------------------------------------------------------------
part parent "m329" # m3290p
desc = "ATmega3290P";
id = "m3290p";
variants =
"ATmega3290P: TQFP100, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega3290P-20AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega3290P-20AUR: TQFP100, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega3290PV-10AU: TQFP100, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3290PV-10AUR: TQFP100, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 152;
n_interrupts = 25;
signature = 0x1e 0x95 0x0c;
;
#------------------------------------------------------------
# ATmega3290PA
#------------------------------------------------------------
part parent "m329" # m3290pa
desc = "ATmega3290PA";
id = "m3290pa";
variants =
"ATmega3290PA: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega3290PA-AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3290PA-AUR: TQFP100, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 153;
n_interrupts = 25;
signature = 0x1e 0x95 0x0c;
;
#------------------------------------------------------------
# ATmega649
#------------------------------------------------------------
part # m649
desc = "ATmega649";
id = "m649";
variants =
"ATmega649: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega649-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega649-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega649-16MU: MLF64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega649-16MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega649V-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega649V-8AUR: TQFP64, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega649V-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega649V-8MUR: VQFN64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 135;
n_interrupts = 23;
n_boot_sections = 4;
boot_section_size = 1024;
# stk500_devcode = 0x85; # no STK500 support, only STK500v2
# avr910_devcode = 0x?; # try the ATmega169 one:
avr910_devcode = 0x75;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x03;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega649A
#------------------------------------------------------------
part parent "m649" # m649a
desc = "ATmega649A";
id = "m649a";
variants =
"ATmega649A-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega649A-AUR: TQFP64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega649A-MU: VQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega649A-MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 136;
;
#------------------------------------------------------------
# ATmega649P
#------------------------------------------------------------
part parent "m649" # m649p
desc = "ATmega649P";
id = "m649p";
variants =
"ATmega649P-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega649P-AUR: TQFP64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega649P-MU: VQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega649P-MUR: VQFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 137;
signature = 0x1e 0x96 0x0b;
;
#------------------------------------------------------------
# ATmega6490
#------------------------------------------------------------
part parent "m649" # m6490
desc = "ATmega6490";
id = "m6490";
variants =
"ATmega6490: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega6490-16AU: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega6490-16AUR: TQFP100, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega6490V-8AU: TQFP100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega6490V-8AUR: TQFP100, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 157;
n_interrupts = 25;
signature = 0x1e 0x96 0x04;
;
#------------------------------------------------------------
# ATmega6490A
#------------------------------------------------------------
part parent "m649" # m6490a
desc = "ATmega6490A";
id = "m6490a";
variants =
"ATmega6490A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega6490A-AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega6490A-AUR: TQFP100, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 158;
n_interrupts = 25;
signature = 0x1e 0x96 0x04;
;
#------------------------------------------------------------
# ATmega6490P
#------------------------------------------------------------
part parent "m649" # m6490p
desc = "ATmega6490P";
id = "m6490p";
variants =
"ATmega6490P: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega6490P-AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega6490P-AUR: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 159;
n_interrupts = 25;
signature = 0x1e 0x96 0x0c;
;
#------------------------------------------------------------
# ATmega32
#------------------------------------------------------------
part # m32
desc = "ATmega32";
id = "m32";
variants =
"ATmega32: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega32-16AQ: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega32-16AQR: TQFP44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega32-16AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega32-16AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega32-16MU: MLF44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega32-16MUR: VQFN44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega32-16PU: PDIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega32L-8AU: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32L-8AUR: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32L-8MU: MLF44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32L-8MUR: VQFN44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32L-8PU: PDIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG | PM_JTAGmkI;
mcuid = 58;
n_interrupts = 21;
n_boot_sections = 4;
boot_section_size = 512;
stk500_devcode = 0x91;
avr910_devcode = 0x72;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x02;
reset = io;
allowfullpagebitstream = yes;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 2;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 64;
readsize = 256;
read = "1010.0000--00xx.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0x00;
mode = 0x21;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xe1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--00xx.xxxx--0000.00aa--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 2048;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega161
#------------------------------------------------------------
part # m161
desc = "ATmega161";
id = "m161";
variants =
"ATmega161-8AC: TQFP44, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 5.5 V]",
"ATmega161-8AI: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATmega161-8PC: DIP40, Fmax=8 MHz, T=[0 C, 70 C], Vcc=[4 V, 5.5 V]",
"ATmega161-8PI: DIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 5.5 V]",
"ATmega161L-4AC: TQFP44, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega161L-4AI: TQFP44, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega161L-4PC: DIP40, Fmax=4 MHz, T=[0 C, 70 C], Vcc=[2.7 V, 5.5 V]",
"ATmega161L-4PI: DIP40, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 89;
n_interrupts = 21;
n_boot_sections = 1;
boot_section_size = 1024;
stk500_devcode = 0x80;
avr910_devcode = 0x60;
chip_erase_delay = 28000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x01;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
chiperasepolltimeout = 30;
programfusepolltimeout = 2;
programlockpolltimeout = 2;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 3400;
max_write_delay = 3400;
readback = 0xff 0xff;
mode = 0x04;
delay = 5;
blocksize = 128;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 14000;
max_write_delay = 14000;
readback = 0xff 0xff;
mode = 0x21;
delay = 16;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "fuse"
size = 1;
initval = 0xda;
bitmask = 0x77;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--xxxx.xxxx--xxxx.xxxx--xoxo.oooo";
write = "1010.1100--101x.xxxx--xxxx.xxxx--1i1i.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "sram"
size = 1024;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega32A
#------------------------------------------------------------
part parent "m32" # m32a
desc = "ATmega32A";
id = "m32a";
variants =
"ATmega32A-AN: TQFP44, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-ANR: TQFP44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-MN: VQFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-MNR: VQFN44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-MU: MLF44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-MUR: VQFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-PN: PDIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32A-PU: PDIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 59;
;
#------------------------------------------------------------
# ATmega8
#------------------------------------------------------------
part # m8
desc = "ATmega8";
id = "m8";
variants =
"ATmega8: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega8-16AN: TQFP32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8-16AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8-16AUR: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8-16MN: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8-16MU: MLF32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8-16MUR: MLF32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8-16PN: PDIP28, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8-16PU: PDIP28, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8L-8AN: TQFP32, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8L-8AU: TQFP32, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8L-8AUR: TQFP32, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8L-8MN: QFN32, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8L-8MU: MLF32, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8L-8MUR: VQFN32, Fmax=8 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega8L-8PN: PDIP28, Fmax=8 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8L-8PU: PDIP28, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 45;
n_interrupts = 19;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x70;
avr910_devcode = 0x76;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
signature = 0x1e 0x93 0x07;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 20;
programfusepolltimeout = 10;
programlockpolltimeout = 10;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0x00;
mode = 0x21;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xe1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--00xx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--00xx.xxxx--0000.00aa--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega8A
#------------------------------------------------------------
part parent "m8" # m8a
desc = "ATmega8A";
id = "m8a";
variants =
"ATmega8A: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-AN: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-ANR: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-AUR: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-MN: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-MNR: VQFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-MU: VQFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-MUR: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-PN: PDIP28, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8A-PU: PDIP28, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 46;
;
#------------------------------------------------------------
# ATmega8515
#------------------------------------------------------------
part # m8515
desc = "ATmega8515";
id = "m8515";
variants =
"ATmega8515: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega8515-16AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8515-16AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8515-16JU: PLCC44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8515-16JUR: PLCC44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8515-16MU: QFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8515-16MUR: VQFN44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega8515-16PU: PDIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8515L-8AU: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8515L-8AUR: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8515L-8JU: PLCC44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8515L-8JUR: PLCC44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8515L-8MU: MLF44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8515L-8MUR: VQFN44, Fmax=8 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega8515L-8PU: PDIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 160;
n_interrupts = 17;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x63;
avr910_devcode = 0x3a;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x93 0x06;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0x00;
mode = 0x21;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xe1;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--00xx.xxxx--0000.00aa--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega8535
#------------------------------------------------------------
part # m8535
desc = "ATmega8535";
id = "m8535";
variants =
"ATmega8535: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega8535-16AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8535-16AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8535-16JU: PLCC44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8535-16JUR: PLCC44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8535-16MU: MLF44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8535-16MUR: VQFN44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega8535-16PU: PDIP40, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega8535L-8AU: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8535L-8AUR: TQFP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8535L-8JU: PLCC44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8535L-8JUR: PLCC44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8535L-8MU: MLF44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8535L-8MUR: MLF44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8535L-8PU: PDIP40, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP;
mcuid = 161;
n_interrupts = 21;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x64;
avr910_devcode = 0x69;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x93 0x08;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 128;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0x00;
mode = 0x21;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xe1;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 2000;
max_write_delay = 2000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--00xx.xxxx--0000.00aa--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny26
#------------------------------------------------------------
part # t26
desc = "ATtiny26";
id = "t26";
variants =
"ATtiny26: N/A, Fmax=16 MHz, T=[N/A, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny26-16MU: MLF32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATtiny26-16MUR: VQFN32, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATtiny26-16PU: PDIP20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATtiny26-16SU: SOIC20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATtiny26-16SUR: SOIC20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATtiny26L-8MU: MLF32, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny26L-8MUR: VQFN32, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny26L-8PU: PDIP20, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny26L-8SU: SOIC20, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny26L-8SUR: SOIC20, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_ISP | PM_HVPP;
mcuid = 17;
n_interrupts = 12;
stk500_devcode = 0x21;
avr910_devcode = 0x5e;
chip_erase_delay = 9000;
pagel = 0xb3;
bs2 = 0xb2;
signature = 0x1e 0x91 0x09;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 2;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 20;
programfusepolltimeout = 10;
programlockpolltimeout = 10;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
min_write_delay = 9000;
max_write_delay = 9000;
readback = 0xff 0xff;
mode = 0x04;
delay = 20;
blocksize = 64;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0x00;
mode = 0x21;
delay = 10;
blocksize = 16;
readsize = 256;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--xxxx.xxaa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xe1;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xf7;
bitmask = 0x1f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--xxxi.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxoo";
write = "1010.1100--1111.11ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 4;
read = "0011.1000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 128;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny261
#------------------------------------------------------------
part # t261
desc = "ATtiny261";
id = "t261";
variants =
"ATtiny261: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[N/A, N/A]",
"ATtiny261-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny261-20PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny261-20SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny261V-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261V-10PU: PDIP20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261V-10SU: SOIC20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 30;
n_interrupts = 19;
chip_erase_delay = 4000;
pagel = 0xb3;
bs2 = 0xb2;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x91 0x0c;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb4, 0x00, 0x10;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x00, 0xb4, 0x00, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x20;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
page_size = 4;
num_pages = 32;
min_write_delay = 4000;
max_write_delay = 4000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xxaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--xxxx.xxaa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxoo";
write = "1010.1100--1111.11ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 128;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny261A
#------------------------------------------------------------
part parent "t261" # t261a
desc = "ATtiny261A";
id = "t261a";
variants =
"ATtiny261A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-MF: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-MFR: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-MN: MLF32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-MNR: VQFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-XU: TSSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny261A-XUR: TSSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 31;
;
#------------------------------------------------------------
# ATtiny461
#------------------------------------------------------------
part # t461
desc = "ATtiny461";
id = "t461";
variants =
"ATtiny461: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[N/A, N/A]",
"ATtiny461-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny461-20MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny461-20PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny461-20SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny461-20SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny461V-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny461V-10MUR: VQFN32, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny461V-10PU: PDIP20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny461V-10SU: SOIC20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny461V-10SUR: SOIC20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 33;
n_interrupts = 19;
chip_erase_delay = 4000;
pagel = 0xb3;
bs2 = 0xb2;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x92 0x08;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb4, 0x00, 0x10;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x00, 0xb4, 0x00, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x20;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
num_pages = 64;
min_write_delay = 4000;
max_write_delay = 4000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxx.xaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxoo";
write = "1010.1100--1111.11ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 256;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny461A
#------------------------------------------------------------
part parent "t461" # t461a
desc = "ATtiny461A";
id = "t461a";
variants =
"ATtiny461A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny461A-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny461A-PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny461A-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny461A-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny461A-XU: TSSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny461A-XUR: TSSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 34;
;
#------------------------------------------------------------
# ATtiny861
#------------------------------------------------------------
part # t861
desc = "ATtiny861";
id = "t861";
variants =
"ATtiny861: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[N/A, N/A]",
"ATtiny861-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny861-20MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny861-20PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny861-20SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny861-20SUR: SOIC20, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny861V-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861V-10MUR: VQFN32, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny861V-10PU: PDIP20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861V-10SU: SOIC20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861V-10SUR: SOIC20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 38;
n_interrupts = 19;
chip_erase_delay = 4000;
pagel = 0xb3;
bs2 = 0xb2;
# stk500_devcode = 0x21;
# avr910_devcode = 0x5e;
signature = 0x1e 0x93 0x0d;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb4, 0x00, 0x10;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x00, 0xb4, 0x00, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x20;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 4000;
max_write_delay = 4000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxx.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--xxxx.xxxx--xxxx.xxxx--xxxx.xxoo";
write = "1010.1100--1111.11ii--xxxx.xxxx--xxxx.xxxx";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny861A
#------------------------------------------------------------
part parent "t861" # t861a
desc = "ATtiny861A";
id = "t861a";
variants =
"ATtiny861A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny861A-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861A-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861A-PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861A-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861A-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861A-XU: TSSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny861A-XUR: TSSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 39;
;
#------------------------------------------------------------
# ATtiny28
#------------------------------------------------------------
# This is an HVPP-only device.
part # t28
desc = "ATtiny28";
id = "t28";
variants =
"ATtiny28: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny28L-4AU: TQFP32, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny28L-4MU: MLF32, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny28L-4MUR: VQFN32, Fmax=4 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny28L-4PU: PDIP28, Fmax=4 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny28V-1AU: TQFP32, Fmax=1.2 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny28V-1AUR: TQFP32, Fmax=1 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny28V-1MU: MLF32, Fmax=1.2 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny28V-1MUR: VQFN32, Fmax=1 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny28V-1PU: PDIP28, Fmax=1.2 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_HVPP;
mcuid = 18;
n_interrupts = 6;
stk500_devcode = 0x22;
avr910_devcode = 0x5c;
signature = 0x1e 0x91 0x07;
serial = no;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
factory_fcpu = 1200000;
memory "flash"
size = 2048;
page_size = 2;
delay = 5;
readsize = 256;
;
memory "fuse"
size = 1;
initval = 0x12;
bitmask = 0x1f;
;
memory "lock"
size = 1;
initval = 0x06;
bitmask = 0x06;
;
memory "signature"
size = 3;
;
memory "calibration"
size = 1;
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 32;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega48
#------------------------------------------------------------
part # m48
desc = "ATmega48";
id = "m48";
variants =
"ATmega48: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega48-20AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48-20AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48-20MMH: VQFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48-20MMU: MLF28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48-20MUR: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48-20PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48V-10AU: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48V-10AUR: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48V-10MMH: VQFN28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48V-10MMU: QFN28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48V-10MMUR: VQFN28, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega48V-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48V-10MUR: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48V-10PU: PDIP28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 67;
n_interrupts = 26;
stk500_devcode = 0x59;
chip_erase_delay = 45000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x92 0x05;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--0000.0000--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega48A
#------------------------------------------------------------
part parent "m48" # m48a
desc = "ATmega48A";
id = "m48a";
variants =
"ATmega48A-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48A-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48A-CCU: UFBGA32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48A-MMH: VQFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48A-MMHR: VQFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48A-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48A-MUR: VQFN32, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega48A-PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 68;
;
#------------------------------------------------------------
# ATmega48P
#------------------------------------------------------------
part parent "m48" # m48p
desc = "ATmega48P";
id = "m48p";
variants =
"ATmega48P-20AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48P-20AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48P-20MMU: MLF28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48P-20MMUR: VQFN28, Fmax=N/A, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega48P-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48P-20MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48P-20PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega48PV-10AU: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PV-10AUR: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PV-10MMU: MLF28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PV-10MMUR: VQFN28, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega48PV-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PV-10MUR: VQFN32, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega48PV-10PU: PDIP28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 69;
signature = 0x1e 0x92 0x0a;
;
#------------------------------------------------------------
# ATmega48PA
#------------------------------------------------------------
part parent "m48" # m48pa
desc = "ATmega48PA";
id = "m48pa";
variants =
"ATmega48PA: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-AN: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-AUR: QFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-CCU: UFBGA32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-MMH: QFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-MMHR: QFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-MMN: QFN28, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-MMNR: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-MN: QFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-MNR: QFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-PN: SPDIP28, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PA-PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 70;
signature = 0x1e 0x92 0x0a;
;
#------------------------------------------------------------
# ATmega48PB
#------------------------------------------------------------
part parent "m48" # m48pb
desc = "ATmega48PB";
id = "m48pb";
variants =
"ATmega48PB-AN: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PB-ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PB-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PB-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PB-MN: VQFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PB-MNR: VQFN32, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega48PB-MU: VFQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega48PB-MUR: VQFN32, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 71;
n_interrupts = 27;
chip_erase_delay = 10500;
signature = 0x1e 0x92 0x10;
;
#------------------------------------------------------------
# ATmega88
#------------------------------------------------------------
part # m88
desc = "ATmega88";
id = "m88";
variants =
"ATmega88: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega88-20AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88-20AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88-20MUR: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88-20PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88V-10AU: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88V-10AUR: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88V-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88V-10MUR: VQFN32, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega88V-10PU: PDIP28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 79;
n_interrupts = 26;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x73;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x93 0x0a;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf9;
bitmask = 0x07;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega88A
#------------------------------------------------------------
part parent "m88" # m88a
desc = "ATmega88A";
id = "m88a";
variants =
"ATmega88A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega88A-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88A-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88A-CCU: UFBGA32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88A-MMH: QFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88A-MMHR: VQFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88A-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88A-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88A-PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 80;
;
#------------------------------------------------------------
# ATmega88P
#------------------------------------------------------------
part parent "m88" # m88p
desc = "ATmega88P";
id = "m88p";
variants =
"ATmega88P-20AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88P-20AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88P-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88P-20MUR: VQFN32, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega88P-20PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega88PV-10AU: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PV-10AUR: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PV-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PV-10MUR: VQFN32, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega88PV-10PU: PDIP28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 81;
signature = 0x1e 0x93 0x0f;
;
#------------------------------------------------------------
# ATmega88PA
#------------------------------------------------------------
part parent "m88" # m88pa
desc = "ATmega88PA";
id = "m88pa";
variants =
"ATmega88PA: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-15MZ: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-AN: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-CCU: UFBGA32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MMH: QFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MMHR: VQFN28, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MMN: VQFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MMNR: VQFN28, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MMUR: PDIP28, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MN: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MNR: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-PN: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PA-PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 82;
signature = 0x1e 0x93 0x0f;
;
#------------------------------------------------------------
# ATmega88PB
#------------------------------------------------------------
part parent "m88" # m88pb
desc = "ATmega88PB";
id = "m88pb";
variants =
"ATmega88PB-AN: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PB-ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PB-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PB-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PB-MN: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PB-MNR: VQFN32, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega88PB-MU: VFQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega88PB-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 83;
n_interrupts = 27;
chip_erase_delay = 10500;
signature = 0x1e 0x93 0x16;
;
#------------------------------------------------------------
# ATmega168
#------------------------------------------------------------
part # m168
desc = "ATmega168";
id = "m168";
variants =
"ATmega168: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega168-15AD: TQFP32, Fmax=16 MHz, T=[-40 C, 150 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168-20AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168-20AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168-20MQ: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168-20MQR: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168-20MUR: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168-20PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168V-10AU: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168V-10AUR: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168V-10MQ: QFN32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168V-10MQR: QFN32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168V-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168V-10MUR: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168V-10PU: PDIP28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 99;
n_interrupts = 26;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x86;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x94 0x06;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--000a.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf9;
bitmask = 0x07;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega168A
#------------------------------------------------------------
part parent "m168" # m168a
desc = "ATmega168A";
id = "m168a";
variants =
"ATmega168A: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega168A-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168A-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168A-CCU: UFBGA32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168A-MMH: VQFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168A-MMHR: VQFN28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168A-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168A-MUR: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168A-PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 100;
;
#------------------------------------------------------------
# ATmega168P
#------------------------------------------------------------
part parent "m168" # m168p
desc = "ATmega168P";
id = "m168p";
variants =
"ATmega168P-20AN: TQFP32, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega168P-20ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168P-20AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168P-20AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168P-20MQ: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168P-20MQR: QFN32, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega168P-20MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168P-20MUR: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168P-20PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega168PV-10AN: TQFP32, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega168PV-10AU: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PV-10AUR: TQFP32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PV-10MU: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PV-10MUR: MLF32, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PV-10PU: PDIP28, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 101;
signature = 0x1e 0x94 0x0b;
;
#------------------------------------------------------------
# ATmega168PA
#------------------------------------------------------------
part parent "m168" # m168pa
desc = "ATmega168PA";
id = "m168pa";
variants =
"ATmega168PA: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-AN: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-CCU: UFBGA32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-MMH: MLF28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-MMHR: QFN32, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-MN: QFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-MNR: QFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-MU: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-MUR: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-PN: PDIP28, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PA-PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 102;
signature = 0x1e 0x94 0x0b;
;
#------------------------------------------------------------
# ATmega168PB
#------------------------------------------------------------
part parent "m168" # m168pb
desc = "ATmega168PB";
id = "m168pb";
variants =
"ATmega168PB-AN: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PB-ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PB-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PB-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PB-MN: VQFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PB-MU: VFQFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega168PB-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 103;
n_interrupts = 27;
chip_erase_delay = 10500;
signature = 0x1e 0x94 0x15;
;
#------------------------------------------------------------
# ATtiny828
#------------------------------------------------------------
part # t828
desc = "ATtiny828";
id = "t828";
variants =
"ATtiny828: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.62 V, 5.5 V]",
"ATtiny828-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny828-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny828-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny828-MUR: VQFN32, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 35;
n_interrupts = 26;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x86;
chip_erase_delay = 15000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x93 0x14;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x6e;
bitmask = 0xf3;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0xf7;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATtiny828R
#------------------------------------------------------------
part parent "t828" # t828r
desc = "ATtiny828R";
id = "t828r";
variants =
"ATtiny828R-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny828R-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]";
mcuid = 36;
;
#------------------------------------------------------------
# ATtiny87
#------------------------------------------------------------
part # t87
desc = "ATtiny87";
id = "t87";
variants =
"ATtiny87: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny87-MU: VQFN32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny87-MUR: VQFN32, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny87-SU: SOIC20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny87-SUR: SOIC20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny87-XU: TSSOP20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny87-XUR: TSSOP20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 27;
n_interrupts = 20;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 15000;
pagel = 0xb3;
bs2 = 0xb2;
signature = 0x1e 0x93 0x87;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x06, 0x16, 0x46, 0x56, 0x0a, 0x1a, 0x4a, 0x5a,
0x1e, 0x7c, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 128;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny87 has signature bytes 0x1E 0x93 0x87
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATtiny167
#------------------------------------------------------------
part # t167
desc = "ATtiny167";
id = "t167";
variants =
"ATtiny167: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny167-A15XD: TSSOP20, Fmax=16 MHz, T=[-40 C, 150 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny167-MMU: WQFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny167-MMUR: WQFN20, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATtiny167-MU: VQFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny167-MUR: VQFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny167-SU: SOIC20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny167-SUR: SOIC20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny167-XU: TSSOP20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny167-XUR: TSSOP20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 29;
n_interrupts = 20;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = 0x??;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 15000;
pagel = 0xb3;
bs2 = 0xb2;
signature = 0x1e 0x94 0x87;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x06, 0x16, 0x46, 0x56, 0x0a, 0x1a, 0x4a, 0x5a,
0x1e, 0x7c, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--00xx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--00xx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--000a.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATtiny48
#------------------------------------------------------------
part # t48
desc = "ATtiny48";
id = "t48";
variants =
"ATtiny48-AU: TQFP32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-AUR: TQFP32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-CCU: UFBGA32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-MMH: VQFN28, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-MMHR: VQFN28, Fmax=12 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-MMU: MLF28, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-MMUR: VQFN28, Fmax=12 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-MU: MLF32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-MUR: VQFN32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny48-PU: PDIP28, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 23;
n_interrupts = 20;
stk500_devcode = 0x73;
chip_erase_delay = 15000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x92 0x09;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x6e;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.111i";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 256;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATtiny88
#------------------------------------------------------------
part # t88
desc = "ATtiny88";
id = "t88";
variants =
"ATtiny88-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-AUR: TQFP32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-CCU: UFBGA32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-MMH: VQFN28, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-MMHR: VQFN28, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-MMU: QFN28, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-MMUR: QFN28, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-MU: QFN32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-MUR: VQFN32, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny88-PU: PDIP28, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 28;
n_interrupts = 20;
stk500_devcode = 0x73;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x93 0x11;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x6e;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega328
#------------------------------------------------------------
part # m328
desc = "ATmega328";
id = "m328";
variants =
"ATmega328-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328-MMH: MLF28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328-MMHR: MLF28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328-MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328-MUR: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328-PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 118;
n_interrupts = 26;
n_boot_sections = 4;
boot_section_size = 512;
stk500_devcode = 0x86;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc2;
# avr910_devcode = 0x??;
signature = 0x1e 0x95 0x14;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 2048;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega328P
#------------------------------------------------------------
part parent "m328" # m328p
desc = "ATmega328P";
id = "m328p";
variants =
"ATmega328P: N/A, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-15MZ: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-AN: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-MMH: MLF28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-MMHR: MLF28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-MN: QFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-MNR: MLF32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-MU: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-MUR: MLF32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-PN: PDIP28, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328P-PU: PDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 119;
signature = 0x1e 0x95 0x0f;
;
#------------------------------------------------------------
# ATmega328PB
#------------------------------------------------------------
part parent "m328" # m328pb
desc = "ATmega328PB";
id = "m328pb";
variants =
"ATmega328PB-AN: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328PB-ANR: TQFP32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328PB-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328PB-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328PB-MN: QFN32, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328PB-MNR: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328PB-MU: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega328PB-MUR: QFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 120;
n_interrupts = 45;
chip_erase_delay = 10500;
signature = 0x1e 0x95 0x16;
memory "efuse"
initval = 0xf7;
bitmask = 0x0f;
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "prodsig"
size = 24;
read = "0 0 1 1 a0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 a4 a3 a2 a1 o o o o o o o o";
;
memory "sigrow"
alias "prodsig";
;
;
#------------------------------------------------------------
# ATmega64M1
#------------------------------------------------------------
part # m64m1
desc = "ATmega64M1";
id = "m64m1";
variants =
"ATmega64M1-15MD: VQFN32, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega64M1-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64M1-MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 76;
n_interrupts = 31;
n_boot_sections = 4;
boot_section_size = 1024;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xe2;
signature = 0x1e 0x96 0x84;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.0aaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--0000.0aaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--0aaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--0aaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--a000.0000--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--11oo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--11ii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--11oo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega32M1
#------------------------------------------------------------
part parent "m64m1" # m32m1
desc = "ATmega32M1";
id = "m32m1";
variants =
"ATmega32M1: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega32M1-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32M1-AUR: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32M1-MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 63;
boot_section_size = 512;
signature = 0x1e 0x95 0x84;
memory "eeprom"
size = 1024;
page_size = 4;
blocksize = 4;
read = "1010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.00aa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.00aa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
size = 0x8000;
page_size = 128;
blocksize = 128;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--00aa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--00aa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aa00.0000--xxxx.xxxx";
;
memory "sram"
size = 2048;
;
;
#------------------------------------------------------------
# ATmega16M1
#------------------------------------------------------------
part parent "m32m1" # m16m1
desc = "ATmega16M1";
id = "m16m1";
variants =
"ATmega16M1-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16M1-MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 54;
signature = 0x1e 0x94 0x84;
memory "eeprom"
size = 512;
read = "1010.0000--0000.000a--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.000a--aaaa.aaaa--iiii.iiii";
writepage = "1100.0010--0000.000a--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
size = 0x4000;
num_pages = 128;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
writepage = "0100.1100--000a.aaaa--aa00.0000--xxxx.xxxx";
;
memory "sram"
size = 1024;
;
;
#------------------------------------------------------------
# ATmega32C1
#------------------------------------------------------------
part parent "m32m1" # m32c1
desc = "ATmega32C1";
id = "m32c1";
variants =
"ATmega32C1-15AD: TQFP32, Fmax=16 MHz, T=[-40 C, 150 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32C1-15AZ: TQFP32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32C1-15MD: VQFN32, Fmax=16 MHz, T=[-40 C, 150 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32C1-15MZ: VQFN32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32C1-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32C1-ESAD: TQFP32, Fmax=16 MHz, T=[-40 C, 150 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32C1-ESMD: VQFN32, Fmax=16 MHz, T=[-40 C, 150 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32C1-MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 62;
signature = 0x1e 0x95 0x86;
;
#------------------------------------------------------------
# ATmega64C1
#------------------------------------------------------------
part parent "m64m1" # m64c1
desc = "ATmega64C1";
id = "m64c1";
variants =
"ATmega64C1-15AD: TQFP32, Fmax=16 MHz, T=[-40 C, 150 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64C1-15AZ: TQFP32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64C1-15MD: VQFN32, Fmax=16 MHz, T=[-40 C, 150 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64C1-15MZ: VQFN32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64C1-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64C1-ESAZ: TQFP32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64C1-ESMZ: VQFN32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATmega64C1-MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 75;
signature = 0x1e 0x96 0x86;
;
#------------------------------------------------------------
# ATA5505
#------------------------------------------------------------
part parent "t167" # ata5505
desc = "ATA5505";
id = "ata5505";
variants =
"ATA5505: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATA5505-P3QW: VFQFN38, Fmax=N/A, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 198;
chip_erase_delay = 4000;
reset = dedicated;
memory "eeprom"
max_write_delay = 4000;
;
memory "lfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--1111.111o";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.111i";
;
memory "lock"
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--1111.11oo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--1111.11ii";
;
;
#------------------------------------------------------------
# ATA6612C
#------------------------------------------------------------
part parent "m88" # ata6612c
desc = "ATA6612C";
id = "ata6612c";
variants =
"ATA6612C-PLQW: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATA6612C-PLQW-1: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 216;
chip_erase_delay = 4000;
memory "eeprom"
min_write_delay = 4000;
max_write_delay = 4000;
;
memory "efuse"
read = "0101.0000--0000.1000--xxxx.xxxx--1111.1ooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
read = "0101.1000--0000.0000--xxxx.xxxx--11oo.oooo";
;
;
#------------------------------------------------------------
# ATA6613C
#------------------------------------------------------------
part parent "m168" # ata6613c
desc = "ATA6613C";
id = "ata6613c";
variants =
"ATA6613C-PLQW: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATA6613C-PLQW-1: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 217;
memory "efuse"
read = "0101.0000--0000.1000--xxxx.xxxx--1111.1ooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
read = "0101.1000--0000.0000--xxxx.xxxx--11oo.oooo";
;
;
#------------------------------------------------------------
# ATA6614Q
#------------------------------------------------------------
part parent "m328" # ata6614q
desc = "ATA6614Q";
id = "ata6614q";
variants =
"ATA6614Q-PLQW: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATA6614Q-PLQW-1: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 218;
signature = 0x1e 0x95 0x0f;
memory "efuse"
read = "0101.0000--0000.1000--xxxx.xxxx--1111.1ooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.1iii";
;
memory "lock"
read = "0101.1000--0000.0000--xxxx.xxxx--11oo.oooo";
;
;
#------------------------------------------------------------
# ATA6616C
#------------------------------------------------------------
part parent "t87" # ata6616c
desc = "ATA6616C";
id = "ata6616c";
variants =
"ATA6616C-P3PW: VFQFN38, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATA6616C-P3QW: VFQFN38, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATA6616C-P3QW-1: VFQFN38, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 219;
chip_erase_delay = 4000;
reset = dedicated;
memory "eeprom"
max_write_delay = 4000;
;
memory "flash"
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
writepage = "0100.1100--0000.aaaa--aa00.0000--xxxx.xxxx";
;
memory "lfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--1111.111o";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.111i";
;
memory "lock"
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--1111.11oo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--1111.11ii";
;
;
#------------------------------------------------------------
# ATA6617C
#------------------------------------------------------------
part parent "t167" # ata6617c
desc = "ATA6617C";
id = "ata6617c";
variants =
"ATA6617C-P3QW: VFQFN38, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATA6617C-P3QW-1: VFQFN38, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 220;
chip_erase_delay = 4000;
reset = dedicated;
memory "eeprom"
max_write_delay = 4000;
;
memory "lfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--1111.111o";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.111i";
;
memory "lock"
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--1111.11oo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--1111.11ii";
;
;
#------------------------------------------------------------
# ATA664251
#------------------------------------------------------------
part parent "t167" # ata664251
desc = "ATA664251";
id = "ata664251";
variants =
"ATA664251: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATA664251-WGQW: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATA664251-WGQW-1: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 225;
chip_erase_delay = 4000;
reset = dedicated;
memory "eeprom"
max_write_delay = 4000;
;
memory "lfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--1111.111o";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.111i";
;
memory "lock"
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--1111.11oo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--1111.11ii";
;
;
#------------------------------------------------------------
# ATmega16HVA
#------------------------------------------------------------
part # m16hva
desc = "ATmega16HVA";
id = "m16hva";
variants =
"ATmega16HVA: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 4.5 V]",
"ATmega16HVA-4CKU: WFLGA36, Fmax=4 MHz, T=[-20 C, 85 C], Vcc=[1.8 V, 9 V]",
"ATmega16HVA-4CKUR: WFLGA36, Fmax=4 MHz, T=[-20 C, 85 C], Vcc=[1.8 V, 9 V]",
"ATmega16HVA-4TU: TSSOP28, Fmax=4 MHz, T=[-20 C, 85 C], Vcc=[1.8 V, 9 V]",
"ATmega16HVA-4TUR: TSSOP28, Fmax=4 MHz, T=[-20 C, 85 C], Vcc=[1.8 V, 9 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 51;
n_interrupts = 21;
chip_erase_delay = 4000;
signature = 0x1e 0x94 0x0c;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0f;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
resetdelayus = 70;
hvleavestabdelay = 101;
resetdelay = 26;
chiperasepolltimeout = 40;
chiperasetime = 1;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.0000--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.0000--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.0000--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--00aa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--00aa.aaaa--iiii.iiii";
writepage = "0100.1100--000a.aaaa--aa00.0000--xxxx.xxxx";
;
memory "fuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--1111.11oo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--1111.11ii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega8HVA
#------------------------------------------------------------
part parent "m16hva" # m8hva
desc = "ATmega8HVA";
id = "m8hva";
variants =
"ATmega8HVA: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 4.5 V]",
"ATmega8HVA-4CKU: WFLGA36, Fmax=4 MHz, T=[-20 C, 85 C], Vcc=[1.8 V, 9 V]",
"ATmega8HVA-4CKUR: WFLGA36, Fmax=4 MHz, T=[-20 C, 85 C], Vcc=[1.8 V, 9 V]",
"ATmega8HVA-4TU: TSSOP28, Fmax=4 MHz, T=[-20 C, 85 C], Vcc=[1.8 V, 9 V]",
"ATmega8HVA-4TUR: TSSOP28, Fmax=4 MHz, T=[-20 C, 85 C], Vcc=[1.8 V, 9 V]";
mcuid = 47;
signature = 0x1e 0x93 0x10;
memory "flash"
size = 8192;
num_pages = 64;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
writepage = "0100.1100--0000.aaaa--aa00.0000--xxxx.xxxx";
;
;
#------------------------------------------------------------
# ATmega16HVB
#------------------------------------------------------------
part # m16hvb
desc = "ATmega16HVB";
id = "m16hvb";
variants =
"ATmega16HVB: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[4 V, 18 V]",
"ATmega16HVB-8X3: TFSOP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 25 V]",
"ATmega16HVB-8X3R: TFSOP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 25 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 52;
n_interrupts = 29;
n_boot_sections = 4;
boot_section_size = 512;
chip_erase_delay = 4000;
pagel = 0xa3;
bs2 = 0xa2;
signature = 0x1e 0x94 0x0d;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.000a--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.000a--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.000a--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--00aa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--00aa.aaaa--iiii.iiii";
writepage = "0100.1100--000a.aaaa--aa00.0000--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xdd;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xe9;
bitmask = 0x1f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--111o.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--111i.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--11oo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega16HVBrevB
#------------------------------------------------------------
part parent "m16hvb" # m16hvbrevb
desc = "ATmega16HVBrevB";
id = "m16hvbrevb";
variants =
"ATmega16HVBrevB: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[3.0 V, 4.5 V]";
mcuid = 53;
;
#------------------------------------------------------------
# ATmega32HVB
#------------------------------------------------------------
part parent "m16hvb" # m32hvb
desc = "ATmega32HVB";
id = "m32hvb";
variants =
"ATmega32HVB: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[4 V, 18 V]",
"ATmega32HVB-8X3: TFSOP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 25 V]",
"ATmega32HVB-8X3R: TFSOP44, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[4 V, 25 V]";
mcuid = 60;
signature = 0x1e 0x95 0x10;
memory "eeprom"
size = 1024;
read = "1010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.00aa--aaaa.aaaa--iiii.iiii";
writepage = "1100.0010--0000.00aa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
size = 0x8000;
num_pages = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
writepage = "0100.1100--00aa.aaaa--aa00.0000--xxxx.xxxx";
;
memory "sram"
size = 2048;
;
;
#------------------------------------------------------------
# ATmega32HVBrevB
#------------------------------------------------------------
part parent "m32hvb" # m32hvbrevb
desc = "ATmega32HVBrevB";
id = "m32hvbrevb";
variants =
"ATmega32HVBrevB: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[3.0 V, 4.5 V]";
mcuid = 61;
;
#------------------------------------------------------------
# ATmega64HVE2
#------------------------------------------------------------
part # m64hve2
desc = "ATmega64HVE2";
id = "m64hve2";
variants =
"ATmega64HVE2: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[3.0 V, 3.6 V]",
"ATmega64HVE2-PLPW: VFQFN48, Fmax=15 MHz, T=[-40 C, 125 C], Vcc=[3 V, 3.6 V]",
"ATmega64HVE2-PLQW: VFQFN48, Fmax=15 MHz, T=[-40 C, 125 C], Vcc=[3 V, 3.6 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 77;
n_interrupts = 25;
n_boot_sections = 4;
boot_section_size = 1024;
chip_erase_delay = 4000;
signature = 0x1e 0x96 0x10;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0f;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
resetdelayus = 70;
hvleavestabdelay = 101;
resetdelay = 26;
chiperasepolltimeout = 40;
chiperasetime = 1;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.00aa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.00aa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 128;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--00aa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--00aa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--aa00.0000--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0xd7;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xf9;
bitmask = 0x0f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--1111.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--1111.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--11oo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega32HVE2
#------------------------------------------------------------
part parent "m64hve2" # m32hve2
desc = "ATmega32HVE2";
id = "m32hve2";
variants =
"ATmega32HVE2-PLPW: VFQFN48, Fmax=15 MHz, T=[-40 C, 125 C], Vcc=[3 V, 3.6 V]",
"ATmega32HVE2-PLQW: VFQFN48, Fmax=15 MHz, T=[-40 C, 125 C], Vcc=[3 V, 3.6 V]";
mcuid = 379;
boot_section_size = 512;
signature = 0x1e 0x95 0x13;
memory "flash"
size = 0x8000;
num_pages = 256;
;
;
#------------------------------------------------------------
# ATtiny2313
#------------------------------------------------------------
part # t2313
desc = "ATtiny2313";
id = "t2313";
variants =
"ATtiny2313: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny2313-20MUR: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny2313-20PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny2313-20SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny2313-20SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny2313V-10MU: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313V-10MUR: WQFN20, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313V-10PU: PDIP20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313V-10SU: SOIC20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313V-10SUR: SOIC20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 42;
n_interrupts = 19;
stk500_devcode = 0x23;
# Use the ATtiny26 devcode:
avr910_devcode = 0x5e;
chip_erase_delay = 9000;
pagel = 0xd4;
bs2 = 0xd6;
signature = 0x1e 0x91 0x0a;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x26, 0x36, 0x66, 0x76, 0x2a, 0x3a, 0x6a, 0x7a,
0x2e, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb2, 0x0f, 0x1f;
eeprom_instr =
0xbb, 0xfe, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xba, 0x0f, 0xb2, 0x0f, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x1f;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 0;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.00aa--aaaa.aaaa--oooo.oooo";
# The information in the data sheet of April/2004 is wrong, this works:
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
# The information in the data sheet of April/2004 is wrong, this works:
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
# The information in the data sheet of April/2004 is wrong, this works:
writepage = "0100.1100--0000.00aa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x64;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny2313 has signature bytes 0x1E 0x91 0x0A
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
# The Tiny2313 has calibration data for both 4 MHz and 8 MHz.
# The information in the data sheet of April/2004 is wrong, this works:
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 128;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny2313A
#------------------------------------------------------------
part parent "t2313" # t2313a
desc = "ATtiny2313A";
id = "t2313a";
variants =
"ATtiny2313A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313A-MMH: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313A-MMHR: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313A-MU: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313A-MUR: WQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313A-PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313A-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny2313A-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 43;
n_interrupts = 21;
idr = 0x27;
memory "lfuse"
initval = 0x62;
;
;
#------------------------------------------------------------
# ATtiny4313
#------------------------------------------------------------
part # t4313
desc = "ATtiny4313";
id = "t4313";
variants =
"ATtiny4313: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny4313-MMH: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny4313-MMHR: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny4313-MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny4313-MUR: MLF20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny4313-PU: PDIP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny4313-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny4313-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 44;
n_interrupts = 21;
stk500_devcode = 0x23;
# Use the ATtiny26 devcode:
avr910_devcode = 0x5e;
chip_erase_delay = 9000;
pagel = 0xd4;
bs2 = 0xd6;
signature = 0x1e 0x92 0x0d;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x26, 0x36, 0x66, 0x76, 0x2a, 0x3a, 0x6a, 0x7a,
0x2e, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb2, 0x0f, 0x1f;
eeprom_instr =
0xbb, 0xfe, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xba, 0x0f, 0xb2, 0x0f, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x27;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 0;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny4313 has signature bytes 0x1E 0x92 0x0D
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 256;
offset = 0x60;
;
;
#------------------------------------------------------------
# AT90PWM1
#------------------------------------------------------------
part # pwm1
desc = "AT90PWM1";
id = "pwm1";
variants =
"AT90PWM1: SOIC24, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM1-16MU: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM1-16MUR: QFN32, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM1-16SU: SOIC24, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 166;
n_interrupts = 32;
n_boot_sections = 4;
boot_section_size = 256;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xe2;
signature = 0x1e 0x93 0x83;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.000a--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.000a--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.000a--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--000a.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--000a.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaa0.0000--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf9;
bitmask = 0xb7;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--o1oo.1ooo";
write = "1010.1100--1010.0100--xxxx.xxxx--i1ii.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--11oo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90PWM2
#------------------------------------------------------------
part # pwm2
desc = "AT90PWM2";
id = "pwm2";
variants =
"AT90PWM2: SOIC24, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM2-16SQ: SOIC24, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM2-16SQR: SOIC24, Fmax=N/A, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 167;
n_interrupts = 32;
n_boot_sections = 4;
boot_section_size = 256;
stk500_devcode = 0x65;
chip_erase_delay = 9000;
pagel = 0xd8;
bs2 = 0xe2;
# avr910_devcode = ?;
signature = 0x1e 0x93 0x81;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
spmcr = 0x57;
eecr = 0x3f;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 0x41;
delay = 6;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
readback = 0xff 0xff;
mode = 0x41;
delay = 6;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf9;
bitmask = 0xf7;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# AT90PWM2 has signature bytes 0x1E 0x93 0x81
memory "signature"
size = 3;
read = "0011.0000--00xx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90PWM3
#------------------------------------------------------------
# Completely identical to AT90PWM2 (including the signature!)
part parent "pwm2" # pwm3
desc = "AT90PWM3";
id = "pwm3";
variants =
"AT90PWM3: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM3-16MQ: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM3-16MQT: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 169;
resetdelay = 15;
idr = 0x31;
ocdrev = 1;
memory "eeprom"
readback = 0x00 0x00;
delay = 5;
;
memory "flash"
readback = 0x00 0x00;
delay = 10;
;
memory "io"
size = 224;
offset = 0x20;
;
;
#------------------------------------------------------------
# AT90PWM2B
#------------------------------------------------------------
# Same as AT90PWM2 but different signature.
part parent "pwm2" # pwm2b
desc = "AT90PWM2B";
id = "pwm2b";
variants =
"AT90PWM2B: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM2B-16SU: SOIC24, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM2B-16SUR: SOIC24, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 168;
signature = 0x1e 0x93 0x83;
resetdelay = 15;
idr = 0x31;
ocdrev = 1;
memory "eeprom"
readback = 0x00 0x00;
delay = 5;
;
memory "flash"
readback = 0x00 0x00;
delay = 10;
;
memory "io"
size = 224;
offset = 0x20;
;
;
#------------------------------------------------------------
# AT90PWM3B
#------------------------------------------------------------
# Completely identical to AT90PWM2B (including the signature!)
part parent "pwm2b" # pwm3b
desc = "AT90PWM3B";
id = "pwm3b";
variants =
"AT90PWM3B: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM3B-16MU: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM3B-16MUR: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 170;
;
#------------------------------------------------------------
# AT90PWM161
#------------------------------------------------------------
part # pwm161
desc = "AT90PWM161";
id = "pwm161";
variants =
"AT90PWM161: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM161-16MN: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM161-16MNR: QFN32, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM161-16SN: SOIC20, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM161-16SNR: SOIC20, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 177;
n_interrupts = 20;
n_boot_sections = 4;
boot_section_size = 256;
chip_erase_delay = 9000;
pagel = 0xe2;
bs2 = 0xd6;
signature = 0x1e 0x94 0x8b;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0xc4, 0xe4, 0xc4, 0xe4, 0xcc, 0xec, 0xcc, 0xec,
0xd4, 0xf4, 0xd4, 0xf4, 0xdc, 0xfc, 0xdc, 0xfc,
0xc8, 0xe8, 0xd8, 0xf8, 0x4c, 0x6c, 0x5c, 0x7c,
0xec, 0xbc, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.000a--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.000a--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.000a--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--000a.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--000a.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--00aa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--00aa.aaaa--iiii.iiii";
writepage = "0100.1100--000a.aaaa--aa00.0000--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xfd;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--11oo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90PWM81
#------------------------------------------------------------
part parent "pwm161" # pwm81
desc = "AT90PWM81";
id = "pwm81";
variants =
"AT90PWM81: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM81-16MF: QFN32, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM81-16MN: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM81-16SF: SOIC20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM81-16SN: SOIC20, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM81EP-16MN: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 173;
signature = 0x1e 0x93 0x88;
memory "flash"
size = 8192;
page_size = 64;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--000a.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--000a.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaa0.0000--xxxx.xxxx";
;
memory "sram"
size = 256;
;
;
#------------------------------------------------------------
# AT90PWM316
#------------------------------------------------------------
# Similar to AT90PWM3B, but with 16 kiB flash, 512 B EEPROM, and 1024 B SRAM.
part parent "pwm3b" # pwm316
desc = "AT90PWM316";
id = "pwm316";
variants =
"AT90PWM316: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM316-16MU: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM316-16MUR: QFN32, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 180;
boot_section_size = 512;
signature = 0x1e 0x94 0x83;
memory "flash"
size = 0x4000;
page_size = 128;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--00xx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "sram"
size = 1024;
;
;
#------------------------------------------------------------
# AT90PWM216
#------------------------------------------------------------
# Completely identical to AT90PWM316 (including the signature!)
part parent "pwm316" # pwm216
desc = "AT90PWM216";
id = "pwm216";
variants =
"AT90PWM216: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90PWM216-16SU: SOIC24, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"AT90PWM216-16SUR: SOIC24, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 179;
;
#------------------------------------------------------------
# ATtiny25
#------------------------------------------------------------
part # t25
desc = "ATtiny25";
id = "t25";
variants =
"ATtiny25: N/A, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[N/A, N/A]",
"ATtiny25-15ST: SOIC8, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20MF: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20MFR: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20MUR: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20PU: PDIP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SN: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SNR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SSH: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SSHR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SSN: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SSNR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SSU: SOIC8N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SSUR: SOIC8N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SU: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25-20SUR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-10MF: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10MFR: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10MU: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10MUR: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10PU: PDIP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SH: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SN: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SNR: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SSH: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SSHR: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SSN: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SSNR: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SSU: SOIC8N, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SSUR: SOIC8N, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SU: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-10SUR: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny25V-20MF: MLF20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-20PU: PDIP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-20SH: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-20SN: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-20SSH: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-20SSN: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-20SSU: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny25V-20SU: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 16;
n_interrupts = 15;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x91 0x08;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
flash_instr = 0xb4, 0x02, 0x12;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x02, 0xb4, 0x02, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
idr = 0x22;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.00aa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--0000.00aa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny25 has signature bytes 0x1E 0x91 0x08
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 128;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny45
#------------------------------------------------------------
part # t45
desc = "ATtiny45";
id = "t45";
variants =
"ATtiny45: N/A, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[N/A, N/A]",
"ATtiny45-15SZ: SOIC8, Fmax=N/A, T=[-40 C, 85 C], Vcc=[N/A, N/A]",
"ATtiny45-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45-20MUR: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45-20PU: PDIP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45-20SU: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45-20SUR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45-20XU: TSSOP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45-20XUR: TSSOP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45V-10MU: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny45V-10MUR: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny45V-10PU: PDIP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny45V-10SH: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny45V-10SU: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny45V-10SUR: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny45V-10XU: TSSOP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny45V-10XUR: TSSOP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny45V-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45V-20PU: PDIP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45V-20SH: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45V-20SU: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny45V-20XU: TSSOP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 22;
n_interrupts = 15;
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x92 0x06;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
flash_instr = 0xb4, 0x02, 0x12;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x02, 0xb4, 0x02, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
idr = 0x22;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny45 has signature bytes 0x1E 0x92 0x08 (data sheet 2586C-AVR-06/05 doc2586.pdf indicates otherwise)
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 256;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny85
#------------------------------------------------------------
part # t85
desc = "ATtiny85";
id = "t85";
variants =
"ATtiny85: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[N/A, N/A]",
"ATtiny85-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85-20MUR: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85-20PU: PDIP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85-20SF: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny85-20SFR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85-20SU: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85-20SUR: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85V-10MU: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny85V-10MUR: MLF20, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny85V-10PU: PDIP8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny85V-10SH: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny85V-10SU: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny85V-10SUR: SOIC8, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny85V-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85V-20PU: PDIP8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85V-20SH: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny85V-20SU: SOIC8, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 26;
n_interrupts = 15;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x93 0x0b;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x00;
flash_instr = 0xb4, 0x02, 0x12;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x02, 0xb4, 0x02, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 25;
resetdelayms = 1;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
idr = 0x22;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 5;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
# ATtiny85 has signature bytes 0x1E 0x93 0x08
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 2;
read = "0011.1000--000x.xxxx--0000.000a--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega640
#------------------------------------------------------------
# Almost same as ATmega1280, except for different memory sizes
part # m640
desc = "ATmega640";
id = "m640";
variants =
"ATmega640: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega640-16AU: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega640-16AUR: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega640-16CU: CBGA100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega640V-8AU: TQFP100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega640V-8AUR: TQFP100, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega640V-8CU: CBGA100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega640V-8CUR: TFBGA100, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 126;
n_interrupts = 57;
n_boot_sections = 4;
boot_section_size = 1024;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x08;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 480;
offset = 0x20;
;
memory "sram"
size = 8192;
offset = 0x200;
;
;
#------------------------------------------------------------
# ATmega1280
#------------------------------------------------------------
part # m1280
desc = "ATmega1280";
id = "m1280";
variants =
"ATmega1280: TQFP100, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega1280-16AU: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega1280-16AUR: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega1280-16CU: CBGA100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega1280V-8AU: TQFP100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1280V-8AUR: TQFP100, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega1280V-8CU: CBGA100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 138;
n_interrupts = 57;
n_boot_sections = 4;
boot_section_size = 1024;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x97 0x03;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 480;
offset = 0x20;
;
memory "sram"
size = 8192;
offset = 0x200;
;
;
#------------------------------------------------------------
# ATmega1281
#------------------------------------------------------------
# Identical to ATmega1280
part parent "m1280" # m1281
desc = "ATmega1281";
id = "m1281";
variants =
"ATmega1281: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega1281-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega1281-16AUR: TQFP64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega1281-16MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega1281-16MUR: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega1281V-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1281V-8AUR: QFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1281V-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1281V-8MUR: MLF64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 139;
signature = 0x1e 0x97 0x04;
;
#------------------------------------------------------------
# ATmega2560
#------------------------------------------------------------
part # m2560
desc = "ATmega2560";
id = "m2560";
variants =
"ATmega2560: TQFP100, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega2560-16AU: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega2560-16AUR: TQFP100, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega2560-16CU: CBGA100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega2560V-8AU: TQFP100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega2560V-8AUR: TQFP100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega2560V-8CU: CBGA100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 143;
n_interrupts = 57;
n_boot_sections = 4;
boot_section_size = 1024;
stk500_devcode = 0xb2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x98 0x01;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x02;
hventerstabdelay = 100;
latchcycles = 6;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
eecr = 0x3f;
eind = 0x5c;
ocdrev = 4;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x40000;
page_size = 256;
num_pages = 1024;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
load_ext_addr = "0100.1101--0000.0000--0000.000a--0000.0000";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 480;
offset = 0x20;
;
memory "sram"
size = 8192;
offset = 0x200;
;
;
#------------------------------------------------------------
# ATmega2561
#------------------------------------------------------------
part parent "m2560" # m2561
desc = "ATmega2561";
id = "m2561";
variants =
"ATmega2561: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega2561-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega2561-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega2561-16MU: MLF64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[4.5 V, 5.5 V]",
"ATmega2561-16MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[4.5 V, 5.5 V]",
"ATmega2561V-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega2561V-8AUR: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega2561V-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega2561V-8MUR: VQFN64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 144;
signature = 0x1e 0x98 0x02;
;
#------------------------------------------------------------
# ATmega128RFA1
#------------------------------------------------------------
# Identical to ATmega2561 but half the ROM
part parent "m2561" # m128rfa1
desc = "ATmega128RFA1";
id = "m128rfa1";
variants =
"ATmega128RFA1: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFA1-ZF: VFQFN64, Fmax=N/A, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFA1-ZFR: VFQFN64, Fmax=N/A, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFA1-ZU: VFQFN64, Fmax=N/A, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFA1-ZU00: VFQFN64, Fmax=N/A, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFA1-ZUR: VFQFN64, Fmax=N/A, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFA1-ZUR-SL514: VFQFN64, Fmax=N/A, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFA1-ZUR00: VFQFN64, Fmax=N/A, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]";
mcuid = 87;
n_interrupts = 72;
chip_erase_delay = 18500;
bs2 = 0xe2;
signature = 0x1e 0xa7 0x01;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
latchcycles = 5;
ocdrev = 3;
memory "eeprom"
min_write_delay = 13000;
max_write_delay = 13000;
delay = 50;
;
memory "flash"
size = 0x20000;
num_pages = 512;
delay = 50;
load_ext_addr = NULL;
;
memory "lfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "hfuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "efuse"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "lock"
min_write_delay = 4500;
max_write_delay = 4500;
;
memory "sram"
size = 0x4000;
;
;
#------------------------------------------------------------
# ATmega256RFR2
#------------------------------------------------------------
part parent "m128rfa1" # m256rfr2
desc = "ATmega256RFR2";
id = "m256rfr2";
variants =
"ATmega256RFR2-ZF: VFQFN64, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega256RFR2-ZFR: VFQFN64, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega256RFR2-ZU: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega256RFR2-ZUR: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]";
mcuid = 108;
n_interrupts = 77;
signature = 0x1e 0xa8 0x02;
chiperasepolltimeout = 20;
ocdrev = 4;
memory "eeprom"
size = 8192;
read = "1010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxa.aaaa--aaaa.aaaa--iiii.iiii";
writepage = "1100.0010--00xa.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
size = 0x40000;
num_pages = 1024;
load_ext_addr = "0100.1101--0000.0000--0000.000a--0000.0000";
;
memory "efuse"
initval = 0xfe;
;
#####
# Three separate flash pages
# - Offset 0x100 in signature row
# - Only programmable with JTAG or HVPP
# - Readable from an application
# - Cannot be read using ISP
# - Not erased by chip erase
#
memory "usersig"
paged = yes;
size = 768;
page_size = 256;
num_pages = 3;
offset = 0x100;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 50;
blocksize = 256;
readsize = 256;
;
memory "sram"
size = 0x8000;
;
;
#------------------------------------------------------------
# ATmega128RFR2
#------------------------------------------------------------
part parent "m256rfr2" # m128rfr2
desc = "ATmega128RFR2";
id = "m128rfr2";
variants =
"ATmega128RFR2-ZF: VFQFN64, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFR2-ZFR: VFQFN64, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFR2-ZU: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega128RFR2-ZUR: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]";
mcuid = 88;
signature = 0x1e 0xa7 0x02;
ocdrev = 3;
memory "eeprom"
size = 4096;
;
memory "flash"
size = 0x20000;
num_pages = 512;
load_ext_addr = NULL;
;
memory "sram"
size = 0x4000;
;
;
#------------------------------------------------------------
# ATmega64RFR2
#------------------------------------------------------------
part parent "m128rfr2" # m64rfr2
desc = "ATmega64RFR2";
id = "m64rfr2";
variants =
"ATmega64RFR2-ZF: VFQFN64, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega64RFR2-ZFR: VFQFN64, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega64RFR2-ZU: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega64RFR2-ZUR: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]";
mcuid = 78;
signature = 0x1e 0xa6 0x02;
memory "eeprom"
size = 2048;
read = "1010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
size = 0x10000;
num_pages = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
writepage = "0100.1100--0aaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "sram"
size = 8192;
;
;
#------------------------------------------------------------
# ATmega2564RFR2
#------------------------------------------------------------
part parent "m256rfr2" # m2564rfr2
desc = "ATmega2564RFR2";
id = "m2564rfr2";
variants =
"ATmega2564RFR2-ZF: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega2564RFR2-ZFR: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega2564RFR2-ZU: VFQFN48, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega2564RFR2-ZUR: VFQFN48, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]";
mcuid = 145;
signature = 0x1e 0xa8 0x03;
;
#------------------------------------------------------------
# ATmega1284RFR2
#------------------------------------------------------------
part parent "m128rfr2" # m1284rfr2
desc = "ATmega1284RFR2";
id = "m1284rfr2";
variants =
"ATmega1284RFR2-ZF: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega1284RFR2-ZFR: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega1284RFR2-ZU: VFQFN48, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega1284RFR2-ZUR: VFQFN48, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]";
mcuid = 142;
signature = 0x1e 0xa7 0x03;
;
#------------------------------------------------------------
# ATmega644RFR2
#------------------------------------------------------------
part parent "m64rfr2" # m644rfr2
desc = "ATmega644RFR2";
id = "m644rfr2";
variants =
"ATmega644RFR2-ZF: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega644RFR2-ZFR: VFQFN48, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 3.6 V]",
"ATmega644RFR2-ZU: VFQFN48, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]",
"ATmega644RFR2-ZUR: VFQFN48, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 3.6 V]";
mcuid = 131;
signature = 0x1e 0xa6 0x03;
;
#------------------------------------------------------------
# ATtiny24
#------------------------------------------------------------
part # t24
desc = "ATtiny24";
id = "t24";
variants =
"ATtiny24: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24-20MU: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny24-20MUR: WQFN20, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny24-20PU: PDIP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny24-20SSU: SOIC14N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny24-20SSUR: SOIC14N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny24V-10MU: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24V-10MUR: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24V-10PU: PDIP14, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24V-10SSU: SOIC14N, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24V-10SSUR: SOIC14N, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 14;
n_interrupts = 17;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x91 0x0b;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0f;
flash_instr = 0xb4, 0x07, 0x17;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x07, 0xb4, 0x07, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 50;
resetdelayus = 3;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
hvspcmdexedelay = 50;
idr = 0x27;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 128;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--xaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--xaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 2048;
page_size = 32;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.00aa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--0000.00aa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny24 has signature bytes 0x1E 0x91 0x0B
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 128;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny24A
#------------------------------------------------------------
part parent "t24" # t24a
desc = "ATtiny24A";
id = "t24a";
variants =
"ATtiny24A: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-CCU: UFBGA15, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-CCUR: UFBGA15, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-MF: QFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-MFR: QFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-MM8: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-MM8R: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-MMH: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-MMHR: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-MU: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-MUR: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-PU: PDIP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-SSU: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny24A-SSUR: SOIC14N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 15;
;
#------------------------------------------------------------
# ATtiny44
#------------------------------------------------------------
part # t44
desc = "ATtiny44";
id = "t44";
variants =
"ATtiny44: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44-20MU: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny44-20MUR: WQFN20, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny44-20PU: PDIP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny44-20SSU: SOIC14N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny44-20SSUR: SOIC14N, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny44V-10MU: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44V-10MUR: WQFN20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44V-10PU: PDIP14, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44V-10SSU: SOIC14N, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44V-10SSUR: SOIC14N, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 20;
n_interrupts = 17;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x92 0x07;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0f;
flash_instr = 0xb4, 0x07, 0x17;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x07, 0xb4, 0x07, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 50;
resetdelayus = 3;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
hvspcmdexedelay = 50;
idr = 0x27;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny44 has signature bytes 0x1E 0x92 0x07
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 256;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny44A
#------------------------------------------------------------
part parent "t44" # t44a
desc = "ATtiny44A";
id = "t44a";
variants =
"ATtiny44A: N/A, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-CCU: UFBGA15, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-CCUR: UFBGA15, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-MF: QFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-MFR: QFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-MMH: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-MMHR: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-MU: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-MUR: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-PU: PDIP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-SSU: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny44A-SSUR: SOIC14N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = XVII + IV; # 21;
;
#------------------------------------------------------------
# ATtiny84
#------------------------------------------------------------
part # t84
desc = "ATtiny84";
id = "t84";
variants =
"ATtiny84: N/A, Fmax=20 MHz, T=[N/A, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84-15MZ: MLF20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny84-20MU: MLF20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny84-20MUR: WQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny84-20PU: PDIP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny84-20SSU: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny84-20SSUR: SOIC14N, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny84V-10MU: MLF20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84V-10MUR: WQFN20, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84V-10PU: PDIP14, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84V-10SSU: SOIC14, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84V-10SSUR: SOIC14, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVSP | PM_debugWIRE;
mcuid = 24;
n_interrupts = 17;
# no STK500 devcode in XML file, use the ATtiny45 one
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 4500;
signature = 0x1e 0x93 0x0c;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
hvsp_controlstack =
0x4c, 0x0c, 0x1c, 0x2c, 0x3c, 0x64, 0x74, 0x66,
0x68, 0x78, 0x68, 0x68, 0x7a, 0x6a, 0x68, 0x78,
0x78, 0x7d, 0x6d, 0x0c, 0x80, 0x40, 0x20, 0x10,
0x11, 0x08, 0x04, 0x02, 0x03, 0x08, 0x04, 0x0f;
flash_instr = 0xb4, 0x07, 0x17;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x07, 0xb4, 0x07, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 1;
togglevtg = 1;
poweroffdelay = 50;
resetdelayus = 3;
hvleavestabdelay = 100;
resetdelay = 25;
chiperasepolltimeout = 40;
programfusepolltimeout = 25;
programlockpolltimeout = 25;
synchcycles = 6;
hvspcmdexedelay = 50;
idr = 0x27;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 64;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--xxxx.xxii";
;
# ATtiny84 has signature bytes 0x1E 0x93 0x0C
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATtiny84A
#------------------------------------------------------------
part parent "t84" # t84a
desc = "ATtiny84A";
id = "t84a";
variants =
"ATtiny84A-CCU: UFBGA15, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-CCUR: UFBGA15, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-MF: WQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-MFR: WQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-MMH: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-MMHR: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-MU: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-MUR: QFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-PU: PDIP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-SSU: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny84A-SSUR: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 25;
;
#------------------------------------------------------------
# ATtiny441
#------------------------------------------------------------
part parent "t44" # t441
desc = "ATtiny441";
id = "t441";
variants =
"ATtiny441-MMH: VQFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny441-MMHR: VQFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny441-MU: QFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny441-MUR: QFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny441-SSU: SOIC14, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny441-SSUR: SOIC14, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]";
mcuid = 32;
n_interrupts = 30;
n_page_erase = 4;
signature = 0x1e 0x92 0x15;
poweroffdelay = 25;
resetdelayms = 1;
resetdelayus = 0;
hvspcmdexedelay = 0;
memory "flash"
page_size = 16;
num_pages = 256;
blocksize = 16;
loadpage_lo = "0100.0000--000x.xxxx--xxxx.xaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.xaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaaa.axxx--xxxx.xxxx";
;
memory "lfuse"
bitmask = 0xdf;
;
memory "efuse"
bitmask = 0xff;
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "io"
size = 224;
;
memory "sram"
offset = 0x100;
;
;
#------------------------------------------------------------
# ATtiny841
#------------------------------------------------------------
part parent "t84" # t841
desc = "ATtiny841";
id = "t841";
variants =
"ATtiny841-MMH: VQFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny841-MMHR: VQFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny841-MU: QFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny841-MUR: QFN20, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny841-SSU: SOIC14, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]",
"ATtiny841-SSUR: SOIC14, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.7 V, 5.5 V]";
mcuid = 37;
n_interrupts = 30;
n_page_erase = 4;
signature = 0x1e 0x93 0x15;
poweroffdelay = 25;
resetdelayms = 1;
resetdelayus = 0;
hvspcmdexedelay = 0;
memory "flash"
page_size = 16;
num_pages = 512;
blocksize = 16;
loadpage_lo = "0100.0000--000x.xxxx--xxxx.xaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.xaaa--iiii.iiii";
writepage = "0100.1100--0000.aaaa--aaaa.axxx--xxxx.xxxx";
;
memory "lfuse"
bitmask = 0xdf;
;
memory "efuse"
bitmask = 0xff;
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "io"
size = 224;
;
memory "sram"
offset = 0x100;
;
;
#------------------------------------------------------------
# ATtiny43U
#------------------------------------------------------------
part # t43u
desc = "ATtiny43U";
id = "t43u";
variants =
"ATtiny43U: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[0.7 V, 5.5 V]",
"ATtiny43U-MU: QFN20, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny43U-MUR: WQFN20, Fmax=8 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATtiny43U-SU: SOIC20, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny43U-SUR: SOIC20, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 19;
n_interrupts = 16;
stk500_devcode = 0x14;
# avr910_devcode = ?;
# Try the AT90S2313 devcode:
avr910_devcode = 0x20;
chip_erase_delay = 1000;
pagel = 0xa3;
bs2 = 0xa2;
signature = 0x1e 0x92 0x0c;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pp_controlstack =
0x0e, 0x1e, 0x0e, 0x1e, 0x2e, 0x3e, 0x2e, 0x3e,
0x4e, 0x5e, 0x4e, 0x5e, 0x6e, 0x7e, 0x6e, 0x7e,
0x06, 0x16, 0x46, 0x56, 0x0a, 0x1a, 0x4a, 0x5a,
0x1e, 0x7c, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb4, 0x07, 0x17;
eeprom_instr =
0xbb, 0xff, 0xbb, 0xee, 0xbb, 0xcc, 0xb2, 0x0d,
0xbc, 0x07, 0xb4, 0x07, 0xba, 0x0d, 0xbb, 0xbc,
0x99, 0xe1, 0xbb, 0xac;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 20;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x27;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 64;
page_size = 4;
num_pages = 16;
min_write_delay = 4000;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxx--00aa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxx--00aa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxx--00aa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 4096;
page_size = 64;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 64;
readsize = 256;
read_lo = "0010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0000.0aaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxa.aaaa--iiii.iiii";
writepage = "0100.1100--0000.0aaa--aaax.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x01;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.xxxi";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 64;
offset = 0x20;
;
memory "sram"
size = 256;
offset = 0x60;
;
;
#------------------------------------------------------------
# ATmega16u4
#------------------------------------------------------------
part # m16u4
desc = "ATmega16U4";
id = "m16u4";
variants =
"ATmega16U4-AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16U4-AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16U4-MU: QFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16U4-MUR: VQFN44, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega16U4RC-AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16U4RC-MU: QFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 57;
n_interrupts = 43;
n_boot_sections = 4;
boot_section_size = 512;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x88;
usbpid = 0x2ff4;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x52;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xfb;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--00oo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1280;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega32u4
#------------------------------------------------------------
part # m32u4
desc = "ATmega32U4";
id = "m32u4";
variants =
"ATmega32U4-AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U4-AUR: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U4-MU: QFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U4-MUR: QFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U4RC-AU: TQFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U4RC-AUR: QFP44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U4RC-MU: QFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U4RC-MUR: QFN44, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 65;
n_interrupts = 43;
n_boot_sections = 4;
boot_section_size = 512;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x87;
usbpid = 0x2ff4;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x52;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xfb;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--1111.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--xxxx.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 2560;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90USB646
#------------------------------------------------------------
part # usb646
desc = "AT90USB646";
id = "usb646";
variants =
"AT90USB646: QFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90USB646-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB646-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB646-MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB646-MUR: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 181;
n_interrupts = 38;
n_boot_sections = 4;
boot_section_size = 1024;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x82;
usbpid = 0x2ff9;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.xaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.xaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.xaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x5e;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x9b;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf3;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90USB647
#------------------------------------------------------------
# identical to AT90USB646
part parent "usb646" # usb647
desc = "AT90USB647";
id = "usb647";
variants =
"AT90USB647: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90USB647-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB647-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB647-MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB647-MUR: QFN64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 182;
;
#------------------------------------------------------------
# AT90USB1286
#------------------------------------------------------------
part # usb1286
desc = "AT90USB1286";
id = "usb1286";
variants =
"AT90USB1286: QFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90USB1286-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB1286-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB1286-MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB1286-MUR: QFN64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 184;
n_interrupts = 38;
n_boot_sections = 4;
boot_section_size = 1024;
# stk500_devcode = 0xB2;
# avr910_devcode = 0x43;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x97 0x82;
usbpid = 0x2ffb;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
rampz = 0x3b;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 4096;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 8;
readsize = 256;
read = "1010.0000--xxxx.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--xxxx.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--00xx.aaaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x20000;
page_size = 256;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 256;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--axxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x5e;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf3;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--xxxx.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 8192;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90USB1287
#------------------------------------------------------------
# identical to AT90USB1286
part parent "usb1286" # usb1287
desc = "AT90USB1287";
id = "usb1287";
variants =
"AT90USB1287: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90USB1287-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB1287-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB1287-MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB1287-MUR: VQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 185;
;
#------------------------------------------------------------
# AT90USB162
#------------------------------------------------------------
part # usb162
desc = "AT90USB162";
id = "usb162";
variants =
"AT90USB162: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90USB162-16AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB162-16AUR: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB162-16MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB162-16MUR: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 178;
n_interrupts = 29;
n_boot_sections = 4;
boot_section_size = 512;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x94 0x82;
usbpid = 0x2ffa;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x5e;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf4;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# AT90USB82
#------------------------------------------------------------
part # usb82
desc = "AT90USB82";
id = "usb82";
variants =
"AT90USB82: QFN32, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"AT90USB82-16MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"AT90USB82-16MUR: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 174;
n_interrupts = 29;
n_boot_sections = 4;
boot_section_size = 512;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x93 0x82;
usbpid = 0x2ff7;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 128;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x5e;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf4;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega32U2
#------------------------------------------------------------
part # m32u2
desc = "ATmega32U2";
id = "m32u2";
variants =
"ATmega32U2-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U2-AUR: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U2-MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega32U2-MUR: VQFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 64;
n_interrupts = 29;
n_boot_sections = 4;
boot_section_size = 512;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x95 0x8a;
usbpid = 0x2ff0;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 1024;
page_size = 4;
num_pages = 256;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x5e;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf4;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega16U2
#------------------------------------------------------------
part # m16u2
desc = "ATmega16U2";
id = "m16u2";
variants =
"ATmega16U2-AU: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16U2-AUR: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16U2-MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega16U2-MUR: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 56;
n_interrupts = 29;
n_boot_sections = 4;
boot_section_size = 512;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x94 0x89;
usbpid = 0x2fef;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x5e;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf4;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega8U2
#------------------------------------------------------------
part # m8u2
desc = "ATmega8U2";
id = "m8u2";
variants =
"ATmega8U2-AU: LQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8U2-AUR: TQFP32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8U2-MU: QFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega8U2-MUR: VQFN32, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 48;
n_interrupts = 29;
n_boot_sections = 4;
boot_section_size = 512;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xc6;
signature = 0x1e 0x93 0x89;
usbpid = 0x2fee;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.aaaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.aaaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.aaaa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 8192;
page_size = 128;
num_pages = 64;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 6;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--xxxx.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x5e;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xd9;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xf4;
bitmask = 0x0f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--iiii.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 512;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega165P
#------------------------------------------------------------
part # m165p
desc = "ATmega165P";
id = "m165p";
variants =
"ATmega165P: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega165P-16AN: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATmega165P-16ANR: TQFP64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega165P-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega165P-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega165P-16MN: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega165P-16MNR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega165P-16MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega165P-16MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega165PV-8AN: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165PV-8ANR: TQFP64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega165PV-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165PV-8AUR: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165PV-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165PV-8MUR: QFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 97;
n_interrupts = 22;
n_boot_sections = 4;
boot_section_size = 256;
# stk500_devcode = 0x??;
# avr910_devcode = 0x??;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x94 0x07;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.00xa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.00xa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.00xa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 128;
num_pages = 128;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--xxxa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.xxxx--xxaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.xxxx--xxaa.aaaa--iiii.iiii";
writepage = "0100.1100--xxxa.aaaa--aaxx.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x0f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxx.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--0000.0000--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--xxxx.xxxx--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega165A
#------------------------------------------------------------
part parent "m165p" # m165a
desc = "ATmega165A";
id = "m165a";
variants =
"ATmega165A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega165A-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165A-AUR: TQFP64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega165A-MU: MLF64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165A-MUR: TQFP64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 96;
signature = 0x1e 0x94 0x10;
;
#------------------------------------------------------------
# ATmega165
#------------------------------------------------------------
part parent "m165p" # m165
desc = "ATmega165";
id = "m165";
variants =
"ATmega165: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATmega165-16AI: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega165-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega165-16MI: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega165-16MU: VFQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega165V-8AI: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165V-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165V-8MI: VFQFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165V-8MU: VFQFN64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 95;
memory "eeprom"
min_write_delay = 9000;
max_write_delay = 9000;
;
;
#------------------------------------------------------------
# ATmega165PA
#------------------------------------------------------------
part parent "m165p" # m165pa
desc = "ATmega165PA";
id = "m165pa";
variants =
"ATmega165PA: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega165PA-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165PA-AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165PA-MN: TQFP64, Fmax=16 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega165PA-MNR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega165PA-MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 98;
;
#------------------------------------------------------------
# ATmega325
#------------------------------------------------------------
part # m325
desc = "ATmega325";
id = "m325";
variants =
"ATmega325: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega325-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega325-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega325-16MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega325-16MUR: VQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega325V-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325V-8AUR: TQFP64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega325V-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325V-8MUR: VQFN64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 114;
n_interrupts = 22;
n_boot_sections = 4;
boot_section_size = 512;
# stk500_devcode = 0x??; # No STK500v1 support?
# avr910_devcode = 0x??; # Try the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x05;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--0000.0000--0000.0000";
pgm_enable = "1010.1100--0101.0011--0000.0000--0000.0000";
memory "eeprom"
size = 1024;
page_size = 4;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.00aa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.00aa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--0000.00aa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x8000;
page_size = 128;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--0aaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--aaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--aaaa.aaaa--iiii.iiii";
writepage = "0100.1100--0aaa.aaaa--aaaa.aaaa--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--1010.0000--0000.0000--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--0000.0000--oooo.oooo";
write = "1010.1100--1010.1000--0000.0000--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--0000.0000--oooo.oooo";
write = "1010.1100--1010.0100--0000.0000--1111.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1110.0000--0000.0000--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--0000.0000--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 2048;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega325A
#------------------------------------------------------------
part parent "m325" # m325a
desc = "ATmega325A";
id = "m325a";
variants =
"ATmega325A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega325A-AN: TQFP64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325A-ANR: TQFP64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325A-AU: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325A-AUR: TQFP64, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega325A-MN: VQFN64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325A-MNR: VQFN64, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325A-MU: QFN64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325A-MUR: VQFN64, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 115;
;
#------------------------------------------------------------
# ATmega325P
#------------------------------------------------------------
part parent "m325" # m325p
desc = "ATmega325P";
id = "m325p";
variants =
"ATmega325P: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega325P-20AU: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega325P-20AUR: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega325P-20MU: MLF64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega325PV-10AU: TQFP64, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325PV-10AUR: TQFP64, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325PV-10MU: MLF64, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325PV-10MUR: VQFN64, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 116;
signature = 0x1e 0x95 0x0d;
;
#------------------------------------------------------------
# ATmega325PA
#------------------------------------------------------------
part parent "m325" # m325pa
desc = "ATmega325PA";
id = "m325pa";
variants =
"ATmega325PA: N/A, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega325PA-AU: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325PA-AUR: TQFP64, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega325PA-MU: VQFN64, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega325PA-MUR: VQFN64, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 117;
signature = 0x1e 0x95 0x0d;
;
#------------------------------------------------------------
# ATmega645
#------------------------------------------------------------
part # m645
desc = "ATmega645";
id = "m645";
variants =
"ATmega645: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega645-16AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega645-16AUR: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega645-16MU: MLF64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega645-16MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega645V-8AU: TQFP64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega645V-8AUR: TQFP64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega645V-8MU: MLF64, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega645V-8MUR: VQFN64, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_JTAG;
mcuid = 132;
n_interrupts = 22;
n_boot_sections = 4;
boot_section_size = 1024;
# stk500_devcode = 0x??; # No STK500v1 support?
# avr910_devcode = 0x??; # Try the ATmega16 one
avr910_devcode = 0x74;
chip_erase_delay = 9000;
pagel = 0xd7;
bs2 = 0xa0;
signature = 0x1e 0x96 0x05;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
chip_erase = "1010.1100--1000.0000--0000.0000--0000.0000";
pgm_enable = "1010.1100--0101.0011--0000.0000--0000.0000";
memory "eeprom"
size = 2048;
page_size = 8;
min_write_delay = 9000;
max_write_delay = 9000;
mode = 0x41;
delay = 10;
blocksize = 4;
readsize = 256;
read = "1010.0000--0000.0aaa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--0000.0aaa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.0aaa--iiii.iiii";
writepage = "1100.0010--0000.0aaa--aaaa.a000--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x10000;
page_size = 256;
num_pages = 256;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 128;
readsize = 256;
read_lo = "0010.0000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--aaaa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--0000.0000--aaaa.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--0000.0000--aaaa.aaaa--iiii.iiii";
writepage = "0100.1100--aaaa.aaaa--aaaa.aaaa--0000.0000";
;
memory "lfuse"
size = 1;
initval = 0x62;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.0000--0000.0000--oooo.oooo";
write = "1010.1100--1010.0000--0000.0000--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0x99;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.1000--0000.0000--oooo.oooo";
write = "1010.1100--1010.1000--0000.0000--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x07;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.0000--0000.1000--0000.0000--oooo.oooo";
write = "1010.1100--1010.0100--0000.0000--1111.1iii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x3f;
min_write_delay = 9000;
max_write_delay = 9000;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1110.0000--0000.0000--11ii.iiii";
;
memory "signature"
size = 3;
read = "0011.0000--0000.0000--0000.00aa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--0000.0000--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 4096;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATmega645A
#------------------------------------------------------------
part parent "m645" # m645a
desc = "ATmega645A";
id = "m645a";
variants =
"ATmega645A: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega645A-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega645A-AUR: TQFP64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega645A-MU: VQFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega645A-MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 133;
;
#------------------------------------------------------------
# ATmega645P
#------------------------------------------------------------
part parent "m645" # m645p
desc = "ATmega645P";
id = "m645p";
variants =
"ATmega645P: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega645P-AU: TQFP64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega645P-AUR: TQFP64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega645P-MU: QFN64, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega645P-MUR: VQFN64, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 134;
signature = 0x1e 0x96 0x0d;
;
#------------------------------------------------------------
# ATmega3250
#------------------------------------------------------------
part parent "m325" # m3250
desc = "ATmega3250";
id = "m3250";
variants =
"ATmega3250: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega3250-16AU: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega3250-16AUR: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega3250V-8AU: TQFP100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3250V-8AUR: TQFP100, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 146;
n_interrupts = 25;
signature = 0x1e 0x95 0x06;
;
#------------------------------------------------------------
# ATmega3250A
#------------------------------------------------------------
part parent "m325" # m3250a
desc = "ATmega3250A";
id = "m3250a";
variants =
"ATmega3250A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega3250A-AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3250A-AUR: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 147;
n_interrupts = 25;
signature = 0x1e 0x95 0x06;
;
#------------------------------------------------------------
# ATmega3250P
#------------------------------------------------------------
part parent "m325" # m3250p
desc = "ATmega3250P";
id = "m3250p";
variants =
"ATmega3250P: TQFP100, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega3250P-20AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega3250P-20AUR: TQFP100, Fmax=20 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega3250PV-10AU: TQFP100, Fmax=10 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3250PV-10AUR: TQFP100, Fmax=10 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 148;
n_interrupts = 25;
signature = 0x1e 0x95 0x0e;
;
#------------------------------------------------------------
# ATmega3250PA
#------------------------------------------------------------
part parent "m325" # m3250pa
desc = "ATmega3250PA";
id = "m3250pa";
variants =
"ATmega3250PA: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega3250PA-AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3250PA-AUR: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 149;
n_interrupts = 25;
signature = 0x1e 0x95 0x0e;
;
#------------------------------------------------------------
# ATmega6450
#------------------------------------------------------------
part parent "m645" # m6450
desc = "ATmega6450";
id = "m6450";
variants =
"ATmega6450: N/A, Fmax=16 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega6450-16AU: TQFP100, Fmax=16 MHz, T=[-40 C, 85 C], Vcc=[2.7 V, 5.5 V]",
"ATmega6450-16AUR: TQFP100, Fmax=16 MHz, T=[N/A, N/A], Vcc=[2.7 V, 5.5 V]",
"ATmega6450V-8AU: TQFP100, Fmax=8 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega6450V-8AUR: TQFP100, Fmax=8 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 154;
n_interrupts = 25;
signature = 0x1e 0x96 0x06;
;
#------------------------------------------------------------
# ATmega6450A
#------------------------------------------------------------
part parent "m645" # m6450a
desc = "ATmega6450A";
id = "m6450a";
variants =
"ATmega6450A: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega6450A-AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega6450A-AUR: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 155;
n_interrupts = 25;
signature = 0x1e 0x96 0x06;
;
#------------------------------------------------------------
# ATmega6450P
#------------------------------------------------------------
part parent "m645" # m6450p
desc = "ATmega6450P";
id = "m6450p";
variants =
"ATmega6450P: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATmega6450P-AU: TQFP100, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega6450P-AUR: TQFP100, Fmax=20 MHz, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 156;
n_interrupts = 25;
signature = 0x1e 0x96 0x0e;
;
#------------------------------------------------------------
# AVR XMEGA family common values
#------------------------------------------------------------
part # .xmega
desc = "AVR XMEGA family common values";
id = ".xmega";
prog_modes = PM_SPM | PM_PDI;
n_boot_sections = 1;
mcu_base = 0x0090;
nvm_base = 0x01c0;
autobaud_sync = 0x20;
factory_fcpu = 2000000;
memory "fuse1"
size = 1;
initval = 0x00;
offset = 0x8f0021;
;
memory "fuse2"
size = 1;
initval = 0xff;
bitmask = 0x63;
offset = 0x8f0022;
;
memory "fuse4"
size = 1;
initval = 0xff;
bitmask = 0x1e;
offset = 0x8f0024;
;
memory "fuse5"
size = 1;
initval = 0xff;
bitmask = 0x3f;
offset = 0x8f0025;
;
memory "lock"
size = 1;
initval = 0xff;
offset = 0x8f0027;
;
memory "prodsig"
size = 50;
offset = 0x8e0200;
readsize = 50;
;
memory "sigrow"
alias "prodsig";
;
memory "signature"
size = 3;
offset = 0x1000090;
;
memory "io"
size = 4096;
readsize = 1;
;
memory "sram"
offset = 0x2000;
;
;
#------------------------------------------------------------
# AVR XMEGA-E family common values
#------------------------------------------------------------
# Fuse for fault detection action on Px0..5 (unique to XMEGA-E)
part parent ".xmega" # .xmega-e
desc = "AVR XMEGA-E family common values";
id = ".xmega-e";
memory "fuse6"
size = 1;
initval = 0xff;
offset = 0x8f0026;
;
;
#------------------------------------------------------------
# AVR XMEGA-A family common values
#------------------------------------------------------------
# JTAG user ID (unique to XMEGA-A and XMEGA-B)
part parent ".xmega" # .xmega-a
desc = "AVR XMEGA-A family common values";
id = ".xmega-a";
memory "fuse0"
size = 1;
initval = 0xff;
offset = 0x8f0020;
;
memory "fuse4"
bitmask = 0x1f;
;
;
#------------------------------------------------------------
# ATxmega16A4U
#------------------------------------------------------------
part parent ".xmega-a" # x16a4u
desc = "ATxmega16A4U";
id = "x16a4u";
variants =
"ATxmega16A4U-AN: TQFP44, Fmax=32 MHz, T=[0 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4U-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega16A4U-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4U-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4U-CU: BGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4U-CUR: VFBGA49, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4U-M7: VQFN44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4U-MH: QFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4U-MHR: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 232;
n_interrupts = 127;
boot_section_size = 4096;
signature = 0x1e 0x94 0x41;
usbpid = 0x2fe3;
memory "eeprom"
size = 1024;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x5000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x4000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 256;
offset = 0x803000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 256;
offset = 0x804000;
readsize = 256;
;
memory "fuse4"
initval = 0xfe;
;
memory "prodsig"
size = 52;
readsize = 52;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 2048;
;
;
#------------------------------------------------------------
# ATxmega16C4
#------------------------------------------------------------
part parent "x16a4u" # x16c4
desc = "ATxmega16C4";
id = "x16c4";
variants =
"ATxmega16C4-AN: TQFP44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16C4-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16C4-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16C4-CU: VFBGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16C4-CUR: VFBGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16C4-M7: VFBGA49, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16C4-MH: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16C4-MHR: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 233;
signature = 0x1e 0x94 0x43;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
;
#------------------------------------------------------------
# ATxmega16D4
#------------------------------------------------------------
part parent "x16a4u" # x16d4
desc = "ATxmega16D4";
id = "x16d4";
variants =
"ATxmega16D4: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega16D4-AN: TQFP44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16D4-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16D4-AUR: TQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16D4-CU: BGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16D4-CUR: VFBGA49, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega16D4-M7: VFBGA49, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16D4-MH: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16D4-MHR: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 234;
n_interrupts = 91;
signature = 0x1e 0x94 0x42;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
;
#------------------------------------------------------------
# ATxmega16A4
#------------------------------------------------------------
part parent "x16a4u" # x16a4
desc = "ATxmega16A4";
id = "x16a4";
variants =
"ATxmega16A4: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4-CU: BGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4-CUR: BGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4-MH: QFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4-MHR: QFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16A4-MU: VQFN44, Fmax=32 MHz, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 231;
n_interrupts = 94;
memory "fuse2"
bitmask = 0x43;
;
;
#------------------------------------------------------------
# ATxmega32A4U
#------------------------------------------------------------
part parent ".xmega-a" # x32a4u
desc = "ATxmega32A4U";
id = "x32a4u";
variants =
"ATxmega32A4U-AN: TQFP44, Fmax=32 MHz, T=[0 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4U-ANR: TQFP44, Fmax=32 MHz, T=[0 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4U-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4U-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4U-CU: BGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4U-CUR: VFBGA49, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega32A4U-M7: VQFN44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4U-MH: QFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4U-MHR: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 239;
n_interrupts = 127;
boot_section_size = 4096;
signature = 0x1e 0x95 0x41;
usbpid = 0x2fe4;
memory "eeprom"
size = 1024;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x9000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x8000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 256;
offset = 0x807000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 256;
offset = 0x808000;
readsize = 256;
;
memory "fuse4"
initval = 0xfe;
;
memory "prodsig"
size = 52;
readsize = 52;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 4096;
;
;
#------------------------------------------------------------
# ATxmega32C4
#------------------------------------------------------------
part parent "x32a4u" # x32c4
desc = "ATxmega32C4";
id = "x32c4";
variants =
"ATxmega32C4-AN: TQFP44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C4-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C4-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C4-CU: VFBGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C4-CUR: VFBGA49, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega32C4-M7: VFBGA49, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C4-MH: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C4-MHR: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 240;
signature = 0x1e 0x95 0x44;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
;
#------------------------------------------------------------
# ATxmega32D4
#------------------------------------------------------------
part parent "x32a4u" # x32d4
desc = "ATxmega32D4";
id = "x32d4";
variants =
"ATxmega32D4: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D4-AN: TQFP44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D4-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega32D4-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D4-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D4-CU: VFBGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D4-CUR: VFBGA49, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D4-M7: VFBGA49, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D4-MH: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D4-MHR: VQFN44, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 241;
n_interrupts = 91;
signature = 0x1e 0x95 0x42;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
;
#------------------------------------------------------------
# ATxmega32A4
#------------------------------------------------------------
part parent "x32a4u" # x32a4
desc = "ATxmega32A4";
id = "x32a4";
variants =
"ATxmega32A4: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4-CU: BGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4-CUR: BGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4-MH: QFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4-MHR: QFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32A4-MU: VQFN44, Fmax=32 MHz, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 238;
n_interrupts = 94;
memory "fuse2"
bitmask = 0x43;
;
;
#------------------------------------------------------------
# ATxmega64A4U
#------------------------------------------------------------
part parent ".xmega-a" # x64a4u
desc = "ATxmega64A4U";
id = "x64a4u";
variants =
"ATxmega64A4U-AN: TQFP44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A4U-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A4U-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A4U-CU: VFBGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A4U-CUR: VFBGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A4U-M7: VQFN44PW, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A4U-MH: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A4U-MHR: VQFN44, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 252;
n_interrupts = 127;
boot_section_size = 4096;
signature = 0x1e 0x96 0x46;
usbpid = 0x2fe5;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x11000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x10000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 256;
offset = 0x80f000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 256;
offset = 0x810000;
readsize = 256;
;
memory "fuse4"
initval = 0xfe;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 4096;
;
;
#------------------------------------------------------------
# ATxmega32C3
#------------------------------------------------------------
part parent "x32a4u" # x32c3
desc = "ATxmega32C3";
id = "x32c3";
variants =
"ATxmega32C3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C3-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega32C3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C3-M7: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C3-MH: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32C3-MHR: VQFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 236;
signature = 0x1e 0x95 0x49;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
;
#------------------------------------------------------------
# ATxmega32D3
#------------------------------------------------------------
part parent "x32a4u" # x32d3
desc = "ATxmega32D3";
id = "x32d3";
variants =
"ATxmega32D3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D3-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega32D3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32D3-MHR: VQFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega32D3-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 237;
n_interrupts = 114;
signature = 0x1e 0x95 0x4a;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
;
#------------------------------------------------------------
# ATxmega64C3
#------------------------------------------------------------
part parent "x64a4u" # x64c3
desc = "ATxmega64C3";
id = "x64c3";
variants =
"ATxmega64C3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64C3-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega64C3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64C3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64C3-M7: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64C3-MH: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64C3-MHR: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 249;
signature = 0x1e 0x96 0x49;
usbpid = 0x2fd6;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
;
#------------------------------------------------------------
# ATxmega64D3
#------------------------------------------------------------
part parent "x64a4u" # x64d3
desc = "ATxmega64D3";
id = "x64d3";
variants =
"ATxmega64D3: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D3-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega64D3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D3-MHR: VQFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D3-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 250;
n_interrupts = 114;
signature = 0x1e 0x96 0x4a;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega64D4
#------------------------------------------------------------
part parent "x64a4u" # x64d4
desc = "ATxmega64D4";
id = "x64d4";
variants =
"ATxmega64D4-AN: TQFP44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D4-AU: QFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D4-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D4-CU: VFBGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D4-CUR: VFBGA49, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D4-M7: VFBGA49, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D4-MH: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64D4-MHR: VQFN44, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 253;
n_interrupts = 91;
signature = 0x1e 0x96 0x47;
memory "fuse0" = NULL;
memory "fuse4"
initval = 0xff;
bitmask = 0x1e;
;
;
#------------------------------------------------------------
# ATxmega64A1
#------------------------------------------------------------
part parent "x64a4u" # x64a1
desc = "ATxmega64A1";
id = "x64a1";
variants =
"ATxmega64A1: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1-AU: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1-AUR: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1-C7U: VFBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1-C7UR: VFBGA100, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1-CU: CBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1-CUR: BGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 243;
n_interrupts = 125;
signature = 0x1e 0x96 0x4e;
memory "fuse2"
bitmask = 0x43;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega64A1U
#------------------------------------------------------------
part parent "x64a1" # x64a1u
desc = "ATxmega64A1U";
id = "x64a1u";
variants =
"ATxmega64A1U-AN: TQFP100, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1U-AU: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1U-AUR: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1U-C7U: VFBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1U-C7UR: VFBGA100, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega64A1U-CU: CBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A1U-CUR: TFBGA100, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 244;
n_interrupts = 127;
usbpid = 0x2fe8;
memory "fuse2"
bitmask = 0x63;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
;
#------------------------------------------------------------
# ATxmega64A3
#------------------------------------------------------------
part parent "x64a1" # x64a3
desc = "ATxmega64A3";
id = "x64a3";
variants =
"ATxmega64A3: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3-MU: QFN64, Fmax=32 MHz, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 246;
n_interrupts = 122;
signature = 0x1e 0x96 0x42;
;
#------------------------------------------------------------
# ATxmega64A3U
#------------------------------------------------------------
part parent "x64a1" # x64a3u
desc = "ATxmega64A3U";
id = "x64a3u";
variants =
"ATxmega64A3U-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3U-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3U-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3U-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3U-MHR: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64A3U-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 247;
n_interrupts = 127;
signature = 0x1e 0x96 0x42;
memory "fuse2"
bitmask = 0x63;
;
;
#------------------------------------------------------------
# ATxmega64A4
#------------------------------------------------------------
part parent "x64a1" # x64a4
desc = "ATxmega64A4";
id = "x64a4";
variants =
"ATxmega64A4: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 251;
signature = 0x1e 0x96 0x46;
memory "fuse0"
initval = -1;
;
memory "fuse1"
initval = -1;
;
memory "fuse2"
initval = -1;
bitmask = -1;
;
memory "fuse4"
initval = -1;
bitmask = -1;
;
memory "fuse5"
initval = -1;
bitmask = -1;
;
memory "lock"
initval = -1;
;
;
#------------------------------------------------------------
# ATxmega64B1
#------------------------------------------------------------
part parent "x64a1" # x64b1
desc = "ATxmega64B1";
id = "x64b1";
variants =
"ATxmega64B1-AU: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64B1-AUR: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64B1-CU: VFBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64B1-CUR: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 245;
n_interrupts = 81;
signature = 0x1e 0x96 0x52;
usbpid = 0x2fe1;
memory "fuse2"
bitmask = 0x63;
;
memory "fuse4"
initval = 0xff;
;
;
#------------------------------------------------------------
# ATxmega64B3
#------------------------------------------------------------
part parent "x64a1" # x64b3
desc = "ATxmega64B3";
id = "x64b3";
variants =
"ATxmega64B3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64B3-AUR: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega64B3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 248;
n_interrupts = 54;
signature = 0x1e 0x96 0x51;
usbpid = 0x2fdf;
memory "fuse2"
bitmask = 0x63;
;
memory "fuse4"
initval = 0xff;
;
;
#------------------------------------------------------------
# ATxmega128C3
#------------------------------------------------------------
part parent ".xmega" # x128c3
desc = "ATxmega128C3";
id = "x128c3";
variants =
"ATxmega128C3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128C3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128C3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128C3-M7: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128C3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128C3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 261;
n_interrupts = 127;
boot_section_size = 8192;
signature = 0x1e 0x97 0x52;
usbpid = 0x2fd7;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x22000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 512;
offset = 0x81e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x820000;
readsize = 256;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 8192;
;
;
#------------------------------------------------------------
# ATxmega128D3
#------------------------------------------------------------
part parent "x128c3" # x128d3
desc = "ATxmega128D3";
id = "x128d3";
variants =
"ATxmega128D3: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D3-MHR: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D3-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 262;
n_interrupts = 114;
signature = 0x1e 0x97 0x48;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega128D4
#------------------------------------------------------------
part parent "x128c3" # x128d4
desc = "ATxmega128D4";
id = "x128d4";
variants =
"ATxmega128D4-AN: TQFP44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D4-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D4-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D4-CU: VFBGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D4-CUR: VFBGA49, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega128D4-M7: VFBGA49, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D4-MH: QFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128D4-MHR: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 265;
n_interrupts = 91;
signature = 0x1e 0x97 0x47;
memory "flash"
page_size = 256;
;
;
#------------------------------------------------------------
# ATxmega128A1
#------------------------------------------------------------
part parent "x128c3" # x128a1
desc = "ATxmega128A1";
id = "x128a1";
variants =
"ATxmega128A1: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1-AU: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1-AUR: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1-C7U: VFBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1-C7UR: VFBGA100, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1-CU: CBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1-CUR: BGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 254;
n_interrupts = 125;
signature = 0x1e 0x97 0x4c;
memory "fuse0"
size = 1;
initval = 0xff;
offset = 0x8f0020;
;
memory "fuse2"
bitmask = 0x43;
;
memory "fuse4"
initval = 0xfe;
bitmask = 0x1f;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega128A1 revision D
#------------------------------------------------------------
part parent "x128a1" # x128a1d
desc = "ATxmega128A1revD";
id = "x128a1d";
mcuid = 255;
signature = 0x1e 0x97 0x41;
;
#------------------------------------------------------------
# ATxmega128A1U
#------------------------------------------------------------
part parent "x128a1" # x128a1u
desc = "ATxmega128A1U";
id = "x128a1u";
variants =
"ATxmega128A1U-AN: TQFP100, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1U-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega128A1U-AU: TQFP100, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1U-AUR: N/A, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1U-C7U: VFBGA100, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1U-C7UR: VFBGA100, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega128A1U-CU: CBGA100, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A1U-CUR: CBGA100, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 256;
n_interrupts = 127;
usbpid = 0x2fed;
memory "fuse2"
bitmask = 0x63;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
;
#------------------------------------------------------------
# ATxmega128A3
#------------------------------------------------------------
part parent "x128a1" # x128a3
desc = "ATxmega128A3";
id = "x128a3";
variants =
"ATxmega128A3: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3-MU: QFN64, Fmax=32 MHz, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 258;
n_interrupts = 122;
signature = 0x1e 0x97 0x42;
;
#------------------------------------------------------------
# ATxmega128A3U
#------------------------------------------------------------
part parent "x128a1" # x128a3u
desc = "ATxmega128A3U";
id = "x128a3u";
variants =
"ATxmega128A3U-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3U-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3U-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3U-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3U-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A3U-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 259;
n_interrupts = 127;
signature = 0x1e 0x97 0x42;
usbpid = 0x2fe6;
memory "fuse2"
bitmask = 0x63;
;
;
#------------------------------------------------------------
# ATxmega128A4
#------------------------------------------------------------
part parent ".xmega" # x128a4
desc = "ATxmega128A4";
id = "x128a4";
variants =
"ATxmega128A4: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 263;
signature = 0x1e 0x97 0x46;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x22000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 512;
offset = 0x81f000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x820000;
readsize = 256;
;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
memory "fuse1"
initval = -1;
;
memory "fuse2"
initval = -1;
bitmask = -1;
;
memory "fuse4"
initval = -1;
bitmask = -1;
;
memory "fuse5"
initval = -1;
bitmask = -1;
;
memory "lock"
initval = -1;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 8192;
;
;
#------------------------------------------------------------
# ATxmega128A4U
#------------------------------------------------------------
part parent ".xmega-a" # x128a4u
desc = "ATxmega128A4U";
id = "x128a4u";
variants =
"ATxmega128A4U-AN: TQFP44, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A4U-AU: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A4U-AUR: TQFP44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A4U-CU: BGA49, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A4U-M7: VQFN44PW, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A4U-MH: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128A4U-MHR: VQFN44, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 264;
n_interrupts = 127;
boot_section_size = 8192;
signature = 0x1e 0x97 0x46;
usbpid = 0x2fde;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x22000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x20000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 256;
offset = 0x81f000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 256;
offset = 0x820000;
readsize = 256;
;
memory "fuse4"
initval = 0xfe;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 8192;
;
;
#------------------------------------------------------------
# ATxmega128B1
#------------------------------------------------------------
part parent ".xmega" # x128b1
desc = "ATxmega128B1";
id = "x128b1";
variants =
"ATxmega128B1-AN: TQFP100, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B1-AU: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B1-AUR: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B1-CU: VFBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B1-CUR: TFBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 257;
n_interrupts = 81;
boot_section_size = 8192;
signature = 0x1e 0x97 0x4d;
usbpid = 0x2fea;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x22000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x20000;
page_size = 256;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 256;
offset = 0x81e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 256;
offset = 0x820000;
readsize = 256;
;
memory "fuse0"
size = 1;
initval = 0xff;
offset = 0x8f0020;
;
memory "fuse4"
bitmask = 0x1f;
;
memory "prodsig"
size = 52;
readsize = 52;
;
memory "usersig"
size = 256;
page_size = 256;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 8192;
;
;
#------------------------------------------------------------
# ATxmega128B3
#------------------------------------------------------------
part parent "x128b1" # x128b3
desc = "ATxmega128B3";
id = "x128b3";
variants =
"ATxmega128B3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B3-MCU: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B3-MCUR: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega128B3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 260;
n_interrupts = 54;
signature = 0x1e 0x97 0x4b;
usbpid = 0x2fe0;
;
#------------------------------------------------------------
# ATxmega192C3
#------------------------------------------------------------
part parent ".xmega" # x192c3
desc = "ATxmega192C3";
id = "x192c3";
variants =
"ATxmega192C3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192C3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192C3-MH: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192C3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 269;
n_interrupts = 127;
boot_section_size = 8192;
signature = 0x1e 0x97 0x51;
# usbpid = 0x2f??;
memory "eeprom"
size = 2048;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x32000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x30000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 512;
offset = 0x82e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x830000;
readsize = 256;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 0x4000;
;
;
#------------------------------------------------------------
# ATxmega192D3
#------------------------------------------------------------
part parent "x192c3" # x192d3
desc = "ATxmega192D3";
id = "x192d3";
variants =
"ATxmega192D3: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega192D3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192D3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192D3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192D3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192D3-MHR: VQFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega192D3-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 270;
n_interrupts = 114;
signature = 0x1e 0x97 0x49;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega192A1
#------------------------------------------------------------
part parent "x192c3" # x192a1
desc = "ATxmega192A1";
id = "x192a1";
variants =
"ATxmega192A1-AU: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A1-CU: CBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 266;
signature = 0x1e 0x97 0x4e;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
memory "fuse1"
initval = -1;
;
memory "fuse2"
initval = -1;
bitmask = -1;
;
memory "fuse4"
initval = -1;
bitmask = -1;
;
memory "fuse5"
initval = -1;
bitmask = -1;
;
memory "lock"
initval = -1;
;
;
#------------------------------------------------------------
# ATxmega192A3
#------------------------------------------------------------
part parent "x192c3" # x192a3
desc = "ATxmega192A3";
id = "x192a3";
variants =
"ATxmega192A3: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3-MU: QFN64, Fmax=32 MHz, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 267;
n_interrupts = 122;
signature = 0x1e 0x97 0x44;
memory "fuse0"
size = 1;
initval = 0xff;
offset = 0x8f0020;
;
memory "fuse2"
bitmask = 0x43;
;
memory "fuse4"
initval = 0xfe;
bitmask = 0x1f;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega192A3U
#------------------------------------------------------------
part parent "x192a1" # x192a3u
desc = "ATxmega192A3U";
id = "x192a3u";
variants =
"ATxmega192A3U-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3U-ANR: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3U-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3U-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3U-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega192A3U-MHR: VQFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega192A3U-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 268;
signature = 0x1e 0x97 0x44;
usbpid = 0x2fe7;
memory "fuse0"
initval = 0xff;
;
memory "fuse1"
initval = 0x00;
;
memory "fuse2"
initval = 0xff;
bitmask = 0x63;
;
memory "fuse4"
initval = 0xfe;
bitmask = 0x1f;
;
memory "fuse5"
initval = 0xff;
bitmask = 0x3f;
;
memory "lock"
initval = 0xff;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega256C3
#------------------------------------------------------------
part parent ".xmega" # x256c3
desc = "ATxmega256C3";
id = "x256c3";
variants =
"ATxmega256C3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256C3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256C3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256C3-M7: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256C3-MH: VQFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256C3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 276;
n_interrupts = 127;
boot_section_size = 8192;
signature = 0x1e 0x98 0x46;
usbpid = 0x2fda;
memory "eeprom"
size = 4096;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x42000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x40000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 512;
offset = 0x83e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x840000;
readsize = 256;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 0x4000;
;
;
#------------------------------------------------------------
# ATxmega256D3
#------------------------------------------------------------
part parent "x256c3" # x256d3
desc = "ATxmega256D3";
id = "x256d3";
variants =
"ATxmega256D3: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega256D3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256D3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256D3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256D3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256D3-MHR: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256D3-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 277;
n_interrupts = 114;
signature = 0x1e 0x98 0x44;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega256A1
#------------------------------------------------------------
part parent "x256c3" # x256a1
desc = "ATxmega256A1";
id = "x256a1";
variants =
"ATxmega256A1-AU: TQFP100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A1-CU: CBGA100, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
prog_modes = PM_SPM | PM_PDI | PM_XMEGAJTAG;
mcuid = 271;
memory "fuse0"
size = 1;
offset = 0x8f0020;
;
memory "fuse1"
initval = -1;
;
memory "fuse2"
initval = -1;
bitmask = -1;
;
memory "fuse4"
initval = -1;
bitmask = -1;
;
memory "fuse5"
initval = -1;
bitmask = -1;
;
memory "lock"
initval = -1;
;
;
#------------------------------------------------------------
# ATxmega256A3
#------------------------------------------------------------
part parent "x256a1" # x256a3
desc = "ATxmega256A3";
id = "x256a3";
variants =
"ATxmega256A3: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3-MU: QFN64, Fmax=32 MHz, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 272;
n_interrupts = 122;
signature = 0x1e 0x98 0x42;
memory "fuse0"
initval = 0xff;
;
memory "fuse1"
initval = 0x00;
;
memory "fuse2"
initval = 0xff;
bitmask = 0x43;
;
memory "fuse4"
initval = 0xfe;
bitmask = 0x1f;
;
memory "fuse5"
initval = 0xff;
bitmask = 0x3f;
;
memory "lock"
initval = 0xff;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega256A3U
#------------------------------------------------------------
part parent "x256a1" # x256a3u
desc = "ATxmega256A3U";
id = "x256a3u";
variants =
"ATxmega256A3U-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3U-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega256A3U-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3U-AUR: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3U-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3U-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3U-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 275;
signature = 0x1e 0x98 0x42;
usbpid = 0x2fec;
memory "fuse0"
initval = 0xff;
;
memory "fuse1"
initval = 0x00;
;
memory "fuse2"
initval = 0xff;
bitmask = 0x63;
;
memory "fuse4"
initval = 0xfe;
bitmask = 0x1f;
;
memory "fuse5"
initval = 0xff;
bitmask = 0x3f;
;
memory "lock"
initval = 0xff;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega256A3B
#------------------------------------------------------------
part parent "x256a1" # x256a3b
desc = "ATxmega256A3B";
id = "x256a3b";
variants =
"ATxmega256A3B: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3B-AU: TQFP64, Fmax=32 MHz, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3B-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3B-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3B-MU: QFN64, Fmax=32 MHz, T=[N/A, N/A], Vcc=[1.6 V, 3.6 V]";
mcuid = 273;
n_interrupts = 122;
signature = 0x1e 0x98 0x43;
memory "fuse0"
initval = 0xff;
;
memory "fuse1"
initval = 0x00;
;
memory "fuse2"
initval = 0xff;
bitmask = 0x43;
;
memory "fuse4"
initval = 0xfe;
bitmask = 0x1f;
;
memory "fuse5"
initval = 0xff;
bitmask = 0x3f;
;
memory "lock"
initval = 0xff;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega256A3BU
#------------------------------------------------------------
part parent "x256a1" # x256a3bu
desc = "ATxmega256A3BU";
id = "x256a3bu";
variants =
"ATxmega256A3BU-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3BU-AUR: TQFP64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega256A3BU-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega256A3BU-MHR: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 274;
signature = 0x1e 0x98 0x43;
usbpid = 0x2fe2;
memory "fuse0"
initval = 0xff;
;
memory "fuse1"
initval = 0x00;
;
memory "fuse2"
initval = 0xff;
bitmask = 0x63;
;
memory "fuse4"
initval = 0xfe;
bitmask = 0x1f;
;
memory "fuse5"
initval = 0xff;
bitmask = 0x3f;
;
memory "lock"
initval = 0xff;
;
memory "prodsig"
size = 52;
page_size = 1;
readsize = 52;
;
;
#------------------------------------------------------------
# ATxmega384C3
#------------------------------------------------------------
part parent ".xmega" # x384c3
desc = "ATxmega384C3";
id = "x384c3";
variants =
"ATxmega384C3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega384C3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega384C3-AUR: TQFP64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega384C3-M7: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega384C3-MH: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega384C3-MHR: VQFN64, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 278;
n_interrupts = 127;
boot_section_size = 8192;
signature = 0x1e 0x98 0x45;
usbpid = 0x2fdb;
memory "eeprom"
size = 4096;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x62000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x60000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 8192;
page_size = 512;
offset = 0x85e000;
readsize = 256;
;
memory "boot"
size = 8192;
page_size = 512;
offset = 0x860000;
readsize = 256;
;
memory "prodsig"
size = 64;
page_size = 64;
readsize = 64;
;
memory "usersig"
size = 512;
page_size = 512;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 0x8000;
;
;
#------------------------------------------------------------
# ATxmega384D3
#------------------------------------------------------------
part parent "x384c3" # x384d3
desc = "ATxmega384D3";
id = "x384d3";
variants =
"ATxmega384D3-AN: TQFP64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega384D3-AU: TQFP64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega384D3-MH: VQFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega384D3-MHR: QFN64, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega384D3-MN: QFN64, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 279;
n_interrupts = 114;
signature = 0x1e 0x98 0x47;
;
#------------------------------------------------------------
# ATxmega8E5
#------------------------------------------------------------
part parent ".xmega-e" # x8e5
desc = "ATxmega8E5";
id = "x8e5";
variants =
"ATxmega8E5-AN: TQFP32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega8E5-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega8E5-AU: TQFP32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega8E5-AUR: TQFP32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega8E5-M4N: UQFN32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega8E5-M4U: UQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega8E5-M4UR: UQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega8E5-MN: VQFN32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega8E5-MNR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega8E5-MU: VQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega8E5-MUR: VQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 230;
n_interrupts = 43;
boot_section_size = 2048;
signature = 0x1e 0x93 0x41;
memory "eeprom"
size = 512;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x2800;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 8192;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 2048;
page_size = 128;
offset = 0x801800;
readsize = 256;
;
memory "boot"
size = 2048;
page_size = 128;
offset = 0x802000;
readsize = 256;
;
memory "fuse2"
bitmask = 0x43;
;
memory "prodsig"
size = 54;
readsize = 54;
;
memory "usersig"
size = 128;
page_size = 128;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 1024;
;
;
#------------------------------------------------------------
# ATxmega16E5
#------------------------------------------------------------
part parent ".xmega-e" # x16e5
desc = "ATxmega16E5";
id = "x16e5";
variants =
"ATxmega16E5-AN: TQFP32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-ANR: TQFP32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-AU: TQFP32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-AUR: TQFP32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-M4N: UQFN32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-M4U: UQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-M4UR: UQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-MN: VQFN32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-MNR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega16E5-MU: VQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega16E5-MUR: VQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 235;
n_interrupts = 43;
boot_section_size = 4096;
signature = 0x1e 0x94 0x45;
memory "eeprom"
size = 512;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x5000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x4000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 128;
offset = 0x803000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 128;
offset = 0x804000;
readsize = 256;
;
memory "fuse2"
bitmask = 0x43;
;
memory "prodsig"
size = 54;
readsize = 54;
;
memory "usersig"
size = 128;
page_size = 128;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 2048;
;
;
#------------------------------------------------------------
# ATxmega32E5
#------------------------------------------------------------
part parent ".xmega-e" # x32e5
desc = "ATxmega32E5";
id = "x32e5";
variants =
"ATxmega32E5-AN: TQFP32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32E5-ANR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega32E5-AU: TQFP32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32E5-AUR: TQFP32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32E5-M4N: UQFN32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32E5-M4U: UQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32E5-M4UR: UQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32E5-MN: VQFN32, Fmax=32 MHz, T=[-40 C, 105 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32E5-MNR: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"ATxmega32E5-MU: VQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]",
"ATxmega32E5-MUR: VQFN32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.6 V, 3.6 V]";
mcuid = 242;
n_interrupts = 43;
boot_section_size = 4096;
signature = 0x1e 0x95 0x4c;
memory "eeprom"
size = 1024;
page_size = 32;
offset = 0x8c0000;
readsize = 256;
;
memory "flash"
size = 0x9000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "application"
size = 0x8000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "apptable"
size = 4096;
page_size = 128;
offset = 0x807000;
readsize = 256;
;
memory "boot"
size = 4096;
page_size = 128;
offset = 0x808000;
readsize = 256;
;
memory "fuse2"
bitmask = 0x43;
;
memory "prodsig"
size = 54;
readsize = 54;
;
memory "usersig"
size = 128;
page_size = 128;
offset = 0x8e0400;
readsize = 256;
;
memory "sram"
size = 4096;
;
;
#------------------------------------------------------------
# AVR32UC3A0512
#------------------------------------------------------------
part # uc3a0512
desc = "AT32UC3A0512";
id = "uc3a0512";
variants =
"AT32UC3A0512-ALTR: LQFP144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512-ALTRA: LQFP144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512-ALTT: LQFP144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512-ALTTA: LQFP144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512-ALUR: LQFP144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512-ALUT: LQFP144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512-CTUR: TFBGA144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512-CTUT: TFBGA144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512AU-ALTRA: LQFP144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]",
"AT32UC3A0512AU-ALUT: LQFP144, Fmax=66 MHz, T=[-40 C, 85 C], Vcc=[1.65 V, 3.6 V]";
prog_modes = PM_AVR32JTAG | PM_aWire;
signature = 0xed 0xc0 0x3f;
memory "flash"
paged = yes;
size = 0x80000; # could be set dynamicly
page_size = 512; # bytes
num_pages = 1024; # could be set dynamicly
offset = 0x80000000;
readsize = 512; # bytes
;
;
#------------------------------------------------------------
# ATtiny1634
#------------------------------------------------------------
part # t1634
desc = "ATtiny1634";
id = "t1634";
variants =
"ATtiny1634: N/A, Fmax=N/A, T=[N/A, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634-MN: WQFN20, Fmax=12 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634-MNR: WQFN20, Fmax=12 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634-MU: QFN20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634-MUR: QFN20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634-SU: SOIC20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634-SUR: SOIC20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
prog_modes = PM_SPM | PM_ISP | PM_HVPP | PM_debugWIRE;
mcuid = 40;
n_interrupts = 28;
n_page_erase = 4;
stk500_devcode = 0x86;
chip_erase_delay = 9000;
pagel = 0xb3;
bs2 = 0xb1;
# avr910_devcode = 0x??;
signature = 0x1e 0x94 0x12;
reset = io;
timeout = 200;
stabdelay = 100;
cmdexedelay = 25;
synchloops = 32;
pollindex = 3;
pollvalue = 0x53;
predelay = 1;
postdelay = 1;
pollmethod = 1;
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
flash_instr = 0xb6, 0x01, 0x11;
eeprom_instr =
0xbd, 0xf2, 0xbd, 0xe1, 0xbb, 0xcf, 0xb4, 0x00,
0xbe, 0x01, 0xb6, 0x01, 0xbc, 0x00, 0xbb, 0xbf,
0x99, 0xf9, 0xbb, 0xaf;
hventerstabdelay = 100;
latchcycles = 5;
togglevtg = 1;
poweroffdelay = 15;
resetdelayms = 1;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x2e;
spmcr = 0x57;
eecr = 0x3c;
ocdrev = 1;
factory_fcpu = 1000000;
chip_erase = "1010.1100--100x.xxxx--xxxx.xxxx--xxxx.xxxx";
pgm_enable = "1010.1100--0101.0011--xxxx.xxxx--xxxx.xxxx";
memory "eeprom"
size = 256;
page_size = 4;
min_write_delay = 3600;
max_write_delay = 3600;
mode = 0x41;
delay = 20;
blocksize = 4;
readsize = 256;
read = "1010.0000--000x.xxxa--aaaa.aaaa--oooo.oooo";
write = "1100.0000--000x.xxxa--aaaa.aaaa--iiii.iiii";
loadpage_lo = "1100.0001--0000.0000--0000.00aa--iiii.iiii";
writepage = "1100.0010--00xx.xxxa--aaaa.aa00--xxxx.xxxx";
;
memory "flash"
paged = yes;
size = 0x4000;
page_size = 32;
num_pages = 512;
min_write_delay = 4500;
max_write_delay = 4500;
mode = 0x41;
delay = 10;
blocksize = 32;
readsize = 256;
read_lo = "0010.0000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
read_hi = "0010.1000--00aa.aaaa--aaaa.aaaa--oooo.oooo";
loadpage_lo = "0100.0000--000x.xxxx--xxxx.aaaa--iiii.iiii";
loadpage_hi = "0100.1000--000x.xxxx--xxxx.aaaa--iiii.iiii";
writepage = "0100.1100--00aa.aaaa--aaaa.xxxx--xxxx.xxxx";
;
memory "lfuse"
size = 1;
initval = 0x62;
bitmask = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0000--xxxx.xxxx--iiii.iiii";
;
memory "hfuse"
size = 1;
initval = 0xdf;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.1000--xxxx.xxxx--iiii.iiii";
;
memory "efuse"
size = 1;
initval = 0xff;
bitmask = 0x1f;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.0000--0000.1000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--1010.0100--xxxx.xxxx--xxxi.iiii";
;
memory "lock"
size = 1;
initval = 0xff;
bitmask = 0x03;
min_write_delay = 4500;
max_write_delay = 4500;
read = "0101.1000--0000.0000--xxxx.xxxx--oooo.oooo";
write = "1010.1100--111x.xxxx--xxxx.xxxx--1111.11ii";
;
memory "signature"
size = 3;
read = "0011.0000--000x.xxxx--xxxx.xxaa--oooo.oooo";
;
memory "calibration"
size = 1;
read = "0011.1000--000x.xxxx--0000.0000--oooo.oooo";
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 1024;
offset = 0x100;
;
;
#------------------------------------------------------------
# ATtiny1634R
#------------------------------------------------------------
part parent "t1634" # t1634r
desc = "ATtiny1634R";
id = "t1634r";
variants =
"ATtiny1634R-MU: QFN20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634R-MUR: WQFN20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634R-SU: SOIC20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1634R-SUR: SOIC20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 41;
;
#------------------------------------------------------------
# Common values for reduced core tinys (4/5/9/10/20/40)
#------------------------------------------------------------
part # .reduced_core_tiny
desc = "Common values for reduced core tinys";
id = ".reduced_core_tiny";
prog_modes = PM_TPI;
memory "fuse"
size = 1;
page_size = 16;
initval = 0xff;
bitmask = 0x07;
offset = 0x3f40;
blocksize = 4;
;
memory "lockbits"
size = 1;
page_size = 16;
initval = 0xff;
bitmask = 0x03;
offset = 0x3f00;
;
memory "signature"
size = 3;
page_size = 16;
offset = 0x3fc0;
;
memory "calibration"
size = 1;
page_size = 16;
offset = 0x3f80;
;
memory "sram"
size = 32;
offset = 0x40;
;
;
#------------------------------------------------------------
# ATtiny4
#------------------------------------------------------------
part parent ".reduced_core_tiny" # t4
desc = "ATtiny4";
id = "t4";
variants =
"ATtiny4-MAHR: UDFN8, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny4-TS8R: SOT23-6, Fmax=10 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny4-TSHR: SOT23-6, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 0;
n_interrupts = 10;
signature = 0x1e 0x8f 0x0a;
factory_fcpu = 1000000;
memory "flash"
size = 512;
page_size = 16;
offset = 0x4000;
blocksize = 128;
;
memory "io"
size = 64;
;
;
#------------------------------------------------------------
# ATtiny5
#------------------------------------------------------------
part parent "t4" # t5
desc = "ATtiny5";
id = "t5";
variants =
"ATtiny5-MAHR: USON8, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny5-TS8R: SOT23-6, Fmax=10 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny5-TSHR: SOT23-6, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 1;
n_interrupts = 11;
signature = 0x1e 0x8f 0x09;
;
#------------------------------------------------------------
# ATtiny9
#------------------------------------------------------------
part parent ".reduced_core_tiny" # t9
desc = "ATtiny9";
id = "t9";
variants =
"ATtiny9-MAHR: DFN8, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny9-TS8R: SOT23-6, Fmax=10 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny9-TSHR: SOT23-6, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 2;
n_interrupts = 10;
signature = 0x1e 0x90 0x08;
factory_fcpu = 1000000;
memory "flash"
size = 1024;
page_size = 16;
offset = 0x4000;
blocksize = 128;
;
memory "io"
size = 64;
;
;
#------------------------------------------------------------
# ATtiny10
#------------------------------------------------------------
part parent "t9" # t10
desc = "ATtiny10";
id = "t10";
variants =
"ATtiny10-MAHR: UDFN8, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny10-TS8R: SOT23-6, Fmax=10 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny10-TSHR: SOT23-6, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 3;
n_interrupts = 11;
signature = 0x1e 0x90 0x03;
;
#------------------------------------------------------------
# ATtiny20
#------------------------------------------------------------
part parent ".reduced_core_tiny" # t20
desc = "ATtiny20";
id = "t20";
variants =
"ATtiny20-CCU: UFBGA15, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny20-CCUR: UFBGA15, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny20-MMH: VQFN20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny20-MMHR: VQFN20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny20-SSU: SOIC14, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny20-SSUR: SOIC14, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny20-UUR: WLCSP12, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny20-XU: TSSOP14, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny20-XUR: TSSOP14, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 4;
n_interrupts = 17;
signature = 0x1e 0x91 0x0f;
factory_fcpu = 1000000;
memory "flash"
size = 2048;
page_size = 16;
n_word_writes = 2;
offset = 0x4000;
blocksize = 128;
;
memory "fuse"
bitmask = 0x77;
n_word_writes = 2;
;
memory "io"
size = 64;
;
memory "sram"
size = 128;
;
;
#------------------------------------------------------------
# ATtiny40
#------------------------------------------------------------
part parent ".reduced_core_tiny" # t40
desc = "ATtiny40";
id = "t40";
variants =
"ATtiny40-MMH: VQFN20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny40-MMHR: VQFN20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny40-SU: SOIC20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny40-SUR: SOIC20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny40-XU: TSSOP20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny40-XUR: TSSOP20, Fmax=12 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 5;
n_interrupts = 18;
signature = 0x1e 0x92 0x0e;
factory_fcpu = 1000000;
memory "flash"
size = 4096;
page_size = 64;
n_word_writes = 4;
offset = 0x4000;
blocksize = 128;
;
memory "fuse"
bitmask = 0x77;
n_word_writes = 4;
;
memory "io"
size = 64;
;
memory "sram"
size = 256;
;
;
#------------------------------------------------------------
# ATtiny102
#------------------------------------------------------------
part parent ".reduced_core_tiny" # t102
desc = "ATtiny102";
id = "t102";
variants =
"ATtiny102-M7R: UDFN8, Fmax=12 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny102-M8R: UDFN8, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny102-SSFR: SOIC8, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny102-SSNR: SOIC8, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny102F-M7R: UDFN8, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny102F-M8R: UDFN8, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny102F-SSFR: SOIC8, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny102F-SSNR: SOIC8, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 6;
n_interrupts = 16;
signature = 0x1e 0x90 0x0c;
factory_fcpu = 1000000;
memory "flash"
size = 1024;
page_size = 16;
offset = 0x4000;
blocksize = 128;
;
memory "fuse"
bitmask = 0x0f;
;
memory "prodsig"
size = 16;
page_size = 16;
offset = 0x3fc0;
;
memory "sigrow"
alias "prodsig";
;
memory "io"
size = 64;
;
;
#------------------------------------------------------------
# ATtiny104
#------------------------------------------------------------
part parent ".reduced_core_tiny" # t104
desc = "ATtiny104";
id = "t104";
variants =
"ATtiny104-SSFR: SOIC14, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny104-SSNR: SOIC14, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny104F-SSFR: SOIC14, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny104F-SSNR: SOIC14, Fmax=12 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 7;
n_interrupts = 16;
signature = 0x1e 0x90 0x0b;
factory_fcpu = 1000000;
memory "flash"
size = 1024;
page_size = 16;
offset = 0x4000;
blocksize = 128;
;
memory "fuse"
bitmask = 0x0f;
;
memory "prodsig"
size = 16;
page_size = 16;
offset = 0x3fc0;
;
memory "sigrow"
alias "prodsig";
;
memory "io"
size = 64;
;
;
#------------------------------------------------------------
# ATmega406
#------------------------------------------------------------
part # m406
desc = "ATmega406";
id = "m406";
variants =
"ATmega406: N/A, Fmax=1 MHz, T=[N/A, N/A], Vcc=[3.3 V, 3.3 V]",
"ATmega406-1AAU: LQFP48, Fmax=1 MHz, T=[-30 C, 85 C], Vcc=[4 V, 25 V]";
prog_modes = PM_SPM | PM_HVPP | PM_JTAG;
mcuid = 125;
n_interrupts = 23;
n_boot_sections = 4;
boot_section_size = 512;
# STK500 parameters (parallel programming IO lines)
pagel = 0xa7;
bs2 = 0xa0;
signature = 0x1e 0x95 0x07;
reset = io;
serial = no;
# STK500v2 HV programming parameters, from XML
pp_controlstack =
0x0e, 0x1e, 0x0f, 0x1f, 0x2e, 0x3e, 0x2f, 0x3f,
0x4e, 0x5e, 0x4f, 0x5f, 0x6e, 0x7e, 0x6f, 0x7f,
0x66, 0x76, 0x67, 0x77, 0x6a, 0x7a, 0x6b, 0x7b,
0xbe, 0xfd, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00;
hventerstabdelay = 100;
latchcycles = 6;
hvleavestabdelay = 15;
resetdelay = 15;
chiperasepolltimeout = 10;
programfusepolltimeout = 5;
programlockpolltimeout = 5;
idr = 0x31;
spmcr = 0x57;
eecr = 0x3f;
ocdrev = 3;
factory_fcpu = 1000000;
memory "eeprom"
size = 512;
page_size = 4;
num_pages = 128;
blocksize = 4;
readsize = 4;
;
memory "flash"
paged = yes;
size = 0xa000;
page_size = 128;
num_pages = 320;
blocksize = 128;
readsize = 128;
;
memory "lfuse"
size = 1;
initval = 0xcd;
;
memory "hfuse"
size = 1;
initval = 0xfe;
bitmask = 0x03;
;
memory "lockbits"
size = 1;
initval = 0xff;
bitmask = 0x3f;
;
memory "signature"
size = 3;
;
memory "io"
size = 224;
offset = 0x20;
;
memory "sram"
size = 2048;
offset = 0x100;
;
;
#------------------------------------------------------------
# AVR8X family common values
#------------------------------------------------------------
part # .avr8x
desc = "AVR8X family common values";
id = ".avr8x";
prog_modes = PM_SPM | PM_UPDI;
n_boot_sections = 1;
boot_section_size = 256;
nvm_base = 0x1000;
ocd_base = 0x0f80;
syscfg_base = 0x0f00;
factory_fcpu = 20000000;
memory "fuses"
size = 10;
offset = 0x1280;
readsize = 1;
;
memory "fuse0"
size = 1;
initval = 0x00;
offset = 0x1280;
readsize = 1;
;
memory "wdtcfg"
alias "fuse0";
;
memory "fuse1"
size = 1;
initval = 0x00;
offset = 0x1281;
readsize = 1;
;
memory "bodcfg"
alias "fuse1";
;
memory "fuse2"
size = 1;
initval = 0x7e;
bitmask = 0x83;
offset = 0x1282;
readsize = 1;
;
memory "osccfg"
alias "fuse2";
;
memory "fuse5"
size = 1;
initval = 0xf6;
bitmask = 0xcd;
offset = 0x1285;
readsize = 1;
;
memory "syscfg0"
alias "fuse5";
;
memory "fuse6"
size = 1;
initval = 0xff;
bitmask = 0x07;
offset = 0x1286;
readsize = 1;
;
memory "syscfg1"
alias "fuse6";
;
memory "fuse7"
size = 1;
initval = 0x00;
offset = 0x1287;
readsize = 1;
;
memory "append"
alias "fuse7";
;
memory "codesize"
alias "fuse7";
;
memory "fuse8"
size = 1;
initval = 0x00;
offset = 0x1288;
readsize = 1;
;
memory "bootend"
alias "fuse8";
;
memory "bootsize"
alias "fuse8";
;
memory "lock"
size = 1;
offset = 0x128a;
readsize = 1;
;
memory "prodsig"
size = 64;
page_size = 64;
offset = 0x1100;
readsize = 64;
;
memory "sigrow"
alias "prodsig";
;
memory "signature"
size = 3;
offset = 0x1100;
readsize = 3;
;
memory "tempsense"
size = 2;
offset = 0x1120;
readsize = 1;
;
memory "sernum"
size = 10;
offset = 0x1103;
readsize = 1;
;
memory "osccal16"
size = 2;
offset = 0x1118;
readsize = 1;
;
memory "osccal20"
size = 2;
offset = 0x111a;
readsize = 1;
;
memory "osc16err"
size = 2;
offset = 0x1122;
readsize = 1;
;
memory "osc20err"
size = 2;
offset = 0x1124;
readsize = 1;
;
memory "io"
size = 4352;
readsize = 1;
;
memory "sib"
size = 32;
readsize = 1;
;
;
#------------------------------------------------------------
# AVR8X tiny family common values
#------------------------------------------------------------
part parent ".avr8x" # .avr8x_tiny
desc = "AVR8X tiny family common values";
id = ".avr8x_tiny";
family_id = "tinyAVR";
# Shared UPDI pin, HV on UPDI pin
hvupdi_variant = 0;
memory "userrow"
size = 32;
page_size = 32;
offset = 0x1300;
readsize = 256;
;
memory "usersig"
alias "userrow";
;
;
#------------------------------------------------------------
# AVR8X mega family common values
#------------------------------------------------------------
part parent ".avr8x" # .avr8x_mega
desc = "AVR8X mega family common values";
id = ".avr8x_mega";
family_id = "megaAVR";
# Dedicated UPDI pin, no HV
hvupdi_variant = 1;
memory "fuse5"
bitmask = 0xc9;
;
memory "userrow"
size = 64;
page_size = 64;
offset = 0x1300;
readsize = 256;
;
memory "usersig"
alias "userrow";
;
;
#------------------------------------------------------------
# ATtiny202
#------------------------------------------------------------
part parent ".avr8x_tiny" # t202
desc = "ATtiny202";
id = "t202";
variants =
"ATtiny202-SSF: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny202-SSFR: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny202-SSN: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny202-SSNR: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 280;
n_interrupts = 26;
signature = 0x1e 0x91 0x23;
memory "eeprom"
size = 64;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 2048;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 128;
offset = 0x3f80;
;
;
#------------------------------------------------------------
# ATtiny204
#------------------------------------------------------------
part parent ".avr8x_tiny" # t204
desc = "ATtiny204";
id = "t204";
variants =
"ATtiny204-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny204-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny204-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny204-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 281;
n_interrupts = 26;
signature = 0x1e 0x91 0x22;
memory "eeprom"
size = 64;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 2048;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 128;
offset = 0x3f80;
;
;
#------------------------------------------------------------
# ATtiny402
#------------------------------------------------------------
part parent ".avr8x_tiny" # t402
desc = "ATtiny402";
id = "t402";
variants =
"ATtiny402-SSF: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny402-SSFR: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny402-SSN: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny402-SSNR: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 284;
n_interrupts = 26;
signature = 0x1e 0x92 0x27;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 256;
offset = 0x3f00;
;
;
#------------------------------------------------------------
# ATtiny404
#------------------------------------------------------------
part parent ".avr8x_tiny" # t404
desc = "ATtiny404";
id = "t404";
variants =
"ATtiny404-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny404-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny404-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny404-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 285;
n_interrupts = 26;
signature = 0x1e 0x92 0x26;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 256;
offset = 0x3f00;
;
;
#------------------------------------------------------------
# ATtiny406
#------------------------------------------------------------
part parent ".avr8x_tiny" # t406
desc = "ATtiny406";
id = "t406";
variants =
"ATtiny406-MFR: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny406-MNR: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny406-SF: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny406-SFR: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny406-SN: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny406-SNR: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 286;
n_interrupts = 26;
signature = 0x1e 0x92 0x25;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 256;
offset = 0x3f00;
;
;
#------------------------------------------------------------
# ATtiny804
#------------------------------------------------------------
part parent ".avr8x_tiny" # t804
desc = "ATtiny804";
id = "t804";
variants =
"ATtiny804-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny804-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny804-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny804-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 295;
n_interrupts = 31;
signature = 0x1e 0x93 0x25;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny806
#------------------------------------------------------------
part parent ".avr8x_tiny" # t806
desc = "ATtiny806";
id = "t806";
variants =
"ATtiny806-MF: VQFN20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny806-MFR: QFN20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny806-MN: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny806-MNR: QFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny806-SF: SOIC20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny806-SFR: SOIC300-20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny806-SN: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny806-SNR: SOIC300-20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 296;
n_interrupts = 31;
signature = 0x1e 0x93 0x24;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny807
#------------------------------------------------------------
part parent ".avr8x_tiny" # t807
desc = "ATtiny807";
id = "t807";
variants =
"ATtiny807-MF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny807-MFR: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny807-MN: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny807-MNR: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny807-MRF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 297;
n_interrupts = 31;
signature = 0x1e 0x93 0x23;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny1604
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1604
desc = "ATtiny1604";
id = "t1604";
variants =
"ATtiny1604-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1604-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1604-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1604-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 304;
n_interrupts = 31;
signature = 0x1e 0x94 0x25;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 1024;
offset = 0x3c00;
;
;
#------------------------------------------------------------
# ATtiny1606
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1606
desc = "ATtiny1606";
id = "t1606";
variants =
"ATtiny1606-MF: VQFN20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1606-MFR: VQFN20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1606-MN: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1606-MNR: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1606-SF: SOIC20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1606-SFR: SOIC300-20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1606-SN: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1606-SNR: SOIC300-20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 305;
n_interrupts = 31;
signature = 0x1e 0x94 0x24;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 1024;
offset = 0x3c00;
;
;
#------------------------------------------------------------
# ATtiny1607
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1607
desc = "ATtiny1607";
id = "t1607";
variants =
"ATtiny1607-MF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1607-MFR: VQFN24, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1607-MN: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1607-MNR: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1607-MRF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 306;
n_interrupts = 31;
signature = 0x1e 0x94 0x23;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 1024;
offset = 0x3c00;
;
;
#------------------------------------------------------------
# ATtiny212
#------------------------------------------------------------
part parent ".avr8x_tiny" # t212
desc = "ATtiny212";
id = "t212";
variants =
"ATtiny212-SSF: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny212-SSFR: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny212-SSN: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny212-SSNR: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 282;
n_interrupts = 26;
signature = 0x1e 0x91 0x21;
memory "eeprom"
size = 64;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 2048;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 128;
offset = 0x3f80;
;
;
#------------------------------------------------------------
# ATtiny214
#------------------------------------------------------------
part parent ".avr8x_tiny" # t214
desc = "ATtiny214";
id = "t214";
variants =
"ATtiny214-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny214-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny214-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny214-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 283;
n_interrupts = 26;
signature = 0x1e 0x91 0x20;
memory "eeprom"
size = 64;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 2048;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 128;
offset = 0x3f80;
;
;
#------------------------------------------------------------
# ATtiny412
#------------------------------------------------------------
part parent ".avr8x_tiny" # t412
desc = "ATtiny412";
id = "t412";
variants =
"ATtiny412-SSF: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny412-SSFR: SOIC8, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny412-SSN: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny412-SSNR: SOIC8, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 287;
n_interrupts = 26;
signature = 0x1e 0x92 0x23;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 256;
offset = 0x3f00;
;
;
#------------------------------------------------------------
# ATtiny414
#------------------------------------------------------------
part parent ".avr8x_tiny" # t414
desc = "ATtiny414";
id = "t414";
variants =
"ATtiny414-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny414-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny414-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny414-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 288;
n_interrupts = 26;
signature = 0x1e 0x92 0x22;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 256;
offset = 0x3f00;
;
;
#------------------------------------------------------------
# ATtiny416
#------------------------------------------------------------
part parent ".avr8x_tiny" # t416
desc = "ATtiny416";
id = "t416";
variants =
"ATtiny416-MFR: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny416-MNR: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny416-SF: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny416-SFR: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny416-SN: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny416-SNR: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 289;
n_interrupts = 26;
signature = 0x1e 0x92 0x21;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 256;
offset = 0x3f00;
;
;
#------------------------------------------------------------
# ATtiny416auto
#------------------------------------------------------------
part parent "t416" # t416auto
desc = "ATtiny416auto";
id = "t416auto";
variants =
"ATtiny416-MBT: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny416-MZT: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]";
mcuid = 290;
signature = 0x1e 0x92 0x28;
factory_fcpu = 16000000;
memory "fuse2"
initval = 0x7d;
;
;
#------------------------------------------------------------
# ATtiny417
#------------------------------------------------------------
part parent ".avr8x_tiny" # t417
desc = "ATtiny417";
id = "t417";
variants =
"ATtiny417-MF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny417-MFR: QFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny417-MN: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny417-MNR: QFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 291;
n_interrupts = 26;
signature = 0x1e 0x92 0x20;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 256;
offset = 0x3f00;
;
;
#------------------------------------------------------------
# ATtiny814
#------------------------------------------------------------
part parent ".avr8x_tiny" # t814
desc = "ATtiny814";
id = "t814";
variants =
"ATtiny814-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny814-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny814-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny814-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny814-SSNRES: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 298;
n_interrupts = 26;
signature = 0x1e 0x93 0x22;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny816
#------------------------------------------------------------
part parent ".avr8x_tiny" # t816
desc = "ATtiny816";
id = "t816";
variants =
"ATtiny816-MF: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny816-MFR: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny816-MN: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny816-MNR: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny816-MNRES: VQFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny816-SF: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny816-SFR: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny816-SN: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny816-SNR: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 299;
n_interrupts = 26;
signature = 0x1e 0x93 0x21;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny817
#------------------------------------------------------------
part parent ".avr8x_tiny" # t817
desc = "ATtiny817";
id = "t817";
variants =
"ATtiny817-MF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny817-MFR: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny817-MN: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny817-MNR: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny817-MNRES: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 300;
n_interrupts = 26;
signature = 0x1e 0x93 0x20;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny1614
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1614
desc = "ATtiny1614";
id = "t1614";
variants =
"ATtiny1614-SSF: SOIC14, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1614-SSFR: SOIC14, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1614-SSN: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1614-SSNR: SOIC14, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 307;
n_interrupts = 31;
signature = 0x1e 0x94 0x22;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATtiny1616
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1616
desc = "ATtiny1616";
id = "t1616";
variants =
"ATtiny1616-MFR: QFN20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1616-MNR: QFN20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1616-SF: SOIC20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1616-SFR: SOIC20, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1616-SN: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1616-SNR: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 308;
n_interrupts = 31;
signature = 0x1e 0x94 0x21;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATtiny1617
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1617
desc = "ATtiny1617";
id = "t1617";
variants =
"ATtiny1617-MF: VQFN24, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny1617-MFR: VQFN24, Fmax=16 MHz, T=[-40 C, 125 C], Vcc=[2.7 V, 5.5 V]",
"ATtiny1617-MN: QFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1617-MNR: QFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 309;
n_interrupts = 31;
signature = 0x1e 0x94 0x20;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATtiny3216
#------------------------------------------------------------
part parent ".avr8x_tiny" # t3216
desc = "ATtiny3216";
id = "t3216";
variants =
"ATtiny3216-SF: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3216-SFR: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3216-SN: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3216-SNR: SOIC20, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 314;
n_interrupts = 31;
signature = 0x1e 0x95 0x21;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
memory "fuse4"
size = 1;
initval = 0x00;
offset = 0x1284;
readsize = 1;
;
memory "tcd0cfg"
alias "fuse4";
;
memory "lock"
initval = 0xc5;
;
memory "userrow"
size = 64;
page_size = 64;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATtiny3217
#------------------------------------------------------------
part parent "t3216" # t3217
desc = "ATtiny3217";
id = "t3217";
variants =
"ATtiny3217-MF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3217-MFR: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3217-MN: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3217-MNR: VQFN24, Fmax=20 MHz, T=[-40 C, 105 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 315;
signature = 0x1e 0x95 0x22;
;
#------------------------------------------------------------
# ATtiny424
#------------------------------------------------------------
part parent ".avr8x_tiny" # t424
desc = "ATtiny424";
id = "t424";
variants =
"ATtiny424: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny424-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny424-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny424-SSU: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny424-SSUR: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny424-XF: TSSOP14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny424-XFR: TSSOP14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny424-XU: TSSOP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny424-XUR: TSSOP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 292;
n_interrupts = 30;
signature = 0x1e 0x92 0x2c;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny426
#------------------------------------------------------------
part parent ".avr8x_tiny" # t426
desc = "ATtiny426";
id = "t426";
variants =
"ATtiny426: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-MF: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-MFR: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-MU: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-MUR: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-SF: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-SFR: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-XF: SSOP20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-XFR: SSOP20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-XU: SSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny426-XUR: SSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 293;
n_interrupts = 30;
signature = 0x1e 0x92 0x2b;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny427
#------------------------------------------------------------
part parent ".avr8x_tiny" # t427
desc = "ATtiny427";
id = "t427";
variants =
"ATtiny427: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny427-MF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny427-MFR: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny427-MU: VQFN24, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny427-MUR: VQFN24, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 294;
n_interrupts = 30;
signature = 0x1e 0x92 0x2a;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 4096;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 512;
offset = 0x3e00;
;
;
#------------------------------------------------------------
# ATtiny824
#------------------------------------------------------------
part parent ".avr8x_tiny" # t824
desc = "ATtiny824";
id = "t824";
variants =
"ATtiny824: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny824-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny824-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny824-SSU: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny824-SSUR: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny824-XF: TSSOP14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny824-XFR: TSSOP14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny824-XU: TSSOP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny824-XUR: TSSOP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 301;
n_interrupts = 30;
signature = 0x1e 0x93 0x29;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 1024;
offset = 0x3c00;
;
;
#------------------------------------------------------------
# ATtiny826
#------------------------------------------------------------
part parent ".avr8x_tiny" # t826
desc = "ATtiny826";
id = "t826";
variants =
"ATtiny826: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-MF: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-MFR: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-MU: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-MUR: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-SF: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-SFR: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-XF: SSOP20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-XFR: SSOP20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-XU: SSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny826-XUR: SSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 302;
n_interrupts = 30;
signature = 0x1e 0x93 0x28;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 1024;
offset = 0x3c00;
;
;
#------------------------------------------------------------
# ATtiny827
#------------------------------------------------------------
part parent ".avr8x_tiny" # t827
desc = "ATtiny827";
id = "t827";
variants =
"ATtiny827: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny827-MF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny827-MFR: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny827-MU: VQFN24, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny827-MUR: VQFN24, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 303;
n_interrupts = 30;
signature = 0x1e 0x93 0x27;
memory "eeprom"
size = 128;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 1024;
offset = 0x3c00;
;
;
#------------------------------------------------------------
# ATtiny1624
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1624
desc = "ATtiny1624";
id = "t1624";
variants =
"ATtiny1624: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1624-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1624-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1624-SSU: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1624-SSUR: SOIC14, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1624-XF: TSSOP14, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1624-XFR: TSSOP14, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1624-XU: TSSOP14, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1624-XUR: TSSOP14, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 310;
n_interrupts = 30;
signature = 0x1e 0x94 0x2a;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATtiny1626
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1626
desc = "ATtiny1626";
id = "t1626";
variants =
"ATtiny1626: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-MF: VQFN20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-MFR: VQFN20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-MU: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-MUR: VQFN20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-SF: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-SFR: SOIC20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-XF: SSOP20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-XFR: SSOP20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-XU: SSOP20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1626-XUR: SSOP20, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 311;
n_interrupts = 30;
signature = 0x1e 0x94 0x29;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATtiny1627
#------------------------------------------------------------
part parent ".avr8x_tiny" # t1627
desc = "ATtiny1627";
id = "t1627";
variants =
"ATtiny1627: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1627-MF: VQFN24, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1627-MFR: VQFN24, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]",
"ATtiny1627-MU: VQFN24, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny1627-MUR: VQFN24, Fmax=20 MHz, T=[-40 C, N/A], Vcc=[1.8 V, 5.5 V]";
mcuid = 312;
n_interrupts = 30;
signature = 0x1e 0x94 0x28;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATtiny3224
#------------------------------------------------------------
part parent ".avr8x_tiny" # t3224
desc = "ATtiny3224";
id = "t3224";
variants =
"ATtiny3224: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3224-SSF: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3224-SSFR: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3224-SSU: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3224-SSUR: SOIC14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3224-XF: TSSOP14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3224-XFR: TSSOP14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3224-XU: TSSOP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3224-XUR: TSSOP14, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 316;
n_interrupts = 30;
signature = 0x1e 0x95 0x28;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 3072;
offset = 0x3400;
;
;
#------------------------------------------------------------
# ATtiny3226
#------------------------------------------------------------
part parent ".avr8x_tiny" # t3226
desc = "ATtiny3226";
id = "t3226";
variants =
"ATtiny3226: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-MF: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-MFR: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-MU: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-MUR: VQFN20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-SF: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-SFR: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-SU: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-SUR: SOIC20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-XF: SSOP20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-XFR: SSOP20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-XU: SSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3226-XUR: SSOP20, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 317;
n_interrupts = 30;
signature = 0x1e 0x95 0x27;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 3072;
offset = 0x3400;
;
;
#------------------------------------------------------------
# ATtiny3227
#------------------------------------------------------------
part parent ".avr8x_tiny" # t3227
desc = "ATtiny3227";
id = "t3227";
variants =
"ATtiny3227: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3227-MF: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3227-MFR: VQFN24, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3227-MU: VQFN24, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATtiny3227-MUR: VQFN24, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 318;
n_interrupts = 30;
signature = 0x1e 0x95 0x26;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x8000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xdd;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 3072;
offset = 0x3400;
;
;
#------------------------------------------------------------
# ATmega808
#------------------------------------------------------------
part parent ".avr8x_tiny" # m808
desc = "ATmega808";
id = "m808";
variants =
"ATmega808-AF: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-AFR: TQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-MF: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-MFR: QFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-MU: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-XF: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-XFR: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-XU: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega808-XUR: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 319;
n_interrupts = 36;
signature = 0x1e 0x93 0x26;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x4000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xc9;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 1024;
offset = 0x3c00;
;
;
#------------------------------------------------------------
# ATmega809
#------------------------------------------------------------
part parent ".avr8x_tiny" # m809
desc = "ATmega809";
id = "m809";
variants =
"ATmega809-AF: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega809-AFR: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega809-AU: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega809-AUR: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega809-MF: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega809-MFR: QFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega809-MU: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega809-MUR: VQFN48, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 320;
n_interrupts = 40;
signature = 0x1e 0x93 0x2a;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x4000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xc9;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 1024;
offset = 0x3c00;
;
;
#------------------------------------------------------------
# ATmega1608
#------------------------------------------------------------
part parent ".avr8x_tiny" # m1608
desc = "ATmega1608";
id = "m1608";
variants =
"ATmega1608-AF: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-AFR: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-MF: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-MFR: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-MU: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-XF: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-XFR: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-XU: SSOP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1608-XUR: SSOP28, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 321;
n_interrupts = 36;
signature = 0x1e 0x94 0x27;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x4000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xc9;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATmega1609
#------------------------------------------------------------
part parent ".avr8x_tiny" # m1609
desc = "ATmega1609";
id = "m1609";
variants =
"ATmega1609-AF: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1609-AFR: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1609-AU: TQFP48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1609-AUR: TQFP48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1609-MF: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1609-MFR: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1609-MU: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega1609-MUR: VQFN48, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 322;
n_interrupts = 40;
signature = 0x1e 0x94 0x26;
memory "eeprom"
size = 256;
page_size = 32;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x4000;
readsize = 256;
;
memory "fuse5"
bitmask = 0xc9;
;
memory "lock"
initval = 0xc5;
;
memory "sram"
size = 2048;
offset = 0x3800;
;
;
#------------------------------------------------------------
# ATmega3208
#------------------------------------------------------------
part parent ".avr8x_mega" # m3208
desc = "ATmega3208";
id = "m3208";
variants =
"ATmega3208-AF: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-AFR: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-MF: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-MFR: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-MU: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-XF: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-XFR: SSOP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-XU: SSOP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3208-XUR: SSOP28, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 323;
n_interrupts = 36;
signature = 0x1e 0x95 0x30;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x4000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "prodsig"
size = 128;
page_size = 128;
readsize = 128;
;
memory "sram"
size = 4096;
offset = 0x3000;
;
;
#------------------------------------------------------------
# ATmega3209
#------------------------------------------------------------
part parent ".avr8x_mega" # m3209
desc = "ATmega3209";
id = "m3209";
variants =
"ATmega3209-AF: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3209-AFR: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3209-AU: TQFP48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3209-AUR: TQFP48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3209-MF: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3209-MFR: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3209-MU: VQFN48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega3209-MUR: VQFN48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 324;
n_interrupts = 40;
signature = 0x1e 0x95 0x31;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 128;
offset = 0x4000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "prodsig"
size = 128;
page_size = 128;
readsize = 128;
;
memory "sram"
size = 4096;
offset = 0x3000;
;
;
#------------------------------------------------------------
# ATmega4808
#------------------------------------------------------------
part parent ".avr8x_mega" # m4808
desc = "ATmega4808";
id = "m4808";
variants =
"ATmega4808-AF: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-AFR: TQFP32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-AU: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-AUR: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-MF: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-MFR: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-MU: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-MUR: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-XF: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-XFR: SSOP28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-XU: SSOP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4808-XUR: SSOP28, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]";
mcuid = 325;
n_interrupts = 36;
signature = 0x1e 0x96 0x50;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0xc000;
page_size = 128;
offset = 0x4000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "prodsig"
size = 128;
page_size = 128;
readsize = 128;
;
memory "sram"
size = 6144;
offset = 0x2800;
;
;
#------------------------------------------------------------
# ATmega4809
#------------------------------------------------------------
part parent ".avr8x_mega" # m4809
desc = "ATmega4809";
id = "m4809";
variants =
"ATmega4809-AF: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4809-AFR: TQFP48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4809-AU: TQFP48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4809-AUR: TQFP48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4809-MF: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4809-MFR: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4809-MU: VQFN48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4809-MUR: VQFN48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"ATmega4809-PF: PDIP40, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 326;
n_interrupts = 40;
signature = 0x1e 0x96 0x51;
memory "eeprom"
size = 256;
page_size = 64;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0xc000;
page_size = 128;
offset = 0x4000;
readsize = 256;
;
memory "lock"
initval = 0xc5;
;
memory "prodsig"
size = 128;
page_size = 128;
readsize = 128;
;
memory "sram"
size = 6144;
offset = 0x2800;
;
;
#------------------------------------------------------------
# AVR-Dx family common values
#------------------------------------------------------------
part # .avrdx
desc = "AVR-Dx family common values";
id = ".avrdx";
family_id = "AVR ";
prog_modes = PM_SPM | PM_UPDI;
n_boot_sections = 1;
boot_section_size = 512;
# Dedicated UPDI pin, no HV
hvupdi_variant = 1;
nvm_base = 0x1000;
ocd_base = 0x0f80;
syscfg_base = 0x0f00;
factory_fcpu = 4000000;
memory "fuses"
size = 16;
offset = 0x1050;
readsize = 1;
;
memory "fuse0"
size = 1;
initval = 0x00;
offset = 0x1050;
readsize = 1;
;
memory "wdtcfg"
alias "fuse0";
;
memory "fuse1"
size = 1;
initval = 0x00;
offset = 0x1051;
readsize = 1;
;
memory "bodcfg"
alias "fuse1";
;
memory "fuse2"
size = 1;
initval = 0x00;
bitmask = 0x07;
offset = 0x1052;
readsize = 1;
;
memory "osccfg"
alias "fuse2";
;
memory "fuse5"
size = 1;
initval = 0xc0;
bitmask = 0xed;
offset = 0x1055;
readsize = 1;
;
memory "syscfg0"
alias "fuse5";
;
memory "fuse6"
size = 1;
initval = 0x08;
bitmask = 0x1f;
offset = 0x1056;
readsize = 1;
;
memory "syscfg1"
alias "fuse6";
;
memory "fuse7"
size = 1;
initval = 0x00;
offset = 0x1057;
readsize = 1;
;
memory "codesize"
alias "fuse7";
;
memory "append"
alias "fuse7";
;
memory "fuse8"
size = 1;
initval = 0x00;
offset = 0x1058;
readsize = 1;
;
memory "bootsize"
alias "fuse8";
;
memory "bootend"
alias "fuse8";
;
memory "lock"
size = 4;
offset = 0x1040;
readsize = 4;
;
memory "prodsig"
size = 128;
page_size = 128;
offset = 0x1100;
readsize = 128;
;
memory "sigrow"
alias "prodsig";
;
memory "signature"
size = 3;
offset = 0x1100;
readsize = 3;
;
memory "tempsense"
size = 4;
offset = 0x1104;
readsize = 1;
;
memory "sernum"
size = 16;
offset = 0x1110;
readsize = 1;
;
memory "userrow"
size = 32;
page_size = 32;
offset = 0x1080;
readsize = 32;
;
memory "usersig"
alias "userrow";
;
memory "io"
size = 4160;
readsize = 1;
;
memory "sib"
size = 32;
readsize = 1;
;
;
#------------------------------------------------------------
# AVR32DA28
#------------------------------------------------------------
part parent ".avrdx" # 32da28
desc = "AVR32DA28";
id = "32da28";
variants =
"AVR32DA28: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28-E/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28T-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28T-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28T-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA28T-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 338;
n_interrupts = 41;
signature = 0x1e 0x95 0x34;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32DA32
#------------------------------------------------------------
part parent ".avrdx" # 32da32
desc = "AVR32DA32";
id = "32da32";
variants =
"AVR32DA32: QFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA32-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA32-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA32T-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA32T-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA32T-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA32T-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 342;
n_interrupts = 44;
signature = 0x1e 0x95 0x33;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32DA48
#------------------------------------------------------------
part parent ".avrdx" # 32da48
desc = "AVR32DA48";
id = "32da48";
variants =
"AVR32DA48: QFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA48-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA48-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA48-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA48-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA48T-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA48T-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA48T-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DA48T-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 346;
n_interrupts = 58;
signature = 0x1e 0x95 0x32;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR64DA28
#------------------------------------------------------------
part parent ".avrdx" # 64da28
desc = "AVR64DA28";
id = "64da28";
variants =
"AVR64DA28: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28-E/SP: SPDIP28, Fmax=N/A, T=[N/A, N/A], Vcc=[N/A, N/A]",
"AVR64DA28-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28T-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28T-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28T-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA28T-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 351;
n_interrupts = 41;
signature = 0x1e 0x96 0x15;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DA32
#------------------------------------------------------------
part parent ".avrdx" # 64da32
desc = "AVR64DA32";
id = "64da32";
variants =
"AVR64DA32: QFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA32-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA32-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA32T-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA32T-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA32T-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA32T-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 355;
n_interrupts = 44;
signature = 0x1e 0x96 0x14;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DA48
#------------------------------------------------------------
part parent ".avrdx" # 64da48
desc = "AVR64DA48";
id = "64da48";
variants =
"AVR64DA48: QFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA48-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA48-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA48-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA48-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA48T-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA48T-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA48T-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA48T-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 359;
n_interrupts = 58;
signature = 0x1e 0x96 0x13;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DA64
#------------------------------------------------------------
part parent ".avrdx" # 64da64
desc = "AVR64DA64";
id = "64da64";
variants =
"AVR64DA64: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA64-E/MR: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA64-E/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA64-I/MR: QFN64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA64-I/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA64T-E/MR: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA64T-E/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA64T-I/MR: QFN64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DA64T-I/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 362;
n_interrupts = 64;
signature = 0x1e 0x96 0x12;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR128DA28
#------------------------------------------------------------
part parent ".avrdx" # 128da28
desc = "AVR128DA28";
id = "128da28";
variants =
"AVR128DA28: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28-E/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28T-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28T-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28T-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA28T-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 364;
n_interrupts = 41;
signature = 0x1e 0x97 0x0a;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 0x4000;
offset = 0x4000;
;
;
#------------------------------------------------------------
# AVR128DA32
#------------------------------------------------------------
part parent ".avrdx" # 128da32
desc = "AVR128DA32";
id = "128da32";
variants =
"AVR128DA32: QFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA32-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA32-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA32T-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA32T-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA32T-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA32T-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 366;
n_interrupts = 44;
signature = 0x1e 0x97 0x09;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 0x4000;
offset = 0x4000;
;
;
#------------------------------------------------------------
# AVR128DA48
#------------------------------------------------------------
part parent ".avrdx" # 128da48
desc = "AVR128DA48";
id = "128da48";
variants =
"AVR128DA48: QFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA48-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA48-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA48-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA48-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA48T-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA48T-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA48T-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA48T-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 368;
n_interrupts = 58;
signature = 0x1e 0x97 0x08;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 0x4000;
offset = 0x4000;
;
;
#------------------------------------------------------------
# AVR128DA64
#------------------------------------------------------------
part parent ".avrdx" # 128da64
desc = "AVR128DA64";
id = "128da64";
variants =
"AVR128DA64: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA64-E/MR: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA64-E/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA64-I/MR: QFN64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA64-I/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA64T-E/MR: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA64T-E/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA64T-I/MR: QFN64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DA64T-I/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
family_id = " AVR";
mcuid = 370;
n_interrupts = 64;
signature = 0x1e 0x97 0x07;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse6"
initval = 0x00;
bitmask = 0x07;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 0x4000;
offset = 0x4000;
;
;
#------------------------------------------------------------
# AVR32DB28
#------------------------------------------------------------
part parent ".avrdx" # 32db28
desc = "AVR32DB28";
id = "32db28";
variants =
"AVR32DB28: SOIC28, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28-E/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28T-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28T-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28T-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB28T-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 339;
n_interrupts = 42;
signature = 0x1e 0x95 0x37;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32DB32
#------------------------------------------------------------
part parent ".avrdx" # 32db32
desc = "AVR32DB32";
id = "32db32";
variants =
"AVR32DB32: QFN32, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB32-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB32-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB32T-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB32T-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB32T-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB32T-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 343;
n_interrupts = 44;
signature = 0x1e 0x95 0x36;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32DB48
#------------------------------------------------------------
part parent ".avrdx" # 32db48
desc = "AVR32DB48";
id = "32db48";
variants =
"AVR32DB48: QFN48, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB48-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB48-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB48-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB48-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB48T-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB48T-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB48T-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DB48T-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 347;
n_interrupts = 61;
signature = 0x1e 0x95 0x35;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR64DB28
#------------------------------------------------------------
part parent ".avrdx" # 64db28
desc = "AVR64DB28";
id = "64db28";
variants =
"AVR64DB28: SOIC28, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28-E/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28T-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28T-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28T-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB28T-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 352;
n_interrupts = 42;
signature = 0x1e 0x96 0x19;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DB32
#------------------------------------------------------------
part parent ".avrdx" # 64db32
desc = "AVR64DB32";
id = "64db32";
variants =
"AVR64DB32: QFN32, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB32-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB32-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB32T-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB32T-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB32T-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB32T-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 356;
n_interrupts = 44;
signature = 0x1e 0x96 0x18;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DB48
#------------------------------------------------------------
part parent ".avrdx" # 64db48
desc = "AVR64DB48";
id = "64db48";
variants =
"AVR64DB48: QFN48, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB48-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB48-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB48-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB48-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB48T-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB48T-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB48T-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB48T-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 360;
n_interrupts = 61;
signature = 0x1e 0x96 0x17;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DB64
#------------------------------------------------------------
part parent ".avrdx" # 64db64
desc = "AVR64DB64";
id = "64db64";
variants =
"AVR64DB64: QFN64, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB64-E/MR: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB64-E/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB64-I/MR: QFN64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB64-I/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB64T-E/MR: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB64T-E/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB64T-I/MR: QFN64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DB64T-I/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 363;
n_interrupts = 65;
signature = 0x1e 0x96 0x16;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR128DB28
#------------------------------------------------------------
part parent ".avrdx" # 128db28
desc = "AVR128DB28";
id = "128db28";
variants =
"AVR128DB28: SOIC28, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28-E/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28T-E/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28T-E/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28T-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB28T-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 365;
n_interrupts = 42;
signature = 0x1e 0x97 0x0e;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 0x4000;
offset = 0x4000;
;
;
#------------------------------------------------------------
# AVR128DB32
#------------------------------------------------------------
part parent ".avrdx" # 128db32
desc = "AVR128DB32";
id = "128db32";
variants =
"AVR128DB32: QFN32, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB32-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB32-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB32T-E/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB32T-E/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB32T-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB32T-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 367;
n_interrupts = 44;
signature = 0x1e 0x97 0x0d;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 0x4000;
offset = 0x4000;
;
;
#------------------------------------------------------------
# AVR128DB48
#------------------------------------------------------------
part parent ".avrdx" # 128db48
desc = "AVR128DB48";
id = "128db48";
variants =
"AVR128DB48: QFN48, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB48-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB48-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB48-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB48-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB48T-E/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB48T-E/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB48T-I/6LX: VQFN48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB48T-I/PT: TQFP48, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 369;
n_interrupts = 61;
signature = 0x1e 0x97 0x0c;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 0x4000;
offset = 0x4000;
;
;
#------------------------------------------------------------
# AVR128DB64
#------------------------------------------------------------
part parent ".avrdx" # 128db64
desc = "AVR128DB64";
id = "128db64";
variants =
"AVR128DB64: QFN64, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB64-E/MR: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB64-E/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB64-I/MR: QFN64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB64-I/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB64T-E/MR: QFN64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB64T-E/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB64T-I/MR: QFN64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR128DB64T-I/PT: TQFP64, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 371;
n_interrupts = 65;
signature = 0x1e 0x97 0x0b;
memory "eeprom"
size = 512;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x20000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 0x4000;
offset = 0x4000;
;
;
#------------------------------------------------------------
# AVR16DD14
#------------------------------------------------------------
part parent ".avrdx" # 16dd14
desc = "AVR16DD14";
id = "16dd14";
variants =
"AVR16DD14: SOIC14, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD14-I/SL: SOIC14, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 329;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x94 0x34;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 2048;
offset = 0x7800;
;
;
#------------------------------------------------------------
# AVR16DD20
#------------------------------------------------------------
part parent ".avrdx" # 16dd20
desc = "AVR16DD20";
id = "16dd20";
variants =
"AVR16DD20: QFN20, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD20-I/REB: VQFN20, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD20-I/SO: SOIC20, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 330;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x94 0x33;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 2048;
offset = 0x7800;
;
;
#------------------------------------------------------------
# AVR16DD28
#------------------------------------------------------------
part parent ".avrdx" # 16dd28
desc = "AVR16DD28";
id = "16dd28";
variants =
"AVR16DD28: SOIC28, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD28-I/STX: N/A, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 331;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x94 0x32;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 2048;
offset = 0x7800;
;
;
#------------------------------------------------------------
# AVR16DD32
#------------------------------------------------------------
part parent ".avrdx" # 16dd32
desc = "AVR16DD32";
id = "16dd32";
variants =
"AVR16DD32: QFN32, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR16DD32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 333;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x94 0x31;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 2048;
offset = 0x7800;
;
;
#------------------------------------------------------------
# AVR32DD14
#------------------------------------------------------------
part parent ".avrdx" # 32dd14
desc = "AVR32DD14";
id = "32dd14";
variants =
"AVR32DD14: SOIC14, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD14-I/SL: SOIC14, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 336;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x95 0x3b;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32DD20
#------------------------------------------------------------
part parent ".avrdx" # 32dd20
desc = "AVR32DD20";
id = "32dd20";
variants =
"AVR32DD20: QFN20, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD20-I/REB: VQFN20, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD20-I/SO: SOIC20, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 337;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x95 0x3a;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32DD28
#------------------------------------------------------------
part parent ".avrdx" # 32dd28
desc = "AVR32DD28";
id = "32dd28";
variants =
"AVR32DD28: SOIC28, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD28-I/STX: N/A, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 340;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x95 0x39;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32DD32
#------------------------------------------------------------
part parent ".avrdx" # 32dd32
desc = "AVR32DD32";
id = "32dd32";
variants =
"AVR32DD32: QFN32, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR32DD32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 344;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x95 0x38;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR64DD14
#------------------------------------------------------------
part parent ".avrdx" # 64dd14
desc = "AVR64DD14";
id = "64dd14";
variants =
"AVR64DD14: SOIC14, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DD14-I/SL: SOIC14, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 349;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x96 0x1d;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DD20
#------------------------------------------------------------
part parent ".avrdx" # 64dd20
desc = "AVR64DD20";
id = "64dd20";
variants =
"AVR64DD20: QFN20, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DD20-I/SO: SOIC20, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 350;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x96 0x1c;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DD28
#------------------------------------------------------------
part parent ".avrdx" # 64dd28
desc = "AVR64DD28";
id = "64dd28";
variants =
"AVR64DD28: SOIC28, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DD28-I/SO: SOIC28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DD28-I/SP: SPDIP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DD28-I/SS: SSOP28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DD28-I/STX: VQFN28, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 353;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x96 0x1b;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DD32
#------------------------------------------------------------
part parent ".avrdx" # 64dd32
desc = "AVR64DD32";
id = "64dd32";
variants =
"AVR64DD32: QFN32, Fmax=32 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DD32-I/PT: TQFP32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DD32-I/RXB: VQFN32, Fmax=24 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 357;
n_interrupts = 36;
hvupdi_variant = 2;
signature = 0x1e 0x96 0x1a;
memory "eeprom"
size = 256;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 512;
offset = 0x800000;
readsize = 256;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 8192;
offset = 0x6000;
;
;
#------------------------------------------------------------
# AVR64DU28
#------------------------------------------------------------
part parent "64dd28" # 64du28
desc = "AVR64DU28";
id = "64du28";
variants =
"AVR64DU28-SSOP/SPDIP: DIP28, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64DU28-VQFN: QFP28, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 384;
n_interrupts = 34;
signature = 0x1e 0x96 0x22;
memory "fuse5"
bitmask = 0xfb;
;
memory "fuse6"
bitmask = 0x0f;
;
memory "fusea"
size = 2;
initval = 0x03;
bitmask = 0xfff3;
offset = 0x105a;
readsize = 1;
;
memory "pdicfg"
alias "fusea";
;
memory "prodsig"
offset = 0x1080;
;
memory "signature"
offset = 0x1080;
;
memory "tempsense"
offset = 0x1084;
;
memory "sernum"
offset = 0x1090;
;
memory "bootrow"
size = 256;
page_size = 256;
offset = 0x1100;
readsize = 256;
;
memory "userrow"
size = 512;
page_size = 512;
offset = 0x1200;
;
;
#------------------------------------------------------------
# AVR64DU32
#------------------------------------------------------------
part parent "64du28" # 64du32
desc = "AVR64DU32";
id = "64du32";
variants =
"AVR64DU32-VQFN/TQFP: QFP32, Fmax=32 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 385;
signature = 0x1e 0x96 0x21;
;
#------------------------------------------------------------
# AVR-Ex family common values
#------------------------------------------------------------
part parent ".avrdx" # .avrex
desc = "AVR-Ex family common values";
id = ".avrex";
# Shared UPDI pin, HV on _RESET
hvupdi_variant = 2;
factory_fcpu = 20000000;
memory "fuse2"
bitmask = 0x08;
;
memory "fuse5"
initval = 0xd0;
bitmask = 0xf9;
;
memory "fuse6"
initval = 0x07;
bitmask = 0x07;
;
memory "userrow"
size = 64;
page_size = 64;
readsize = 64;
;
;
#------------------------------------------------------------
# AVR8EA28
#------------------------------------------------------------
part parent ".avrex" # 8ea28
desc = "AVR8EA28";
id = "8ea28";
mcuid = 327;
signature = 0x1e 0x93 0x2c;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "fuse0"
initval = -1;
;
memory "fuse1"
initval = -1;
;
memory "fuse2"
initval = -1;
bitmask = -1;
;
memory "fuse5"
initval = -1;
bitmask = -1;
;
memory "fuse6"
initval = -1;
bitmask = -1;
;
memory "fuse7"
initval = -1;
;
memory "fuse8"
initval = -1;
;
;
#------------------------------------------------------------
# AVR8EA32
#------------------------------------------------------------
part parent ".avrex" # 8ea32
desc = "AVR8EA32";
id = "8ea32";
mcuid = 328;
signature = 0x1e 0x93 0x2b;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 8192;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "fuse0"
initval = -1;
;
memory "fuse1"
initval = -1;
;
memory "fuse2"
initval = -1;
bitmask = -1;
;
memory "fuse5"
initval = -1;
bitmask = -1;
;
memory "fuse6"
initval = -1;
bitmask = -1;
;
memory "fuse7"
initval = -1;
;
memory "fuse8"
initval = -1;
;
;
#------------------------------------------------------------
# AVR16EA28
#------------------------------------------------------------
part parent ".avrex" # 16ea28
desc = "AVR16EA28";
id = "16ea28";
variants =
"AVR16EA28: SOIC28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 332;
n_interrupts = 37;
signature = 0x1e 0x94 0x37;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 2048;
offset = 0x7800;
;
;
#------------------------------------------------------------
# AVR16EA32
#------------------------------------------------------------
part parent ".avrex" # 16ea32
desc = "AVR16EA32";
id = "16ea32";
variants =
"AVR16EA32: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 334;
n_interrupts = 37;
signature = 0x1e 0x94 0x36;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 2048;
offset = 0x7800;
;
;
#------------------------------------------------------------
# AVR16EA48
#------------------------------------------------------------
part parent ".avrex" # 16ea48
desc = "AVR16EA48";
id = "16ea48";
variants =
"AVR16EA48: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 335;
n_interrupts = 45;
signature = 0x1e 0x94 0x35;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 2048;
offset = 0x7800;
;
;
#------------------------------------------------------------
# AVR32EA28
#------------------------------------------------------------
part parent ".avrex" # 32ea28
desc = "AVR32EA28";
id = "32ea28";
variants =
"AVR32EA28: SOIC28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 341;
n_interrupts = 37;
signature = 0x1e 0x95 0x3e;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32EA32
#------------------------------------------------------------
part parent ".avrex" # 32ea32
desc = "AVR32EA32";
id = "32ea32";
variants =
"AVR32EA32: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 345;
n_interrupts = 37;
signature = 0x1e 0x95 0x3d;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR32EA48
#------------------------------------------------------------
part parent ".avrex" # 32ea48
desc = "AVR32EA48";
id = "32ea48";
variants =
"AVR32EA48: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 348;
n_interrupts = 45;
signature = 0x1e 0x95 0x3c;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x8000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 4096;
offset = 0x7000;
;
;
#------------------------------------------------------------
# AVR64EA28
#------------------------------------------------------------
part parent ".avrex" # 64ea28
desc = "AVR64EA28";
id = "64ea28";
variants =
"AVR64EA28: SOIC28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64EA28-I/SP: SPDIP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64EA28-I/SS: SSOP28, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 354;
n_interrupts = 37;
signature = 0x1e 0x96 0x20;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 6144;
offset = 0x6800;
;
;
#------------------------------------------------------------
# AVR64EA32
#------------------------------------------------------------
part parent ".avrex" # 64ea32
desc = "AVR64EA32";
id = "64ea32";
variants =
"AVR64EA32: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64EA32-I/PT: TQFP32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64EA32-I/RXB: VQFN32, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 358;
n_interrupts = 37;
signature = 0x1e 0x96 0x1f;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 6144;
offset = 0x6800;
;
;
#------------------------------------------------------------
# AVR64EA48
#------------------------------------------------------------
part parent ".avrex" # 64ea48
desc = "AVR64EA48";
id = "64ea48";
variants =
"AVR64EA48: VQFN48, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR64EA48-I/6LX: VQFN48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]",
"AVR64EA48-I/PT: TQFP48, Fmax=20 MHz, T=[-40 C, 85 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 361;
n_interrupts = 45;
signature = 0x1e 0x96 0x1e;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x10000;
page_size = 128;
offset = 0x800000;
readsize = 256;
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "sram"
size = 6144;
offset = 0x6800;
;
;
#------------------------------------------------------------
# AVR16EB14
#------------------------------------------------------------
part parent ".avrex" # 16eb14
desc = "AVR16EB14";
id = "16eb14";
variants =
"AVR16EB14-SOIC/TSSOP: SOIC14, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 380;
n_interrupts = 31;
signature = 0x1e 0x94 0x49;
memory "eeprom"
size = 512;
page_size = 8;
offset = 0x1400;
readsize = 256;
;
memory "flash"
size = 0x4000;
page_size = 64;
offset = 0x800000;
readsize = 256;
;
memory "fusea"
size = 2;
initval = 0x03;
bitmask = 0xfff3;
offset = 0x105a;
readsize = 1;
;
memory "pdicfg"
alias "fusea";
;
memory "lock"
initval = 0x5cc5c55c;
;
memory "prodsig"
offset = 0x1080;
;
memory "signature"
offset = 0x1080;
;
memory "tempsense"
offset = 0x1084;
;
memory "sernum"
offset = 0x1090;
;
memory "bootrow"
size = 64;
page_size = 64;
offset = 0x1100;
readsize = 256;
;
memory "userrow"
offset = 0x1200;
;
memory "sram"
size = 2048;
offset = 0x7800;
;
;
#------------------------------------------------------------
# AVR16EB20
#------------------------------------------------------------
part parent "16eb14" # 16eb20
desc = "AVR16EB20";
id = "16eb20";
variants =
"AVR16EB20-SSOP: SOIC20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR16EB20-VQFN: VQFN20, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 381;
signature = 0x1e 0x94 0x40;
;
#------------------------------------------------------------
# AVR16EB28
#------------------------------------------------------------
part parent "16eb14" # 16eb28
desc = "AVR16EB28";
id = "16eb28";
variants =
"AVR16EB28-SSOP/SPDIP: SOIC28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]",
"AVR16EB28-VQFN: VQFN28, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 382;
signature = 0x1e 0x94 0x3f;
;
#------------------------------------------------------------
# AVR16EB32
#------------------------------------------------------------
part parent "16eb14" # 16eb32
desc = "AVR16EB32";
id = "16eb32";
variants =
"AVR16EB32-VQFN/TQFP: VQFN32, Fmax=20 MHz, T=[-40 C, 125 C], Vcc=[1.8 V, 5.5 V]";
mcuid = 383;
signature = 0x1e 0x94 0x3e;
;
#------------------------------------------------------------
# Logic Green parts
#------------------------------------------------------------
part parent "m88" # lgt8f88p
desc = "LGT8F88P";
id = "lgt8f88p";
mcuid = 227;
signature = 0x1e 0x93 0x0f;
autobaud_sync = 0x1c;
memory "lfuse"
initval = -1;
;
memory "hfuse"
initval = -1;
;
memory "efuse"
initval = -1;
bitmask = -1;
;
memory "lock"
initval = -1;
bitmask = -1;
;
;
#------------------------------------------------------------
# LGT8F168P
#------------------------------------------------------------
part parent "m168" # lgt8f168p
desc = "LGT8F168P";
id = "lgt8f168p";
mcuid = 228;
signature = 0x1e 0x94 0x0b;
autobaud_sync = 0x1c;
memory "lfuse"
initval = -1;
;
memory "hfuse"
initval = -1;
;
memory "efuse"
initval = -1;
bitmask = -1;
;
memory "lock"
initval = -1;
bitmask = -1;
;
;
#------------------------------------------------------------
# LGT8F328P
#------------------------------------------------------------
part parent "m328" # lgt8f328p
desc = "LGT8F328P";
id = "lgt8f328p";
mcuid = 229;
signature = 0x1e 0x95 0x0f;
autobaud_sync = 0x1c;
memory "lfuse"
initval = -1;
;
memory "hfuse"
initval = -1;
;
memory "efuse"
initval = -1;
bitmask = -1;
;
memory "lock"
initval = -1;
bitmask = -1;
;
;
Reference in New Issue Copy Permalink